Eyedro E5B-M-GWE3 User manual

Visit eyedro.com for any questions or
comments. We value your feedback.
Quick Start Guide
Wireless Mesh Energy Monitoring
System (includes gateway)
(3-Phase only)
Model: E5B-M-GWE3
Before Getting Started
This insert provides very high level installa-
tion instructions. Complete installation in-
structions can be found at eyedro.com/
support (see Product Manual and
Support videos)
Installation may require the cover of the main electrical panel to
be removed while some wires are still electrified. Even when
the main breaker has been turned ‘OFF’ certain areas of the
panel may still be dangerous and carry the risk of shock, burn,
and electrocution. Installation should be performed by a quali-
fied electrician. DO NOT attempt installation unless you
know where electrified areas within the panel are.
Notes:
1. Always use the power adapters that came with
your E5B-M-GWE3 system.
2. Do not plug your Eyedro power adapter into an
Uninterruptible Power Supply (UPS) as this will
result in incorrect measurements.
3. The AC power adapter must be powered via a circuit
that is downstream of the panel where the current
sensors are installed.
Limited One Year Warranty
Eyedro Green Solutions Inc. warrants this
product for a period of one year from date of
purchase for all defects in material and work-
manship. Defective parts may be repaired or
replaced at the discretion of the manufacturer
during this period.
Full warranty policy details are available at
eyedro.com

Always use the correct
power adapter!
Use the 5VDC power adapter with the gateway
module:
Use the 6VAC power adapter with the sensor
module:
Support manuals and videos:
Eyedro.com/support
4. Create a MyEyedro User Account
4.1 Go to my.eyedro.com to create your online
account (or log in if you have an existing account).
4.2 Add the devices to your user account:
go to Configuration, select Devices then enter the
serial numbers you recorded in Step 2.
4.3 ENJOY! Log into MyEyedro as often as you like to
view your electricity consumption.
4.4 For more details about the MyEyedro cloud service,
review the MyEyedro User Guide located at
eyedro.com/support
Copyright © 2022, Eyedro Green Solutions Inc.
1. Verify Package Contents
Qty. Description
A1Eyedro gateway module
B1Eyedro sensor module (3 port)
C15VDC power adapter (gateway)
D16VAC power adapter (sensor)
E3200A current sensor (no sensors in-
cluded with –SUB systems)
F1Ethernet cable (3 ft.)
2. Record Serial Numbers:
(located under barcode on module)
3. Install Hardware
3.1 Install current sensors on the line1 conductor of
the circuits(s) to be monitored.
1Line/Live/Hot conductor(s)
3.2 Connect one end of the supplied Ethernet
cable to an open port on your router.
_ _ _ - _ _ _ _ _
Gateway SN:
_ _ _ - _ _ _ _ _
Sensor SN:
3.3 Connect current
sensors and power
adapter to the
sensor module.
3.4 Connect Ethernet
cable and power
adapter to the
gateway module.