Fantini Cosmi CH180-230V User manual

CH180-230V
TOUCH-SCREEN PROGRAMMABLE
THERMOSTAT
INSTRUCTIONS FOR USE
Fantini Cosmi S.p.a. Via dell’Osio, 6 20049 Caleppio di Settala MI - ITALY
Tel. [phone] I Fax [phone] I [e-mail] I http://www.fantinicosmi.it
Technical support: supportotecnic[email protected]
EXPORT DEPARTMENT Tel. ++39 02 95682222 I [e-mail]

2
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
CH180-230V
Thank you for purchasing a FANTINI COSMI S.p.A. product.
Read this instructions manual carefully and always keep it handy for any consultation.
The documentation reflects the characteristics of the product. However, due to regulatory or commercial changes,
customers are advised to check the availability of updates to this documentation on the website atFANTINI COSMI S.p.A.:
pdf.fantinicosmi.it
OPERATION
The CH180-230V is a programmable thermostat for controlling heating and/or cooling systems.
It has a customised temperature program on a time profile for every season, which can be changed as needed.
The positive LCD display with white backlighting can also show an intuitive graph of the energy consumption of the entire
system.
CONTENTS OF PACKAGE
■1 programmable thermostat
■2 6/32UNC American standard thread screws to secure onto 503 flush mounting box (approximately Ø 3.5mm)
■1 quick guide

3
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
CH180-230V
DESCRIPTION OF DISPLAY KEYS
1 Day of the week
2 Activation status: air conditioning or heating
3 Measured room temperature (Celsius/Fahrenheit)
4 Multi-function touch icons
5 Operating mode
6 Bar graph for viewing messages and daily programming
The function of the multi-function keys varies depending on the situation and is described by the symbol which appears
on the display near the key itself.
The first press of any touch button allows you to activate the
functions of the buttons themselves and to light up the display.
SEL TEMP PROG DISP JOLLYOFF
ENTER COPY
[ MAN ]
[ JOLLY ]
[ HOLIDAY ]
[ AUTO ]
DAY
1 2
5
6
4
3

4
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
CH180-230V
TECHNICAL FEATURES
Temperature adjustment scale 2 - 40°C, increase 0.1°C
Measurement scale/room T display - 50 - + 50 °C
Power supply 230V 50 Hz
Type of output
1 relay with potential-free change-over contact (COM/NA/NC)
3 screw terminals (closed + open)
Relay contact range 5(3)A 250 Vca
Type of action 1 B.U. (micro connection)
Software class A
Minimum adjusting differential STD- 0.3 - 5 K
Reference thermal gradient 4 K/h
Maximum room temperature 45°C
Storage temperature -10°C - +60°C
Electric insulation Double insulation
Protection rating IP40
Pollution rating 2
Pulse voltage 4000V
Assembly wall-mounted or on flush mounting box
Dimensions 127 x 82 x 24 mm
Compliant with standards EN 60730-1 and second parts
ErP classification ■ErP Class IV; 2%
[Reg. EU 811/2013 - 813/2013]
Compliant with Directive Directive 2014/53/EU (RED)
Product made in Italy

5
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
CH180-230V
Summary
OPERATION ..................................................................... 2
CONTENTS OF PACKAGE................................................. 2
DESCRIPTION OF DISPLAY KEYS .................................... 3
TECHNICAL FEATURES ................................................... 4
1 - INSTALLATION ........................................................... 6
2 - ELECTRICAL CONNECTION........................................ 8
3 - QUICK PROGRAMMING GUIDE (PROG)....................... 9
3.1 - DATE AND TIME SETTING ....................................................9
3.2 - WINTER/SUMMER SETTING ..............................................10
3.3 - HOURLY PROGRAMMING SETTING (PROFILE)..................10
3.4 - SETTING THE DISPLAY.......................................................12
3.5 - SETTING KEYBOARD LOCK WITH PASSWORD ..................13
4 - OPERATION (SEL)..................................................... 14
4.1 - OPERATING PROGRAMS ....................................................14
4.2 - SELECTING THE OPERATING PROGRAM...........................15
4.3 - “JOLLY” PROGRAM SETTING..............................................16
4.4 - SETTING “AUTO” and “HOLIDAY” PROGRAM
TEMPERATURE ...........................................................................17
4.5 - SETTING “MANUAL” and “JOLLY” PROGRAM TEMPERATURE ...17
5 - PARAMETER DISPLAY (DISP) ................................... 18
5.1 - DATE AND TIME..................................................................18
5.2 - SEASON ..............................................................................18
5.3 - PROFILE..............................................................................19
5.4 - HOURS OF USE...................................................................20
6 - ADVANCED FUNCTIONS (PROG) .............................. 21
6.1 - SECONDS DISPLAY STAYS ON ...........................................21
6.2 - DISPLAY INTENSITY ...........................................................21
6.3 - DAYLIGHT SAVINGS TIME...................................................22
6.4 - ANTIFREEZE TEMPERATURE ............................................22
6.5 - ROOM TEMPERATURE CORRECTION ................................23
6.6 - DIFFERENTIAL MANAGEMENT..........................................23
6.7 - CELSIUS / FAHRENHEIT ....................................................24
6.8 - LANGUAGE .........................................................................24
6.9 - CHG ....................................................................................25
6.10 - TECHNICAL.......................................................................25
6.11 - RESETTING DEFAULT PARAMETERS...............................26
7 - DISPOSAL................................................................. 27
8 - GENERAL WARRANTY CONDITIONS ........................ 27

mm mm
mm
6
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
CH180-230V
1 - INSTALLATION
ATTENTION!
Installation must be carried out by qualified personnel in compliance with the requirements concerning
the installation of electrical devices.
ATTENTION!
Make sure that the power supply is disconnected before performing installation.
The CH180-230V programmable thermostat must be installed on the wall or on a flush mounting box, in 3 units or round,
at a height of about 1.5m from the floor, in a suitable position to detect the room temperature correctly.
1.5 m
OK
NO NO

LN 21 4
230V~
5(3)A 250v~
LN 21 4
230V~
5(3)A 250v~
LN 21 4
230V~
5(3)A 250v~
LN 21 4
230V~
5(3)A 250v~
2
1
3 4
5 6
87
7
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
CH180-230V
Pry the back panel off the body by applying pressure to the specific groove at the bottom.
Remove the insulating protection by unscrewing the specific waterproof screw.
Make the electrical connections (refer to the “Electrical connections” paragraph) and secure the panel to the wall with
the supplied screws.
Tighten the screw shown and hook the body onto the panel on the wall.

8
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
CH180-230V
2 - ELECTRICAL CONNECTION
ATTENTION!
Electrical connections must be made by qualified personnel.
ATTENTION!
Electrical connection operations must be done with the system’s power disconnected.
Electrical connections must be made referencing the following diagram.
Power supply
L-N 230V
Heat
pump
L N
230V~

CH180-230V
9
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
3 - QUICK PROGRAMMING GUIDE (PROG)
The first time any touch key is pressed has no effect, but only activates the functions of the buttons themselves and
lights up the display.
After 60 seconds of no interaction, the display goes back to the main screen.
= allows you to CONFIRM = allows you to PROGRAM
3.1 - DATE AND TIME SETTING
Note: pressing always allows you to go back to the previous page.
2s
PREMERE
PREMERE
ENTER
2
ENTER
PROG
PREMERE
PREMERE
PREMERE
1
3
12:01 01-01-18
23.0
SEL TEMP PROG DISP JOLLY OFF
OFF
1
DAY
PROGR UTENTE
DATA E ORA
INVERNO
PROFILO
VIS: ORARIO
BLOCCO NO
DATA E ORA
PROG
GIORNO 9
ENTER
MESE 11
ENTER
ANNO 2018
ENTER
ORE 12:0212:
ENTER
MIN
ENTER
12:02

CH180-230V
10
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
3.2 - WINTER/SUMMER SETTING
Note: pressing or allows you to move within the hours.
3.3 - HOURLY PROGRAMMING SETTING (PROFILE)
The profiles are set based on whether WINTER or SUMMER mode was previously selected.
2s
2
1
12:01 01-01-18
23.0
SEL TEMP PROG DISP JOLLY OFF
OFF
1
DAY
PROGR UTENTE
DATA E ORA
INVERNO
PROFILO
VIS: ORARIO
BLOCCO NO
DATA E ORA
PROG
PREMERE
x1
INVERNO
ENTER
INVERNO
ESTAT E
PREMERE
ENTER
2s
2
1
12:01 01-01-18
23.0
SEL TEMP PROG DISP JOLLY OFF
OFF
1
DAY
PROGR UTENTE
DATA E ORA
INVERNO
PROFILO
VIS: ORARIO
BLOCCO NO
DATA E ORA
PROG
PREMERE
x2
PROFILO
PROG
3
PREMERE
18.0
ENTER COPY
1
DAY

CH180-230V
11
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
Pressing or allows you to select the profile depending on the time.
SETTABLE PROFILES:
■tC (comfort) = SUMMER, WINTER
■tE (economy) = SUMMER, WINTER
■tA (antifreeze) = only for WINTER
■OFF = only for SUMMER
In winter tE < tC; in summer tC < tE.
Note:
■Pressing ENTER allows you to go to the next day.
■Pressing COPY allows you to copy the temperature profile being displayed to the following day.
■When you reach DAY H (HOLIDAY), pressing ENTER allows you to exit the sub-function.
418.0
ENTER COPY
1
DAY
18.0
COPYENTER
1
DAY 18.0
COPYENTER
2
DAY
18.0
COPYENTER
3
DAY 18.0
COPYENTER
4
DAY
18.0
COPYENTER
H
DAY

CH180-230V
12
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
3.4  SETTING THE DISPLAY
DISPLAYS:
■DISP:HOUR = displays the time on the main bar.
■DISP:INFO = displays information on the set operating mode.
2s
2
1
12:01 01-01-18
23.0
SEL TEMP PROG DISP JOLLY OFF
OFF
1
DAY
PROGR UTENTE
DATA E ORA
INVERNO
PROFILO
VIS: ORARIO
BLOCCO NO
DATA E ORA
PROG
PREMERE
x3
VIS: ORARIO
ENTER
VIS:ORARIO
VIS:INFO
PREMERE
ENTER
15:05 28-02-18
24.1
SEL TEMP PROG DISP JOLLY OFF
OFF
3
DAY
TA = OFF
24.1
SEL TEMP PROG DISP JOLLY OFF
OFF
3

CH180-230V
13
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
Note: selecting LOCK YES displays the PROG key. Then follow the procedure described in points 3 and 4.
3.5 - SETTING KEYBOARD LOCK WITH PASSWORD
When the keyboard is locked, you can only press the SEL key.
Pressing SEL allows you to enter the set password and unlock the keyboard.
2s
2
1
12:01 01-01-18
23.0
SEL TEMP PROG DISP JOLLY OFF
OFF
1
DAY
PROGR UTENTE
DATA E ORA
INVERNO
PROFILO
VIS: ORARIO
BLOCCO NO
DATA E ORA
PROG
PREMERE
x4
BLOCCO NO
ENTER
BLOCCO NO
BLOCCO SI
3
BLOCCO SI
PROG
ENTER
PASSWORD
00
1
4
PREMERE
ENTER
PASSWORD
1 0
1
PREMERE
ENTER
PASSWORD
11
1
PREMERE
ENTER
5
12:01 01-01-18
23.0
[ HOLIDAY ]
SEL
h
DAY

CH180-230V
14
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
4 - OPERATION (SEL)
The CH180-230V programmable thermostat is a device equipped with a temperature sensor, with an output relay on
board, which manages heating and/or air conditioning units.
The LCD display shows you how much energy the entire system consumes through an intuitive graph.
4.1 - OPERATING PROGRAMS
The programmable thermostat CH180WIFI has various operating modes called programs to manage heating/air
conditioning.
[ MAN ]
■MANUAL PROGRAM
The device regulates room temperature using a set temperature specified
on a case-by-case basis, for an unlimited amount of time until another
program is selected.
[ AUTO ]
■WEEKLY PROGRAM
The device manages the temperatures set based on the hourly programs
on a weekly profile. You can set the following temperature levels: tC, tE, tA/
OFF (every half hour).
[ JOLLY ]
■TEMPORARY PROGRAM
The device manages the system using a temperature that can be set over a
variable amount of time (you set the hour and the day up to when you wish
to keep the set temperature).
[ HOLIDAY ]
■HOLIDAY PROGRAM
The device manages the system through an extra daily profile (in the event
you stay home for a holiday).
You can set two temperature levels: tC, tE, tA,
OFF (every half hour).
■SYSTEM OFF or ANTIFREEZE PROGRAM
Press the OFF key to switch off the system. During WINTER mode, it
maintains the antifreeze temperature.
If you press the OFF key again in SYSTEM OFF mode, it goes back to the
previously set operating mode.
24.4
1
DAY
[ AUTO ]
SEL TEMP PROG DISP JOLLY OFF
12:01 01-01-18
23.0
[ JOLLY ]
SEL TEMP PROG DISP JOLLY OFF
1
DAY
24.4
h
DAY
[ HOLIDAY ]
SEL TEMP PROG DISP JOLLY OFF
TA = 5.0
23.0
SEL TEMP PROG DISP JOLLY OFF
.
OFF
TMAN = 25.0
23.0
[ MAN ]
SEL TEMP PROG DISP JOLLY OFF
.

CH180-230V
15
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
Note: you can select the program from: [MAN] - [AUTO] - [JOLLY] - [HOLIDAY].
Pressing the DISP key allows you to display certain parameters set according to the active operating program.
4.2 - SELECTING THE OPERATING PROGRAM
The programs are selected in cyclical order.
2
1
2s
TMAN = 25.0
23.0
[ MAN ]
SEL TEMP PROG DISP JOLLY OFF
.
TMAN = 25.0
23.0
SEL TEMP PROG DISP JOLLY OFF
.
[ MAN ]
PREMERE
SEL 24.4
3
DAY
SEL TEMP PROG DISP JOLLY OFF
[ AUTO ] 24.4
1
DAY
[ AUTO ]
SEL TEMP PROG DISP JOLLY OFF

CH180-230V
16
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
At the end of JOLLY mode, the programmable thermostat will return to the previously set operating status.
Set the time and day until you which you want to maintain the set temperature.
4.3 - “JOLLY” PROGRAM SETTING
Select JOLLY mode by following the procedure described in the “SELECTING THE OPERATING PROGRAM” paragraph or
by pressing JOLLY.
12:01 01-01-18
ENTER
JOLLY
2
1
12:01 01-01-18
ENTER
PREMERE
PREMERE
24.2
TJ = 20.0
ENTER
PREMERE
ENTER
2s

CH180-230V
17
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
4.4 - SETTING “AUTO” and “HOLIDAY” PROGRAM TEMPERATURE
You can set a tCOMF (comfort temperature) and tECO (economy temperature )temperature value between 2° and 40°C.
4.5 - SETTING “MANUAL” and “JOLLY” PROGRAM TEMPERATURE
You can set a TMAN and TJ temperature value between 2° and 40°C
24.4
TMAN = 25.0
ENTER
24.4
3
DAY
SEL TEMP PROG DISP JOLLY OFF
12:01 01-01-18
[ MAN ]
24.4
3
DAY
[ AUTO ]
SEL TEMP PROG DISP JOLLY OFF
12:01 01-01-18
1
224.4
TCOMF = 20.1
ENTER
PREMERE
24.4
TECO = 17.9
ENTER
PREMERE
ENTER
1
2
PREMERE
ENTER

CH180-230V
18
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
5 - PARAMETER DISPLAY (DISP)
Press the DISP key to view the most significant parameters cyclically.
5.1 - DATE AND TIME
5.2 - SEASON
12:01 01-01-18
24.2
SEL TEMP PROG DISP JOLLY OFF
3
DAY
[ AUTO ]
12:01 01-01-18
24.2
SEL TEMP PROG DISP JOLLY OFF
3
DAY
[ AUTO ]
1
2
12:01 01-01-18
ENTER
1
2
INVERNO
ENTER
PREMERE
x1
DATA E ORA
INVERNO
PROFILO
ORE UTILIZZO
12:01 01-01-18
ENTER
DATA E ORA
INVERNO
PROFILO
ORE UTILIZZO

CH180-230V
19
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
5.3 - PROFILE
Note: this section is only visible in [AUTO] and [HOLIDAY] mode; in [JOLLY], the display shows the end date and
time of the mode.
12:01 01-01-18
24.2
SEL TEMP PROG DISP JOLLY OFF
3
DAY
[ AUTO ]
1
2
PREMERE
x2
12:01 01-01-18
ENTER
DATA E ORA
INVERNO
PROFILO
ORE UTILIZZO
24.4
H
DAY
ENTER

CH180-230V
20
TOUCH-SCREEN PROGRAMMABLE THERMOSTAT
5.4 - HOURS OF USE
The programmable thermostat records the total consumption of the heating and cooling hours.
Note: it is possible to vary the use statistics by
■PREVIOUS DAY = total operating hours in the previous day
■CURRENT MONTH = total operating hours in the current month
■PREVIOUS MONTH =total operating hours in the previous month
■CURRENT YEAR = total operating hours in the current year
■TMAX = maximum room temperature measured the previous day
■TMIN = minimum room temperature measured from the previous day
■RESET
Pressing DISP on the CURRENT MONTH, PREVIOUS MONTH, and CURRENT YEAR screens displays a graph with
details on use (shown below).
display day or
month or year
hours of use
Press or to move and view the day of the month (or month or year,
depending on the page displayed) and hours of use.
Note: select RESET YES to reset the use statistics.
1
2
ORE UTILIZZO
ENTER
DISP
PREMERE
DISP
PREMERE
x4
GIORNO PRECED.
ENTER
024
003
ENTER
12:01 01-01-18
24.2
SEL TEMP PROG DISP JOLLY OFF
3
DAY
[ AUTO ]
12:01 01-01-18
ENTER
DATA E ORA
INVERNO
PROFILO
ORE UTILIZZO
RESET NO
ENTER
3
PREMERE
ENTER