Fermax FVQ-6020APP User guide

1
2 WIRE SYSTEM
FVQ-6020APP KIT
&
FVQ-6020 KIT
VIDEO DOOR PHONE SYSTEM
FVQ-6016KP
FVQ-6013/9013WIFI
Please read the manual carefully before using the product.
Please note that images and sketches in this manual may be different from the actual products
INSTALLER MANUAL

2
Contents
Monitor Description...................................................................................................................................................... 3
Door Station Description............................................................................................................................................... 4
Addressing the monitors (When using more than one monitor): ................................................................................ 5
Impedance Switch......................................................................................................................................................... 5
Viewing Multiple Door Stations On The Monitor ......................................................................................................... 6
Wiring Diagrams............................................................................................................................................................ 7
Lock Wiring..................................................................................................................................................................16
Summary Keypad door station codes ......................................................................................................................... 23
Detailed Keypad Codes ...............................................................................................................................................24
Wi-Fi Configuration.....................................................................................................................................................27

3
Monitor Description
NO
Name
Description
1
Micro SD
Socket for Micro SD
2
Power Indicator
White LED when power on
3
Do Not Disturb
Purple LED when function is enabled
4
Message Indicator
Green LED when you have missed calls
5
Microphone
6
Screen
7 Inch Digital TFT LCD
7
Switch
Bit 1- Bit 5 – Home address
Bit 6 – Bit 7 – Master and slave selection
8
Connection Point
BUS1&BUS2 – System connection bus
24V & GND – External Power supply (Not needed)
COM & NO – Connector for external speaker
SW+ & SW- : Connector for external door bell
9
Speaker

4
Door Station Description
NO
Name
1
Status Indicator
2
Camera
3
Speaker
4
Keypad
5
LED’s (Sensor located in middle)
6
Microphone
7
Fixing screw
8
Connection Port

5
Addressing the monitors (When using more than one monitor):
This is controlled by dip switch 6 & 7 on the back of the monitor
Type
Dip Switch Setting
Master Monitor
Slave Monitor 1
Slave Monitor 2
Slave Monitor 3
Impedance Switch
Only turn to the on position when the monitor is the end of line. This is controlled by dip switch 8 on the back of
the monitor.
Type
Dip Switch Setting
Impedance Off
Impedance On
6 7
ON
6 7
ON
6 7
ON
67
ON
8
ON
8
ON

6
Viewing Multiple Door Stations On The Monitor
When using multiple door station you need to activate the door station to view on the monitors.
Using the settings menu on each individual monitor type in the following code depending how many door station
you have. (Default 4 Door Stations)
Door Station
Code (On)
Code (Off)
DS 1
0111
0110
DS 2
0131
0130
DS 3
0151
0150
DS 4
0171
0170

7
Wiring Diagrams
Notes:
When using more than 1 door station you require a 4 branch Door station module FVQ-6012D
When using more than 1 monitor in star configuration you require a 4 branch monitor module FVQ-6011M
Door Station is addressed as number 1 by default

8
1 Door Station to 4 Monitors (Star Configuration)

9

10
1 Door Station to 3 Monitors (Series)