Family Fun Companies Half Court Hoops Installation manual

Operation Manual‘’
1
Safety Instructions:
Repair and mantenance requires trained service personel.
Depending on the potentially hazardous degrees, the terms of NOTICE,
WARNING GAUTION, etc. are used. Be sure to understand the content of the
displays before reading the text.
High Voltage Warning:
High voltage can cause an electric shock.
Turn off power before servicing.
No Touching Warning:
This part may cause an electric shock or the
surface is overheating. Do not touch this part.
High Voltage Warning:
This part may caused by scalding if
somebody inadvertent to do something.

Operation Manual‘’
2
CONTENTS
1. Specifications ..............................................................................3.
2. Package contents .........................................................................4.
3. Assembling instruction ................................................................6.
4. Intallation ....................................................................................19.
5. Package .......................................................................................21.
6. Game descripiton .........................................................................22.
7. Switches control signal ...............................................................23
8. Parameter setting .........................................................................27
9. Game installation and service ......................................................33
10. Game maintenance .......................................................................34.
11. Overall structure ...........................................................................35.
12. I/Ochart .........................................................................................49
13.Wiring Diagram

Operation Manual‘’
3
1. Specifiactions：
Rated power supply：AC220V±10 50Hz or 110V±10 60Hz
（1） Power consumption：Min power consumption：90W
Max power consumption：200W
（2） Dimensions：W1030×D2200×H2243 (mm)
（3） Weight：about 260Kg
（4） Environment condition：（indoor）temperature ：-10℃~+40℃
Humidity ：≤90%
Atmospheric pressure ：86Pa~106 Pa
※Note ：Game parameters are subject change without notice.

Operation Manual‘’
4
2 Package contents
2.1 Make sure that all the parts shown below are included in the product package：：
NO Part No. Name Qty Illustartion
1 R102-001-000 Main cabinet 1
2 R102-002-000 Control panel 1
3 R102-003-000 Header 1
4 R102-004-000 Ball Gate Assy. 1
5 R102-005-000 Playfield 1
6 R102-006-000 Beam & back 1 1
7 R102-007-000 Beam & back 2 1
8 R102-101-000 Control panel
fix board 2
9 Spare parts 1 1 See below table for detail

Operation Manual‘’
5
2.2 Spare parts 1：
No Part No. Name Spec. Qty Illustration Note
1 R102-810-000 Power cord 15A/220V 3.5m 1
2 R102-429-000 Fuse 5A/250(10A/125V)
φ5-20 2
3 R102-730-000 Manual English 1
4 R102-423-000 Key 171 4
5 R102-422-000 Key 2222 2
6 R102-442-000 Bearing 6002Z 2
7 R102-303-000 Circlip GB/T894.2-1986/do
=16 2
8 R102-443-000 Air pin 2
9 R102-444-000 Basketball #5 8
10 R102-445-000 Pump 1
11 Hexagonal socket flat
round head screw M8×25 BLK 12
12 Hexagonal socket flat
round head screw M6×80 BLK 4
13 Hexagonal socket flat
round head screw M6×40 BLK 8
14 Cross hexagon head kit
bolt M8×20 BLK 8
15 Cross hexagon head kit
bolt M6×16 BLK 4
16 Hex lock net M8 BLK 12
17 Hex lock net M6 BLK 4
18 Flat washer M8 BLK 12
19 Flat washer M6 BLK 4
20 R102-409-000 Reflect paper 50×55 1
21 Spare screws 1

Operation Manual‘’
6
3. Assemble instruction：
3.1 Assemble screws part list：
No. Name Spec. Qty Illustration Note
1 Hexagonal socket flat
round head screw M8×25 BLK 12
2 Hexagonal socket flat
round head screw M6×80 BLK 4
3 Hexagonal socket flat
round head screw M6×40 BLK 8
4 Cross hexagon head
kit bolt M8×20 BLK 8
5 Cross hexagon head
kit bolt M6×16 BLK 4
6 Hex lock nut M8 BLK 12
7 Hex lock nut M6 BLK 4
8 Flat washer M8 BLK 12
9 Flat washer M6 BLK 4

Operation Manual‘’
7
3.2 Assemble steps：
Open the package and
take the main cabinet and
other parts out
Step 1

Operation Manual‘’
8
Open the front bracket
Step 2

Operation Manual‘’
9
Install contorl panel
Install the beam and b
r
acket 1
Install the beam and
b
racket 2
Install control panel fix board
Step 3

Operation Manual‘’
10
Those 4 bolts and nuts
are needed in step 6.
Please keep them.
Remove bolts and
take the front panel
assembly.
Step 4

Operation Manual‘’
11
Install ball gate assembly
Install playfield
Step 5

Operation Manual‘’
12
Install header assembly
Step 6

Operation Manual‘’
13
Step 7
Install front panel
Fix control panel
Step 7

Operation Manual‘’
14
Fix side bracket
Step 8

Operation Manual‘’
15
3.3 Layout on control panel：
Control panel：
Step 1：Connecting
.
Step 2：Connecting
Low voltage exit
Link wire “Link2” exit
High voltage exit
Link wire “Link 1” exit
Power cord exit
Low voltage wires
go through this
hole.
High voltage wires go
through this hole.
link1
link2
Power cord exit.
Connect the wires to the
PBC as per the numbers
marked on the PBC.

Operation Manual‘’
16
3.4 Link game：
There are two buttons on the control panel:

Link game button: Press this button to compete with others.
Start button: Press this button to start the game.
Link game schematic：
How to link games：Connect Link 2 (in Game ○ 1 ) to Link 1(in Game ○ 2).
Then connect Link 2(in Game ○
2 ) to Link 1(in Game ○ 3 ). The rest of the
connections are the same. [For more detail, please refer to page 28]
Connection illustration：
Link 2 Link 1
Game 1 Game 2

Operation Manual‘’
17
Notice ：
1. When linking the game, there should be one game set as game #1. Any of the
games can be set as game #1. The rest of the games can be #2 to #30 but you
cannot repeat.
2. 30 games can compete with each other in groups.
3. The first time to start the game, it will show “1IP01 V1.02”. The first “1”
means the group form. “IP01” means the NO1 machine.
4. NO1 machine will send it’s setting (excluding SW4) to the linking games after
a few seconds when game starts. It will reset when turned off.
5. The DIP SWITCH setting in other games should be the same as the game NO1
setting except the Game NO.
6. To set the JP value, you need to set on the game NO1.
3.5 Wiring layout：
In order to clear the layout in the machine, below is the instruction for you
reference：
Left side layout
Right side layout

Operation Manual‘’
18
3.6 Connecting the power cord:
¾Do not put heavy items on power cord.
¾Do not touch the power plug with a wet hand.
¾Do not draw or twist the cord.
¾Do not place the cord near a heat source.
¾Do not place the cord where the player can easily touch or kick it.
¾Run this machine with the correct power configuration.
Notice
The extra Light Belt is wrapped with Nylon tape.
Power socket
Power box
Power plug
Power
Power plug

Operation Manual‘’
19
4. Installation：
4.1 Locations to avoid installing：
4.2 Game leveling：
Install this machine on a flat surface. Adjust levelers to lift casters off the ground and
level game.
This machine is designed for indoor use only. Never install this machine
outdoors or any of the following:
zPlaces where dew may develop due to temperature differences;
zLocations close to hazardous article;
zLocations close to a heating instrument;
zClose to instruments that can easily catch fire;
zUnstable or vibrating places;
Warning
Indoor use only!
WARNING
about
固
移
Move Fix
Leveller Caster
About 5mm