felton industries 3TGS9 User manual

WALL MOUNTED SPECTATOR SEATING
PRODUCT CODE (3TGS9)
PART No. PART NAME QTY
3TGW1 MAIN FRAME 4
3TGW2 FLAT BAR 3
3TGW3 4000mm.-SEATING PLANK 6
3TGW4 M10x35mm. CUP HEAD BOLT 12
3TGW5 M6x25 mm. HEX. HEAD BOLT 96
3TGW6 M6 LOCKNUT 96
3TGW7 M10 LOCKNUT 12
3TGW8 M10 PLAIN WASHER 12
[1]
WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE WALL MOUNTED SPECTATOR SEATING.
Make sure to wear protecve gloves and foot protecon when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This acvity requires two o more people as liing is involved. Please ensure bolts are only nger ghtened during the assembling
process for exibility in lining up components. Securely ghten the bolts before anchoring the product to the ground.
1
P1
[3TGW2]
[3TSW1] [3TGW3]
[3TGW6x4]
[3TGW1]
1
1
2
A. Have two external frames
[3TGW1] in place (STEP 1),
with lugs facing inwards
and secure them to the
back and front seang
planks [3TGW3] (STEP2),
by using hexagonal head
bolts [3TGW5] and lock-
nuts [3TGW76] -nger
ghten .
B. Install the central frames
[3TGW1] (STEP3), and
secure it to the seang
planks, by using hexagonal
head bolts [3TGW5] and
locknuts [3TGW76] -nger
ghten .
[3TGW5]
[3TSW6/7] [3TGW8]
[3TGW6x4]
A. Install the rest of the of the back
and front seang planks [3TGW3]
as illustrated (STEP 4). Secure the
seang planks [3TGW3] to the
frames, by using hexagonal head
bolts [3TGW5] and locknuts
[3TGW6] -nger ghten.
B. Repeat the previous process with
the two central seang planks
[3TGW3] as illustrated (STEP 5).
C. Install the central frame [3TGW1]
as shown (STEP5), and secure it
to the seang planks, by using
hexagonal head bolts [3TGW5]
and locknuts [3TGW6] -nger
ghten.
[3TGW5x4]
[3TGW1] [3TGW1]
[3TGW5x4]
2
4
[3TGW4]
[3TGW1]
2
4
[3TGW6x4]
[3TGW5x4]
3
5
[3TGW6x4]
[3TGW5x4]

[1]
WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE WALL MOUNTED SPECTATOR SEATING.
Make sure to wear protecve gloves and foot protecon when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This acvity requires two o more people as liing is involved. Please ensure bolts are only nger ghtened during the assembling
process for exibility in lining up components. Securely ghten the bolts before anchoring the product to the ground.
A. Tight the whole fasteners with a spanner and/or an appropriate tool. Adjust the whole unit as necessary.
B. Fix the spectator seating to the ground and the wall, by installing dyna -bolts on both, back and front frame lugs.
3
P2
[3TGW7x4]
4
A. Have the at bars [3TGW2] in place and secure it to the frames [3TGW1], by using cup head bolts [3TGW4], locknuts [3TGW7] and washers [3TGW8] -
nger ghten (STEP 6).
[3TGW1]
[3TGW8x4]
[3TGW4x4]
6
[3TGW1]
[3TGW1]