Fasttel FT600(K)SIP(VC) User manual

Editie 2.7 pg1
Manual
FT600(K)SIP(VC)
Doo phone Ent y (+ keypad)
Fasttel reserves the right to change the content without prior warning.
Fasttel België, Klipsenst aat 18A, 9160 Loke en. Tel [phone] [e-mail]

Editie 2.7 pg2
Thank you for trusting our products!
Web page access:
-1 button model FT600S P(VC): press the call button for 5 seconds and you will hear the P address
through the speaker
- Model with keypad FT600KS P(VC): dial the code *3258* and you will hear the P address through
the speaker.
Or search for the device with the program “Advanced p scanner” (http://www.advanced-ip-
scanner.com) (or similar software). The mac address always starts with 00:2469300XXX.
Log in with admin / admin.
Always use account 2 to connect to you local sip se ve . Account 1 is used by the Fasttel cloud
when you use ou application fo sma tphone.
When opening the packaging you will find the following parts :
- FT600(K)S P(VC) Outdoor unit (optional with keypad).
- Bag with 4 x black Torx screws + bit + waterproof cover for the Lan connection + connectors
- User manual
Optional to order: see shop.fasttel.be
- FT600BS Desk stand for monitor
- FT600W 7”monitor
- FT600PSW Poe adapter for FT600W for on WiFi
- FT600WB FT600W Monitor wall bracket 30mm thick
- FT600L C smartphone license
- FT600HW Tool for hollow wall mounting
- FT600AZL Column small/large
- FTPOE2W Converter 2-wire to UTP cat 5
The FT600(K)S P(VC) outdoor unit comes with an in-wall or surface-mount housing.
Ensure that the housing will be mounted level.
The installation
1 - the FT600(K)VC Doo phone Ent y outdoo unit.
Height: 216 mm – Width: 116 mm |
Recess for flush model: 202 x 102 x 31 (HxWxD)
1.1 surface or flush mounted in brick wall
- First mount the housing in the right place on/in the wall. Because of the camera present,
we recommend 1.40 metres (55,1 inches) measured from the ground to the bottom of the
Doorphone Entry.

Editie 2.7 pg3
- Make sure the UTP cable for the network is present and also a cable (at least 2 cores hard
core) for your electric lock. f no UTP cable is present please order FTPOE2W to convert any cable to
UTP with PoE.
- Now first take the waterproof seal out of the packaging and insert the UTP cable and the
cable for the lock through the opening in the middle.
- Connect the cable to the door lock to NO+COM of relays A
- Close the cover and use the appropriate cable rubber (S-M-L) to seal the Doorphone Entry
watertight. Assemble with the 6 supplied screws.
- Now place the outdoor unit in the housing and mount it with the 4 supplied Torx screws.
1.2 installation in hollow wall:
f you wish to build the doorphone into a hollow wall (eg gyproc or gate style), then it is better to use
the FT600HW. This can be ordered separately. Only an opening of 202x102 is sufficient.
2– Sma tphone app’s (optional)
To order:
FT600LIC: 1 license
FT600LIC4: 3+1 free licenses

Editie 2.7 pg4
Go to your smartphone’s store/shop and download the app:
fasttelphone
After the download, you can scan the QR code (see left) and
your smartphone will be added to your installation.
The administrator of the system should take the 1st code as
this offers more rights: this way, only this user can determine
in the app the order in which the apps are called ( -> call
settings-> call preference-> sequence call).
Go to Account  basic and enter the details of your local sip
server in account 2. Do not change account 1! f you do not
use app licenses, account 1 may be used. Although it is
recommended to always use account 2 for local sip server,
because if you want to use our app later, account 1 will be
automatically overwritten.
f everything is correct, it will say “registered” at the top
Then choose ntercombasic. At “group call number (local)” you first enter the number that the
door phone should call on your local Sip server. n this example that is 100 so you fill in 100/2.
Then copy all numbers listed under “group call number (cloud)” upwards. n this example, these are
the 4 app licenses and 1 internal unit. The devices that you do not copy will also not be called.

Editie 2.7 pg5
3 – Keypad (optional)
Your Door phone Entry has a Keypad that can be used for access codes.
Browse to the P address of the door phone. f you do not know how to do this, enter the following
combination on the Doorphone *3258* and the speaker will read out the correct P address.
Open the web browser from the P address and log in with admin / admin. There is also a user/user
login with fewer rights.
n the left-hand column, select ntercom and then User.
You can see that 2 codes have already been pre-programmed. Change them o delete them.
Create new codes by right-clicking on "add".

Editie 2.7 pg6
User d is automatically incremented but you can edit it yourself.
Then give a logical name (e.g. children or gardener)
Then enter the code and choose the relay to be activated.
You must associate a time schedule with a code. By default, "always" is chosen. This code will
therefore always provide access.
New timetables can be created under ntercom  schedule.
On the door phone itself you enter code# to open the door.
The voice messages can be changed by changing the language of the web page:
Phone  time/language
f you have any questions call Fasttel Smart Doophones:
On the number 0902 00060 fo end use s (only f om inside Belgium)
On the number +(32) 9 2446520 (choice 2) fo installe s.
Keep the se ial numbe of you outdoo unit handy. You can find it on the back of the ent y panel
and it sta ts with FT600.