Fantini Cosmi CH180RFWIFI User manual

CH180RFWIFI
WIRELESS TOUCHSCREEN
PROGRAMMABLE THERMOSTAT
WITH WIFI CONNECTION
INSTRUCTIONS FOR USE
FANTINI COSMI S.p.A.
Via dell’Osio, 6 20090 Caleppio di Settala, Milano - ITALY
Tel. [phone] | Fax [phone] | [e-mail]
www.fantinicosmi.it

2
WIRELESS TOUCHSCREEN PROGRAMMABLE THERMOSTAT WITH WIFI CONNECTION
CH180RFWIFI
Thank you for purchasing a FANTINI COSMI S.p.A. product.
Read this instructions manual carefully and always keep it handy for any consultation.
This documentation reflects the specific product features; however, due to regulatory or commercial
developments, customers are advised to check for the availability of updates to this documentation on the website
FANTINI COSMI S.p.A. : pdf.fantinicosmi.it
OPERATION
The CH180RFWIFI is a programmable thermostat with WiFi connection for direct control or control through APP
Intelliclima + for Smartphones and Tablets of the wireless multi-zone temperature control system.
It monitors the various zones in the home, communicating with the CH120RF room thermostats and the O60RF wireless
radiator actuators, with the CH175 boiler actuators or zone solenoid valve.
This system uses a program that allows you to set and edit as needed the temperature, humidity and time profiles for
each zone.
It is equipped with a room temperature and humidity sensor, also performing the function of a zone heating, cooling and
humidity control, commanding the O60RF and CH175 actuators.
It can also manage an auxiliary electrical device (for example an irrigation, ventilation, curtain, etc. system) with ON/OFF
control through an outside CH175.
It has an internal configurable relay and users can view the energy consumption of the entire system via the intuitive
graphics on its white backlit, positive LCD touchscreen.
CH180RFWIFI can communicate directly with 15 wireless devices (thermostats, actuators) and can manage up to 8 zones.
In total, the network can be connected to a maximum of 114 devices.
NOTE: wireless transmission toward other devices occurs maximum within 2 minutes.
MULTI-ZONE SYSTEM
The multi-zone system allows users to manage different temperature and humidity levels within the same home.
The values of each zone are set on the master CH180RFWIFI and modified locally by one or more devices installed inside
the rooms. Communication between all the devices occurs via radio waves.
Zona 4...8
Zona 2
Zona 1
Zona 3
CH180RFWIFI Master
O60RFCH120RF
CH175
O60RF
O60RF
O60RFCH120RF

3
WIRELESS TOUCHSCREEN PROGRAMMABLE THERMOSTAT WITH WIFI CONNECTION
CH180RFWIFI
DESCRIPTION OF DISPLAY KEYS
1 Day of the week
2 Activation status: heating, cooling or dehumidification
3 Bar graph for viewing messages and daily programming
4 Measured room temperature (Celsius/Fahrenheit)
5 Measured humidity
6 Multi-function touch icons
7 Zone
8 Operating mode
9 Various faults icon
The function of the multi-function keys varies depending on the situation and is described by the symbol which appears
on the display near the key itself.
The first press of any touch button allows you to activate the
functions of the buttons themselves and to light up the display.
Once powered, the “MASTER” CH180RFWIFI must be included in the Intellicomfort+ system wireless network. This
operation requires use of the configurator (code 1590880) which provides the operating instructions through its display.
When requested by the message on the display, you must move the tip of the configurator toward the point indicated on
the device to be configured to perform touch recognition.
For further details, please see the Intellicomfort+ system installation manual.
23.0
136
DAY
[ MAN ]
MODE DISP PROG ZONE OFF ESC
RH%
1
ZONE
[ JOLLY ]
[ HOLIDAY ]
[ AUTO ]
[ OFF ]
OK COPY
8
2
3
4
5
6
7
1
9
CH180RF
CH120RF
CH160RF CH120RF
1590880

4
WIRELESS TOUCHSCREEN PROGRAMMABLE THERMOSTAT WITH WIFI CONNECTION
CH180RFWIFI
TECHNICAL FEATURES
Temperature adjustment scale 2 - 40°C, increase 0.1°C
Measurement scale/room T display - 50 - + 50°C
Relative humidity adjustment scale 30 - 70%, increase 0.1°C
Measurement scale/room relative humidity display 0 - 100%, increase 1%
Power supply 230V 50 Hz
Type of output 1 relay with potential-free change-over contact (COM/NA/NC)
3 screw terminals (closed + open)
Relay contact range 5(3)A 250 Vca
Type of action 1BU (micro connection)
Software class A
Minimum adjusting differential 0.3 - 5 K
Thermal gradient of reference 4 K/h
Maximum room temperature 45°C
Storage temperature -10°C - +60°C
WIFI connection 2.4 GHz (802.11 b/g/n)
Router communication port 1080
Transmission and reception frequency 868 MHz
Maximum radio frequency power transmitted < 10 mW
Electric insulation Double insulation
Protection rating IP40
Pollution rating 2
Pulse voltage 4000V
Wall or recessed mounting
Dimensions 127 x 82 x 24 mm
Compliant with standards ■EN 60730-1 and second parts
■Directive 2014/53/EU (RED)
ErP classification
■ErP Class IV; 2%
[Reg. EU 811/2013 - 813/2013]
■Class VIII; 5% when used with O60RF actuators to
create three or more heating zones.
PACKAGE CONTENTS
■1 programmable thermostat
■2 screws for fixing on recessed mounting box 503 with American pipe thread 6/32UNC (approx. Ø 3.5mm)
■1 quick guide

5
WIRELESS TOUCHSCREEN PROGRAMMABLE THERMOSTAT WITH WIFI CONNECTION
CH180RFWIFI
Summary
OPERATION ..................................................................... 2
MULTI-ZONE SYSTEM...................................................... 2
DESCRIPTION OF DISPLAY KEYS .................................... 3
TECHNICAL FEATURES ................................................... 4
PACKAGE CONTENTS...................................................... 4
1 - INSTALLATION ........................................................... 6
2 - ELECTRICAL CONNECTION........................................ 8
3 - QUICK GUIDE FOR PROGRAMMING (PROG) ............... 9
3.1 - DATE AND TIME SETTING ....................................................9
3.2 - WINTER/SUMMER SETTING ..............................................10
3.3 - HOURLY PROGRAMMING SETTING (PROFILE)..................10
3.4 - AUX1 SETTING....................................................................12
3.5 - SETTING KEYBOARD LOCK WITH PASSWORD ..................12
4 - OPERATION (MODE) ................................................. 14
4.1 - OPERATING PROGRAMS ....................................................14
4.2 - SELECTING THE OPERATING PROGRAM...........................15
4.3 - SETTING “AUTO” PROGRAM ..............................................16
4.4 - SETTING GENERAL “JOLLY” PROGRAM ............................17
4.5 - SETTING ZONE “JOLLY” PROGRAM ...................................17
4.6 - SETTING “AUTO” and “HOLIDAY” PROGRAM
TEMPERATURE ...........................................................................18
4.7 - SETTING “MANUAL” and “JOLLY” PROGRAM TEMPERATURE ..18
5 - DISPLAYING PARAMETERS (DISP)........................... 19
5.1 - SEASON ..............................................................................19
5.2 - EXTERNAL PROBE .............................................................19
5.3 - HOURS OF USE...................................................................20
5.4 - WIFI STATUS .......................................................................21
5.6 - RSSI ....................................................................................22
5.5 - SERIAL NUMBER................................................................22
5.7 - FAULTS ...............................................................................23
6 - LOCK FOR SCREEN CLEANING (ESC) ...................... 23
7 - ADVANCED FUNCTIONS (PROG) .............................. 24
7.1 - DISPLAY ON TIME...............................................................24
7.2 - DISPLAY INTENSITY ...........................................................24
7.3 - DAYLIGHT SAVINGS TIME...................................................25
7.4 - ANTIFREEZE TEMPERATURE ............................................25
7.5 - RELATIVE HUMIDITY...........................................................26
7.6 - RELAY FUNCTION...............................................................26
7.7 - ZONE NAMES......................................................................27
7.8 - OFFSET ...............................................................................28
7.9 - DIFFERENTIAL MANAGEMENT..........................................28
7.10 - CELSIUS / FAHRENHEIT...................................................29
7.11 - LANGUAGE .......................................................................29
7.12 - EXTERNAL PROBE ...........................................................30
7.13 - COOL OFF .........................................................................31
7.14 - AUX1..................................................................................32
7.15 - ZONE DEU.........................................................................33
7.16 - WIFI...................................................................................34
7.17 - INFORMATION ..................................................................35
7.18 - RESETTING DEFAULT PARAMETERS...............................35
8 - REMOTE PROGRAMMING VIA APP........................... 36
8.1 - WIFI ACTIVATION ................................................................36
8.2 - INSTALLATION PROCEDURE .............................................37
8.3 - CONNECTION PROBLEMS .................................................38
9 - DISPOSAL................................................................. 39
10 - GENERAL WARRANTY CONDITIONS ..................... 39

mm mm
mm
6
WIRELESS TOUCHSCREEN PROGRAMMABLE THERMOSTAT WITH WIFI CONNECTION
CH180RFWIFI
1 - INSTALLATION
ATTENTION!
Installation must be carried out by qualified personnel in compliance with the requirements concerning
installation of electrical devices.
ATTENTION!
Make sure that the power supply is disconnected before performing installation.
The CH180RFWIFI programmable thermostat must be wall or recess mounted, with 3 modules or round box, at a height
of about 1.5 m from the floor, in a position suitable to correctly detect the room temperature.
1.5 m
OK
NO NO

LN 21 4
230V~
5(3)A 250v~
LN 21 4
230V~
5(3)A 250v~
LN 21 4
230V~
5(3)A 250v~
T45
LN 21 4
230V~
5(3)A 250v~
T45
2
1
3 4
5 6
87
7
WIRELESS TOUCHSCREEN PROGRAMMABLE THERMOSTAT WITH WIFI CONNECTION
CH180RFWIFI
Pry the back panel off the body by applying pressure to the specific groove at the bottom.
Remove the insulating protection by unscrewing the specific waterproof screw.
Make the electrical connections (refer to the “Electrical connections” paragraph) and secure the panel to the wall with
the supplied screws.
Tighten the screw shown and hook the body onto the panel on the wall.

8
WIRELESS TOUCHSCREEN PROGRAMMABLE THERMOSTAT WITH WIFI CONNECTION
CH180RFWIFI
2 - ELECTRICAL CONNECTION
ATTENTION!
Electrical connections must be made by qualified personnel.
ATTENTION!
Electrical connection operations must be done with the system’s power disconnected.
Electrical connections must be made referencing the following diagram.
Power supply L-N 230V
Thermoactuators
Heat pump
L N
230V~

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
9
CH180RFWIFI
3 - QUICK GUIDE FOR PROGRAMMING (PROG)
The first time any touch key is pressed has no effect, but only activates the functions of the buttons themselves and
lights up the display.
After 30 seconds of no interaction, the display goes back to the main screen.
= allows you to CONFIRM and
EXIT from the current screen = allows you to PROGRAM
3.1 - DATE AND TIME SETTING
Note: ESC always allows you to go back to the previous page.
2s
PRESS
PRESS
ESC
2
ESC PROG
PRESS
PRESS
PRESS
1
3
12:01 01-01-18
23.0
136
DAY
[ MAN ]
MODE DISP PROG ZONE OFF ESC
RH%
USER PROGR
DATE AND TIME
WINTER
PROFILE
AUX1: ON
LOCK NO
DATE AND TIME
OK
ESC
DAY 9
ESC
MONTH 11
ESC
YEAR 2018
ESC
HOUR 12:0212:
ESC
MIN
ESC
12:02

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
10
CH180RFWIFI
3.2 - WINTER/SUMMER SETTING
Note: pressing or allows you to move within the hours.
3.3 - HOURLY PROGRAMMING SETTING (PROFILE)
The profiles are set based on whether WINTER or SUMMER mode was previously selected.
2s
2
1
12:01 01-01-18
23.0
136
DAY
[ MAN ]
MODE DISP PROG ZONE OFF ESC
RH%
USER PROGR
DATE AND TIME
WINTER
PROFILE
AUX1: ON
LOCK NO
DATE AND TIME
OK
ESC
PRESS
x1
WINTER
ESC
WINTER
SUMMER
PRESS
ESC
2s
2
1
12:01 01-01-18
23.0
136
DAY
[ MAN ]
MODE DISP PROG ZONE OFF ESC
RH%
USER PROGR
DATE AND TIME
WINTER
PROFILE
AUX1: ON
LOCK NO
DATE AND TIME
OK
ESC
PRESS
x2
PROFILE
ESC
OK
PRESS
OK
3
PRESS
18.0
1
DAY
OK COPY
1
ZONE

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
11
CH180RFWIFI
Pressing or allows you to select the profile depending on the time.
SETTABLE PROFILES:
■tC (comfort) = SUMMER, WINTER
■tE (economy) = SUMMER, WINTER
■tA (antifreeze) = for WINTER only
■OFF = for SUMMER only
In winter tE < tC; in summer tC < tE.
Note:
■Pressing OK allows you to go to the next day.
■Pressing COPY allows you to copy the temperature profile being displayed to the following day.
■Pressing and holding OK allows you to go to the next zone.
■Once you have reached DAY H (HOLIDAY), pressing OK allows you to copy the profile of the whole
zone set to the next one.
418.0
1
DAY
OK COPY
1
ZONE
18.0
OK COPY
1
ZONE
1
DAY 18.0
OK COPY
1
ZONE
2
DAY
18.0
OK COPY
1
ZONE
3
DAY 18.0
OK COPY
1
ZONE
4
DAY
18.0
OK COPY
2
ZONE
H
DAY
ZN1 -> ZN2
OK COPY
ZN1 -> ZN3
OK COPY
ZN1 -> ZN2
OK COPY
ZN1 -> ZN3
OK COPY
PRESS
OK
3s

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
12
CH180RFWIFI
PRESS
ESC
Note: selecting LOCK YES displays the OK key. Then follow the procedure described in points 3 and 4.
3.4 - AUX1 SETTING
It is possible within the multi-zone system to autonomously manage an additional ON/OFF device (for example irrigation,
shutter darkening, outside lights, fan, air conditioner, etc. systems).
Yo u must have a CH175 connected to this device and it must be configured as an auxiliary AUX1 actuator.
3.5 - SETTING KEYBOARD LOCK WITH PASSWORD
Lets you lock the CH180RFWIFI keyboard and any CH120RF included in the network through a 3-digit numerical code. It
works only once, then it must be enabled again.
2s
2
1
12:01 01-01-18
23.0
136
DAY
[ MAN ]
MODE DISP PROG ZONE OFF ESC
RH%
USER PROGR
DATE AND TIME
WINTER
PROFILE
AUX1: ON
LOCK NO
DATE AND TIME
OK
ESC
PRESS
x3
AUX1: ON
ESC
AUX1: ON
AUX1: OFF
2s
2
1
12:01 01-01-18
23.0
136
DAY
[ MAN ]
MODE DISP PROG ZONE OFF ESC
RH%
USER PROGR
DATE AND TIME
WINTER
PROFILE
AUX1: ON
LOCK NO
DATE AND TIME
OK
ESC
PRESS
x4
LOCK NO
ESC
LOCK NO
LOCK
YES
Note: if the symbol !appears on the screen, it means that the command was set with the hourly profile and
therefore cannot be edited on this page. To edit it, follow the instructions in paragraph 7.

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
13
CH180RFWIFI
When the keyboard is locked, you can only press the OK key.
Pressing OK allows you to enter the set password and unlock the keyboard.
Note: with the KEYBOARD LOCK WITH PASSWORD function running, the CH120RF keys connected to the MASTER
CH180RFWIFI will also be locked.
A blackout does not reset the password.
3
LOCK YES
ESC
OK
ESC
OK
PASSWORD
00
1
4
PRESS
ESC
OK
PASSWORD
1 0
1
PRESS
ESC
OK
PASSWORD
11
1
PRESS
OK
5
12:01 01-01-18
23.0
136
DAY
[ MAN ]
OK
RH%

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
14
CH180RFWIFI
4 - OPERATION (MODE)
On CH180RFWIFI, it is possible to activate and display the main operating modes either for the whole system or for a
single zone.
To select a zone, exit from STAND-BY mode and press the ZONES key until the selected zone number is displayed.
To exit from the zone, press the ESC key, or else the CH180RFWIFI will go back to the main screen after 30 seconds.
MAIN SCREEN SINGLE ZONE SCREEN
Note:
■If the LOCAL SET message appears in a zone, it means that the set-point has been changed for a finite time for the
CH120RF of the indicated zone (see TEMPORARY MODIFICATION in the CH120RF manual).
■If WAIT appears in a zone, this means that no data relating to the selected zone has arrived after the creation of the
network.
■Any function set from the MAIN SCREEN affects the entire multi-zone system, while any function set in a SINGLE
ZONE only affects the related area.
4.1 - OPERATING PROGRAMS
The CH180RFWIFI programmable thermostat has different operating modes, called programs.
[ MAN ]
■MANUAL PROGRAM
The device regulates room temperature using a set temperature specified
on a case-by-case basis, for an unlimited amount of time until another
program is selected.
[ AUTO ]
■WEEKLY PROGRAM
The device manages the temperatures set based on the hourly programs
on a weekly profile. You can set the following temperature levels: tC, tE, tA/
OFF (every half hour).
[ JOLLY ]
■TEMPORARY PROGRAM
The device manages the system using a temperature that can be set over a
variable amount of time (you set the hour and the day up to when you wish
to keep the set temperature).
[ HOLIDAY ]
■HOLIDAY PROGRAM
The device manages the system through an extra daily profile (in the event
you stay home for a holiday).
You can set two temperature levels: tC, tE, tA,
OFF (every half hour).
12:01 01-01-18
23.0
136
DAY
[ AUTO ]
MODE DISP PROG ZONE OFF ESC
RH%
12:01 01-01-18
23.0
136
DAY
MODE DISP PROG ZONE OFF ESC
RH%2
ZONE
[ AUTO ]
12:01 01-01-18
23.0
136
DAY
[ MAN ]
MODE DISP PROG ZONE OFF ESC
RH%
12:01 01-01-18
23.0
136
DAY
[ AUTO ]
MODE DISP PROG ZONE OFF ESC
RH%
12:01 01-01-18
23.0
136
DAY
[ JOLLY ]
MODE DISP PROG ZONE OFF ESC
RH%
12:01 01-01-18
23.0
136
DAY
[ HOLIDAY ]
MODE DISP PROG ZONE OFF ESC
RH%

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
15
CH180RFWIFI
■SYSTEM OFF or ANTIFREEZE PROGRAM
Press the OFF key to switch off the system. The antifreeze temperature is maintained
during WINTER mode.
If the OFF key is pressed again in SYSTEM OFF mode, the system will return to the
previously set operating mode.
Note: press the MODE key to select from the [MAN] - [AUTO] - [JOLLY] - [HOLIDAY] operating modes in cyclical order.
If MODE is pressed from the main screen, all zones will be in the mode selected.
Pressing the DISP key allows the user to view some parameters set based on the active operating program.
4.2 - SELECTING THE OPERATING PROGRAM
The programs are selected in cyclical order.
Note: press ZONE and then press MODE to set the operating mode for every single associated zone.
The name of the operating mode is displayed in square brackets (e.g. [AUTO]).
12:01 01-01-18
23.0
136
DAY
MODE DISP PROG ZONE OFF ESC
RH%2
ZONE
[ AUTO ]
12:01 01-01-18
23.0
136
DAY
[ OFF ]
MODE DISP PROG ZONE OFF ESC
RH%
2
1
12:01 01-01-18
23.0
136
DAY
[ AUTO ]
MODE DISP PROG ZONE OFF ESC
RH%
12:01 01-01-18
23.0
136
DAY
MODE DISP PROG ZONE OFF ESC
RH%
[ MAN ] 2s
12:01 01-01-18
23.0
136
DAY
[ MAN ]
MODE DISP PROG ZONE OFF ESC
RH%
3
12:01 01-01-18
23.0
136
DAY
MODE DISP PROG ZONE OFF ESC
RH%
[ AUTO ]

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
16
CH180RFWIFI
4.3 - SETTING “AUTO” PROGRAM
The device manages the temperatures set based on the hourly programs
on a weekly profile. You can set the following temperature levels: tC, tE, tA/
OFF (every half hour).
The CH180RFWIFI has weekly pre-set profiles in both winter and summer,
but the user can edit them. See par. 3.3, page 10.
12:01 01-01-18
23.0
136
DAY
[ AUTO ]
MODE DISP PROG ZONE OFF ESC
RH%

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
17
CH180RFWIFI
At the end of JOLLY mode, the programmable thermostat will return to the previously set operating status.
Set the time and day until you which you want to maintain the set temperature.
4.4 - SETTING GENERAL “JOLLY” PROGRAM
The device manages the system using a temperature that can be set over a variable amount of time (you set the hour and
the day up to when you wish to keep the set temperature).
From the main screen, press MODE until JOLLY appears. The JOLLY TOT screen is displayed.
Press OK and use the and arrows to set the time (with 30 min. resolution) and the day until which you want to
maintain the set temperature.
4.5 - SETTING ZONE “JOLLY” PROGRAM
Press ZONE to select the desired zone and then press MODE until JOLLY appears. The JOLLY screen is displayed.
Press OK and use the and arrows to set the time (with 30 min. resolution) and the day until which you want to
maintain the set temperature.
Set the time and day until you which you want to maintain the set temperature.
12:01 01-01-18
ESC
JOLLY TOT
OK
ESC
2
1
12:01 01-01-18
ESC
PRESS
PRESS
24.2
TJ = 20.0
ESC
PRESS
ESC
PRESS
OK
JOLLY
OK
ESC
1
PRESS
OK
12:01 01-01-18
ESC
1
ZONE
2
12:01 01-01-18
ESC
1
ZONE
PRESS
PRESS
24.2
TJ = 20.0
ESC
PRESS
ESC

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
18
CH180RFWIFI
4.6 - SETTING “AUTO” and “HOLIDAY” PROGRAM TEMPERATURE
If the device is in AUTO or in HOLIDAY, you can set a tCOMF (comfort temperature) and tECO (economy temperature)
temperature value between 2° and 40°C.
4.7 - SETTING “MANUAL” and “JOLLY” PROGRAM TEMPERATURE
If the device is in MAN or in JOLLY, you can set a TMAN and TJ temperature value between 2° and 40°C.
Note: the same procedure applies to single zones.
Note: the same procedure applies to single zones.
(WINTER)
(SUMMER)
1
12:01 01-01-18
23.0
136
DAY
[ AUTO ]
MODE DISP PROG ZONE OFF ESC
RH%
224.4
TCOMF = 20.1
ESC
PRESS
24.4
TECO = 20.1
ESC
PRESS
ESC
1
12:01 01-01-18
23.0
136
DAY
[ MAN ]
MODE DISP PROG ZONE OFF ESC
RH%
224.4
TMAN = 20.1
ESC
PRESS
ESC
24.4
TECO = 20.1
ESC
24.4
TECO = 20.1
ESC
24.4
TCOMF = 20.1
ESC
24.4
TCOMF = 20.1
ESC

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
19
CH180RFWIFI
5 - DISPLAYING PARAMETERS (DISP)
Press the DISP key to view the most significant parameters cyclically.
5.1 - SEASON
5.2 - EXTERNAL PROBE
Note: “---” will be displayed if no external probe is present.
1
12:01 01-01-18
23.0
136
DAY
[ AUTO ]
MODE DISP PROG ZONE OFF ESC
RH%
224.4
TCOMF = 20.1
ESC
WINTER
ESC
PRESS
ESC
PRESS
x2
TCOMF
TECO
WINTER
EXT = ---
HOURS OF USE
WIFI STATUS
RSSI
SN 00000010
FAULTS
1
12:01 01-01-18
23.0
136
DAY
[ AUTO ]
MODE DISP PROG ZONE OFF ESC
RH%
224.4
TCOMF = 20.1
ESC
EXT = ---
ESC
PRESS
ESC
PRESS
x3
TCOMF
TECO
WINTER
EXT = ---
HOURS OF USE
WIFI STATUS
RSSI
SN 00000010
FAULTS

TOUCHSCREEN WIRELESS WEEKLY PROGRAMMABLE THERMOSTAT
20
CH180RFWIFI
5.3 - HOURS OF USE
The programmable thermostat records the total consumption of the heating and cooling hours.
Note: it is possible to vary the use statistics by
■PREVIOUS DAY = total operating hours on the previous day
■CURRENT MONTH = total operating hours in the current month
■PREVIOUS MONTH = total operating hours on the previous month
■CURRENT YEAR = total operating hours in the current year
■TMAX = maximum room temperature measured from the previous day
■TMIN = minimum room temperature measured from the previous day
■RESET
Press OK on the CURRENT MONTH, PREVIOUS MONTH and CURRENT YEAR screws to view a chart with the
details of use (shown below).
display day or
month or year
hours of use
Press or to move and view the day of the month (or month or year,
depending on the page displayed) and hours of use.
1
12:01 01-01-18
23.0
136
DAY
[ AUTO ]
MODE DISP PROG ZONE OFF ESC
RH%
224.4
TCOMF = 20.1
ESC
HOURS OF USE
ESC
OK
PRESS
OK
PRESS
x4
TCOMF
TECO
WINTER
EXT = ---
HOURS OF USE
WIFI STATUS
RSSI
SN 00000010
FAULTS
PREVIOUS DAY
ESC
024 01
ESC