FENDT IDEAL Series User manual

Workshop Service Manual
IDEAL Series Combine
IDEAL 7
IDEAL 7PL
IDEAL 7T
IDEAL 8
IDEAL 8PL
IDEAL 8T
IDEAL 9
IDEAL 9PL
IDEAL 9T
Breganze
AGCO S.p.A. - Via F. Laverda, 15/17 - 36042
BREGANZE (VI) – Italy.
FENDT is a worldwide brand of AGCO
© AGCO 2019
June 2019
79037318C
English

Find manuals at https://best-manuals.com

TABLE OF CONTENT
General 1
Engine, fuel and exhaust system 2
Drive train system 3
Brake system 4
Axles 5
Hydraulic system 6
Electrical system 7
Cab 8
Air conditioning and heating system 9
Feeding system 10
Threshing system 11
Grain tank and elevator system 12
Discharge system 13
Fault codes 14
Diagrams 15
Index 16
.
Find manuals at https://best-manuals.com

1 General
1.1 General information .................................................... 1-5
1.1.1 Introduction to this service manual .......................................1-5
1.1.2 Units of measurement ................................................1-5
1.1.3 Table of contents ................................................... 1-5
1.1.4 Page numbers ......................................................1-5
1.1.5 Intended use ...................................................... 1-5
1.1.6 Proper disposal of waste .............................................. 1-5
1.1.7 Shield care ........................................................ 1-6
1.2 Machine identification .................................................. 1-7
1.2.1 Serial number plate .................................................. 1-7
1.2.2 Serial number plate - CE (safety plate) .................................... 1-8
1.2.3 Serial number plate - EAC ............................................. 1-8
1.2.4 Serial number description ............................................. 1-9
1.2.5 Terminal software information .......................................... 1-9
1.2.6 AP 9.8L engine plate ................................................ 1-10
1.2.6.1 Location of the engine serial number ........................... 1-10
1.2.6.2 Contents of the engine type plate ............................. 1-11
1.2.7 D26 / D38 engine plate .............................................. 1-11
1.2.7.1 Engine serial number ...................................... 1-11
1.2.8 Additional identification .............................................. 1-12
1.2.8.1 Homologation plate - CE/EAC ................................ 1-12
1.2.8.2 Homologation plate - France ................................. 1-12
1.2.8.3 Combine identification ..................................... 1-13
1.2.8.4 LS pump identification ..................................... 1-14
1.2.8.5 Propel motor identification .................................. 1-14
1.2.8.6 Ground drive transmission identification ........................ 1-14
1.2.8.7 Trailer hitch identification (if equipped) .......................... 1-15
1.3 Safety ................................................................ 1-16
1.3.1 Safety symbol ..................................................... 1-16
1.3.2 Warnings ........................................................ 1-16
1.3.3 Safety signs ...................................................... 1-17
1.3.4 A word to the technician ............................................. 1-17
1.3.5 The service manual ................................................. 1-18
1.3.6 Prepare for operation ................................................ 1-18
1.3.7 General information ................................................. 1-19
1.3.8 Emergency situations ............................................... 1-20
1.3.9 Personal protective equipment ......................................... 1-20
1.3.10 Emergency exit .................................................... 1-20
1.3.11 Seat instructions ................................................... 1-21
1.3.12 Operator out of seat ................................................ 1-21
1.3.13 Shield and guards .................................................. 1-21
1.3.14 Exhaust warning ................................................... 1-22
1.3.15 Flying debris ...................................................... 1-22
1.3.16 Handrails ........................................................ 1-23
1.3.17 Header safety ..................................................... 1-23
1.3.18 Grain tank safety ................................................... 1-23
1.3.19 Straw chopper, cha spreader, and straw spreader safety ..................... 1-24
1.3.20 Travel on public roads ............................................... 1-24
1.3.21 General maintenance information ....................................... 1-25
1.3.22 Fire prevention and first aid ........................................... 1-27
Table of contents
IDEAL Series Combine 1-1
79037318C
Find manuals at https://best-manuals.com

1.3.23 High pressure leaks .................................................1-28
1.3.24 Engine safety ..................................................... 1-28
1.3.25 Fuel safety ....................................................... 1-30
1.3.25.1 Ultra-low sulfur diesel ...................................... 1-30
1.3.26 Battery safety ..................................................... 1-31
1.3.27 Accumulator safety ................................................. 1-32
1.3.28 Replacement parts ................................................. 1-32
1.3.29 Proper disposal of waste ............................................. 1-32
1.3.30 Safety and informational signs ......................................... 1-33
1.3.30.1 Decal locations ...........................................1-33
1.3.30.2 Lubrication points, right side ................................. 1-35
1.3.30.3 Lubrication points, left side .................................. 1-36
1.3.30.4 Break Glass - Exit ......................................... 1-36
1.3.30.5 Lift point ............................................... 1-36
1.3.30.6 Tow point ............................................... 1-37
1.3.30.7 Danger - Entanglement hazard ............................... 1-37
1.3.30.8 Warning - Entanglement hazard ............................... 1-37
1.3.30.9 Tiedown point ........................................... 1-37
1.3.30.10 Power o delay .......................................... 1-38
1.3.30.11 Battery positive terminal .................................... 1-38
1.3.30.12 Battery disconnect ........................................ 1-38
1.3.30.13 Battery negative terminal ................................... 1-38
1.3.30.14 12V/120W .............................................. 1-39
1.3.30.15 Main fuses ..............................................1-39
1.3.30.16 Telescopic deck handrail .................................... 1-39
1.3.30.17 Unloader drive ........................................... 1-39
1.3.30.18 Safety alert - Fire extinguisher ................................ 1-40
1.3.30.19 Warning - Flying objects hazard ............................... 1-40
1.3.30.20 Warning - Explosion hazard .................................. 1-40
1.3.30.21 Burn hazard - radiator ...................................... 1-40
1.3.30.22 Burn hazard - hot surface ................................... 1-41
1.3.30.23 Impact hazard, coiled spring, variator ........................... 1-41
1.3.30.24 Jack point .............................................. 1-41
1.3.30.25 No step ................................................ 1-41
1.3.30.26 Lug nut torque, front wheels .................................1-42
1.3.30.27 Lug nut torque, rear wheels ................................. 1-42
1.3.30.28 Diesel exhaust fluid ....................................... 1-42
1.3.30.29 Ultra low sulfur diesel ...................................... 1-43
1.3.30.30 Warning - Hydraulic fluid pressure ............................. 1-43
1.3.30.31 Explosion hazard ......................................... 1-43
1.3.30.32 Warning - Crushing hazard .................................. 1-43
1.3.30.33 Warning - Crushing hazard .................................. 1-44
1.3.30.34 Flying objects hazard ...................................... 1-44
1.3.30.35 Crush hazard ............................................ 1-44
1.3.30.36 Fall hazard .............................................. 1-44
1.3.30.37 Warning - Shut o engine ................................... 1-45
1.3.30.38 Warning - Bystander alert ................................... 1-45
1.3.30.39 Operators manual .........................................1-45
1.3.30.40 Danger - Electrical hazard ................................... 1-45
1.3.30.41 Warning - Autoguide on public roads ........................... 1-46
1.3.30.42 Warning - Crush hazard ..................................... 1-46
1.3.30.43 Warning - Crush hazard ..................................... 1-46
1.3.30.44 Warning - Seat belt ........................................ 1-46
1.3.30.45 Reflector location ......................................... 1-47
1.3.30.46 Reflector yellow .......................................... 1-50
1.3.30.47 Reflector red ............................................ 1-50
1.3.30.48 Reflector orange ..........................................1-50
1.3.31 Emergency exit .................................................... 1-50
Table of contents
1-2 IDEAL Series Combine
79037318C
Find manuals at https://best-manuals.com

1.3.32 Seat belts ........................................................ 1-51
1.3.33 Fall protection rails ................................................. 1-51
1.3.34 Engage the feeder house cylinder stop ................................... 1-53
1.3.35 Disengage the feeder house cylinder stop ................................ 1-53
1.3.36 Shield tool ....................................................... 1-54
1.3.37 Leveling system ................................................... 1-54
1.3.38 Reverse alarm ..................................................... 1-55
1.3.39 Fire extinguisher ................................................... 1-55
1.3.40 Noise level in the cab ............................................... 1-55
1.3.41 Vibrations in the cab ................................................ 1-56
1.3.42 Electromagnetic emissions ........................................... 1-56
1.3.43 Statutory regulations ............................................... 1-57
1.4 Specifications ......................................................... 1-58
1.4.1 Dimensions ...................................................... 1-58
1.4.2 Mass (weight) ..................................................... 1-60
1.4.3 Tire specifications .................................................. 1-61
1.4.4 Engine specifications ................................................1-64
1.4.5 Lubrication specifications .............................................1-65
1.4.6 Machine system specifications ........................................ 1-68
1.4.7 Cab specifications .................................................. 1-70
1.4.8 Electrical specifications .............................................. 1-71
1.4.9 Machine lamp specifications .......................................... 1-71
1.4.10 Hydraulic system specifications ........................................ 1-72
1.4.11 Climate control specifications ..........................................1-73
1.4.12 Compressed air specifications ......................................... 1-73
1.4.13 Machine drive specifications .......................................... 1-73
1.4.14 Steering specifications ...............................................1-74
1.4.15 Brake specifications .................................................1-75
1.4.16 Wheel torque specifications ........................................... 1-75
Table of contents
IDEAL Series Combine 1-3
79037318C
Find manuals at https://best-manuals.com

Table of contents
1-4 IDEAL Series Combine
79037318C
Find manuals at https://best-manuals.com

1.1 General information
1.1.1 Introduction to this service manual
This service manual gives information from engineering tests, operating data, and the latest service
techniques at the time of publication. Read this service manual carefully before doing any service on the
machine.
The photos and illustrations used in this service manual were current at the time of publication. Production
changes can cause machines to vary from the photos and the illustrations. The manufacturer reserves the
right to redesign and change machines as necessary without notification.
WARNING:
Some pictures in this manual show the machine with shields or guards removed to permit
for a better view of the subject of the picture. All shields and guards must be in position
before operating the machine.
Machine movement when in normal use determines right-hand and left-hand.
1.1.2 Units of measurement
Measurements are given in metric units followed by the equivalent in US units. Hardware sizes are given in
millimeters for metric hardware and inches for US hardware.
1.1.3 Table of contents
This manual has a table of contents at the front. The table of contents shows the divisions. The individual
divisions also have a table of contents.
1.1.4 Page numbers
All pages have two numbers, such as 01-25. The first number shows the division. The second number
shows the page in the division.
Page numbers occur on the lower right-hand or lower left-hand corner of each page.
1.1.5 Intended use
This machine is designed solely for use in customary agricultural operations.
Do not use this machine for any application or purpose other than those described in this manual. The
manufacturer accepts no liability for damage or injury resulting from misuse of this machine.
Compliance with the conditions of operation, service and repair as specified by the manufacturer constitute
essential elements for the intended use of this machine.
This machine should be operated, serviced and repaired only by qualified persons familiar with its
characteristics and familiar with the relevant safety rules and procedures.
All generally recognized safety regulations and road trac regulations must be obeyed at all times.
Any unauthorized modifications performed on this machine will relieve the manufacturer of all liability for
any resulting damage or injury.
1.1.6 Proper disposal of waste
Improper disposal of waste can pollute the environment and ecology. A few examples of potentially
harmful equipment waste can include, but not limited to, items such as oil, fuel, coolant, brake fluid, filters,
battery chemicals, tires, etc.
Use leak proof containers when draining fluids. Do not use food or beverage containers to collect waste
fluids, as food or beverage container(s) may mislead someone into drinking from them.
[V]
GUID-D0FA2E94-0D28-42E9-A80B-6BB593BA9687 [V1]
GUID-EBB3FCAE-8712-43A9-BB65-1DB48189C57C [V2]
GUID-9BD2A110-651C-40FC-8D40-EDBAFD670A3C [V1]
GUID-6300C4A8-D25F-4B2F-BDC2-FAC58F99378B [V1]
GUID-939752D3-F912-4AFA-9CE0-FF5251AFAD3D [V3]
GUID-D27C9EFF-D3E3-4F5E-93ED-A6E5560C23DF [V3]
1. General
IDEAL Series Combine 1-5
79037318C
Find manuals at https://best-manuals.com

Do not pour or spill waste onto the ground, down a drain, or into any water source.
Air conditioning refrigerants escaping into the air can damage the Earth's atmosphere. Government
regulations may require a certified air conditioning service center to recover and recycle used air
conditioning refrigerants.
Inquire with local environmental or recycling center on the proper way to recycle or dispose waste.
1.1.7 Shield care
Clean the shields with water only, or a silicone remover if necessary.
IMPORTANT: Do not use a cleaner with alcohol in it. A cleaner that has alcohol can cause damage to the
shields.
To prevent scratching the shield surface follow these processes:
• Use a soft cloth.
• Whip in a smooth movement. Do not clean aggressively.
• Dry the surface with compressed air.
GUID-EB9E582A-8870-49E4-B59C-6A8EEE4878FD [V1]
1. General
1-6 IDEAL Series Combine
79037318C
Find manuals at https://best-manuals.com

1.2 Machine identification
Each machine is identified by a model and a serial number.
Record these numbers in the spaces given.
Give the model number and serial number to your dealer when parts or servicing are necessary.
Machine model number:
Machine serial number:
Date of delivery:
Dealer name:
Dealer address:
Dealer telephone number:
Dealer e-mail address:
Dealer fax number:
1.2.1 Serial number plate
Serial numbers identify the machine and are important if servicing or repair parts are necessary.
The machine serial number plate (1) is below the
cab on the right side.
1
HVJHE0110119301
Original art: /s/Creo Illustrate/Images/Josh/OPUS/1-18/serial number plate.svg
HVJHE0110119201
GUID-4A97FE30-7D29-4FE4-AC81-BD3F48656A70-low.svg [Low]
Fig. 1
GUID-0853B3F6-8A91-438A-9326-C54D60DEDBE0 [V5]
GUID-2DB508B9-ED3D-45EA-AC6D-4F2240C7A63D [V1]
1. General
IDEAL Series Combine 1-7
79037318C
Find manuals at https://best-manuals.com

1.2.2 Serial number plate - CE (safety plate)
Serial numbers identify the machine and are important if servicing or repair parts are necessary.
The machine serial number plate (1) is below the
cab on the right side.
1
Original art: /s/Creo Illustrate/Images/Josh/OPUS/1-18/New folder/homologation plate.svg
HVJHE0110161901
HVJHE0110161001
GUID-1239311B-E6FD-4CC2-B4F8-55BBA7D31079-low.svg [Low]
Fig. 2
1.2.3 Serial number plate - EAC
Serial numbers identify the machine and are important if servicing or repair parts are necessary.
GUID-903C1751-0A8D-4352-AF2F-E127380BEF1B [V1]
GUID-A6B64463-F4FF-44CC-A9C2-30D809DE1BC7 [V1]
1. General
1-8 IDEAL Series Combine
79037318C

The machine serial number plate (1) is below the
cab on the right side.
1
Original art: /s/Creo Illustrate/Images/Josh/OPUS/1-18/New folder/homologation plate.svg
HVJHE0110161901
HVJHE0110161101
GUID-1239311B-E6FD-4CC2-B4F8-55BBA7D31079-low.svg [Low]
Fig. 3
1.2.4 Serial number description
GUID-D069171B-A413-42F6-BDB6-2158A432B831-high.jpg [High]
Fig. 4
(1) Beginning symbol
(2) World manufacturer code
(3) Brand (G=AGCO)
(4) Machine description
(5) Check letter
(6) 0
(7) Plant code
(8) Progressive unit number
(9) End symbol
1.2.5 Terminal software information
The machine identification and terminal software information are on the maintenance screen.
Select the icons in this order:
GUID-DB9E8C59-9A7F-42B1-9AA1-0218F828E7F7 [V1]
GUID-B4619570-1106-41B3-A791-CA1B83270224 [V2]
1. General
IDEAL Series Combine 1-9
79037318C

The terminal information will change when the
terminal software is replaced.
The machine information will remain the same.
GUID-FE94A288-BB60-407D-8DBE-F6602413BEDE-high.jpg [High]
Fig. 5
(1) Vehicle
identification
number:
(2) EXT control
version:
(3) Terminal version:
1.2.6 AP 9.8L engine plate
1.2.6.1 Location of the engine serial number
The engine serial number is stamped on the cylinder block as the picture shows.
The serial number is also marked on the type plate.
Location of the engine serial number in:
• 84 engines
• 98 engines
KLD011001 KLD011001
66/74
84/98
66/74
66/74
GUID-97CD79BA-FB04-4739-8A05-42332E9157DE-low.svg [Low]
Fig. 6
Select to move to the previous screen.
[V]
GUID-671BFCE6-9620-48C4-9474-0781B9CA48F0 [V1]
1. General
1-10 IDEAL Series Combine
79037318C

84/98
GUID-CC7A5B8F-E206-4264-8AF9-A353C50DB913-low.svg [Low]
Fig. 7
1.2.6.2 Contents of the engine type plate
(1) Engine manufacturer
(2) Engine type
(3) Engine power and engine speed
(4) Serial number and manufacturing date
(dd.mm.yyyy)
(5) Valve clearance
156 kW 1900 rpm
THIS ENGINE IS SOLELY FOR EXPORT AND IS
THEREFORE EXEMPT UNDER 40 CFR 1068.230
FROM U.S. EMISSION STANDARDS AND
RELATED REQUIREMENTS.
EMISSION CONTROL INFORMATION
0,35 mm (cold/warm)
66 LFEN-A0.1234
Type
Serial nr
1
2
3
4
5
AGCO POWER INC.
Manufacturer
Power
Valve -
clearance
KLD011001
EM-EXP ENGINE NOT FOR USE IN EU NON-ROAD MOBILE MACHINERY
-01.01.2019
GUID-14721156-E6E2-42F2-9E31-3E1754B2059D-low.svg [Low]
Fig. 8 A general example plate
1.2.7 D26 / D38 engine plate
1.2.7.1 Engine serial number
The engine serial number is on the engine data
plate (1) located on the engine above the flywheel.
1
HVJHE0110113601
Original art: /s/Creo Illustrate/Images/Josh/OPUS/1-18/MAN engine label.svg
GUID-5A6E1E5F-6A45-4346-9B9A-5416D7C3502A-low.svg [Low]
Fig. 9
GUID-194684ED-B46F-481F-90CC-3EC548187239 [V2]
[V]
GUID-0A46E187-39D2-4E26-ADC1-6BD9BCBFC7D9 [V1]
1. General
IDEAL Series Combine 1-11
79037318C

1.2.8 Additional identification
1.2.8.1 Homologation plate - CE/EAC
The machine homologation plate (1) is below the cab on the right side.
The homologation plate shows the following
information:
• Vehicle type
• Approval number
• VIN (vehicle identification number)
• Total maximum permitted mass
• Max permitted mass on the axles
• Towing maximum admissible mass
GUID-8AAB90FD-3B02-4F4C-AE60-BCB6A0EF9916-high.jpg [High]
Fig. 10
1.2.8.2 Homologation plate - France
The machine homologation plate (1) is below the cab on the right side.
[V]
GUID-559E7C4E-8A05-4511-AFC8-BF393EA6C8E9 [V2]
GUID-2E8A0B84-7CCE-47BF-BEAC-8E51C7FD5CAF [V2]
1. General
1-12 IDEAL Series Combine
79037318C

The homologation plate shows the following
information:
• Vehicle type
• Approval number
• VIN (vehicle identification number)
• Total maximum permitted mass
• Mass (on the two axles)
• Towing mass
1
HVJHE0110161201
Original art: /s/Creo Illustrate/Images/Josh/OPUS/1-18/New folder/homologation plate.svg
HVJHE0110160801
GUID-88BBF122-BB87-4078-B0DB-2B96ECD43DD7-low.svg [Low]
Fig. 11
1.2.8.3 Combine identification
The machine type and VIN (vehicle identification
number)(1) show on the right rear side of the
frame near the rear axle.
GUID-1A575090-3399-45C4-903E-579FE0FCBED0-high.jpg [High]
Fig. 12
GUID-69F7340A-843C-4DF8-81B2-2887CB13EDF4 [V2]
1. General
IDEAL Series Combine 1-13
79037318C

1.2.8.4 LS pump identification
The identification plate (1) is on the front of the LS
pump.
GUID-4C3DDEEC-E6A8-4724-803F-B74527B647FE-high.jpg [High]
Fig. 13
1.2.8.5 Propel motor identification
The identification plate (1) is on the top part of the
propel motor.
1
HVJHE0110155701
Original art: /s/Creo Illustrate/Images/Josh/OPUS/1-18/New folder/701 plate.svg
GUID-D6BA93E1-D169-42FA-BC8B-906AB6BE26CA-low.svg [Low]
Fig. 14
1.2.8.6 Ground drive transmission identification
The identification plate (1) is on the front of the
ground drive transmission.
1
HVJHE0110155801
Original art: /s/Creo Illustrate/Images/Josh/OPUS/1-18/New folder/801 plate.svg
GUID-FDDD8436-BABE-4984-B66B-5120A98C1E11-low.svg [Low]
Fig. 15
GUID-DF7317EE-19E3-42C7-948D-9AE719573E97 [V1]
GUID-80BF1EAA-0D33-4A7D-AABE-610972BE3EB7 [V1]
GUID-1FB8AEB7-A5D5-4057-85CA-FEB658D5C209 [V1]
1. General
1-14 IDEAL Series Combine
79037318C

1.2.8.7 Trailer hitch identification (if equipped)
Rockinger trailer hitch
The identification plate (1) is located on the right-
hand side.
GUID-0A9F964F-BB88-4CAE-8279-CD924FACE100-high.jpg [High]
Fig. 16
CUNA trailer hitch
The identification plate (1) is located on the right-
hand side.
NOTE:
This type of hitch is only used in the Italian market.
GUID-2FE79144-45F7-4394-8E3D-B914BA0FB71E-high.jpg [High]
Fig. 17
GUID-E8FBD5E8-A6FB-4837-84C2-621079255940 [V1]
1. General
IDEAL Series Combine 1-15
79037318C

1.3 Safety
1.3.1 Safety symbol
The safety symbol tells you about a potentially
hazardous area!
Look for the safety symbol in this manual and on
the machine. The safety symbols tell you that
there is important safety instructions in the
manual.
GUID-4C201302-DBD2-4BFB-8D98-1DDED263BD6E-high.jpg [High]
Fig. 18
1.3.2 Warnings
Agricultural accidents can be prevented with your help.
All accident prevention depends on the full co-operation of the persons using or involved with service or
maintenance of the machine.
Most accidents can be avoided by observing simple safety rules.
The best safety system is one in which the operator observes all applicable regulations for machine safety
and maintenance.
Some of the illustrations contained in this manual were obtained by photographing combine models of the
same series, which may be dierently equipped. This means that apparent discrepancies may result
between your combine and those depicted in this manual.
DANGER: This symbol is used in this manual whenever your safety is involved.
Take the time to read and follow the instructions. Most importantly, be careful!
You can never be too prudent.
In order to provide a better view, certain photographs or illustrations in this manual may
show an assembly with the safety guards open or removed.
Fit and close all guards prior to machine operation.
Personal protection
Three types of warning signs appear in this manual and on the decals applied to the machine (Caution,
Warning and Danger) followed by specific instructions or decals with symbols clearly illustrating the type
of hazard.
These instructions involve your safety and the safety of people working nearby.
Pay particular attention to these warnings.
CAUTION: Indicates a potentially dangerous situation.
If not avoided, it may result in minor injuries.
WARNING: Indicates a potentially dangerous situation.
If not avoided, it may result in serious injuries.
[V]
GUID-5D9F270E-D748-4741-82B1-BE49B78685F2 [V5]
GUID-AA2BD2D2-05A1-4CE6-983E-021675B889C1 [V1]
1. General
1-16 IDEAL Series Combine
79037318C

DANGER: Indicates a potentially dangerous situation.
If not avoided, it may result in very serious injuries or even death.
Failure to follow the instructions related to the terms Caution, Warning and Danger may result in minor or
serious injuries or even death.
Machine safety
Other types of advice (Note, Important) are followed by special instructions referring to the safeguarding
of the machine.
NOTE:
Highlights and describes correct techniques or procedures to be adopted by the operator.
IMPORTANT:
Informs the operator that unless a special procedure is followed, damage, including serious damage, could
be caused to the machine.
1.3.3 Safety signs
WARNING:
Do not remove the safety signs. Replace safety signs that you cannot read, are damaged,
or are missing.
Clean the machine surface with a weak soap and water solution before you replace the safety signs.
Replacement safety signs are available from your dealer.
Always make sure that safety signs are in the correct locations and that you can read the safety signs.
Illustrations of safety sign locations are in this section.
Keep the safety signs clean. If necessary, use a weak soap and water solution.
1.3.4 A word to the technician
Read and understand the safety section in this
service manual before operating or servicing the
machine. Read and understand the safety sections
in the manuals for all attachments before operating
or servicing attachments. The technician has the
key to safety. Good safety practices protect
everyone.
Study the safety information in this service
manual. Make the safety information a working
part of the safety program. The safety information
in this service manual applies specifically to this
type of machine. Always do all other usual and
customary safe working precautions. Remember -
The technician has the responsibility for safety.
Good safety practices can prevent serious injury or
death.
The safety section points out some basic safety
situations that can occur during the operation and
maintenance of the machine. The safety section
also suggests possible ways to deal with these
situations. The safety section does not replace
safety practices in other parts of this service
manual.
Practice good safety to help prevent injury or
death.
GUID-AC91CCF6-1FF8-4A85-97A1-2D1562806825-high.jpg [High]
Fig. 19
GUID-2FB17168-6A01-47C5-B298-234AF171520B [V7]
GUID-3C35D58D-1F5D-4B85-A915-C7BB48F47262 [V1]
1. General
IDEAL Series Combine 1-17
79037318C