Ferroli EU-OSK103 User manual

IT MANUALE UTENTE
EN USER MANUAL
ES MANUAL DE INSTRUCCIONES
RO MANUAL DE UTILIZARE
FR MANUEL DE L’UTILISATEUR
PL INSTRUKCJA OBSŁUGI
PT MANUAL DO UTILIZADOR
Climatizzatore per ambienti
Domestic air conditioner
Acondicionador de ambiente
Aparat de aer condiționat pentru locuință
Climatiseur d’ambiance
Klimatyzator
Aparelho de climatização do ar para ambientes

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
32
1. GENERALITY ........................................33
1.1 IMPORTANT NOTE ....................................33
1.2 DECLARATION OF CONFORMITY ........................33
1.3 SPECIFICATION ......................................33
1.4 PRECAUTION ........................................33
WIRELESS SAFETY STRATEGY ........................34
2. APPLICATION ........................................35
2.1 DOWNLOAD AND INSTALL APP..........................35
2.2 INSTALL THE SMART KIT (wireless module) ................36
2.3 USER REGISTRATION .................................36
2.4 NETWORK CONFIGURATION ...........................40
3. USING ANDROID DEVICE TO DO NETWORK CONFIGURATION 40
4. USING IOS DEVICE TO DO NETWORK CONFIGURATION . . . . 47
5. HOW TO USE APP ....................................53
6. SPECIAL FUNCTIONS .................................55
6.1 TIMER ON/TIMER OFF .................................55
6.2 8° C HEAT ...........................................56
6.3 SLEEP ..............................................56
6.4 CHECK ..............................................57
6.5 SHARE DEVICE.......................................58
7. CAUTIONS...........................................59
8. RED DECLARATION OF CONFORMITY ...................60

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
33
1. GENERALITY
1.1 IMPORTANT NOTE
Read the manual carefully before installing or connecting your Smart
kit(Wireless module). Make sure to save this manual for future reference.
1.2 DECLARATION OF CONFORMITY
Hereby, we declare that this Smart kit is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
A copy of the full DoC is attached. (European Union products only)
1.3 SPECIFICATION
Model: EU-OSK103
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna
Frequency : WLAN 2400~2483.5 MHz
Operation Temperature:0 C~45 C/32 F~113 F
Operation Humidity: 10%~85%
Power Input: DC 5V/300mA
Maximum Transmitted Power: 19.8dBm Max
1.4 PRECAUTION
Applicable system: iOS, Android.
(Suggest: iOS 8.0 or later, Android 4.0 or later)
-Please keep you APP up to date with the latest version.
-Due to special situation may be occurred, we explicitly claims below: Not
all of the Android and iOS system are compatible with APP. We will not be
responsible for any issue as a result of the incompatibility.

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
34
WIRELESS SAFETY STRATEGY
Smart kit only support WPA-PSK/WPA2-PSK encryption and none encryp-
tion .
WPA-PSK/WPA2-PSK encryption is recommended
Cautions:
• In some situations, the control process of the air conditioner via the
App may be subject to a time-out error. In such situations, it is possi-
ble that the display of the App and that of the air conditioner show dif-
ferent data. In such cases, try to repeat the operation or try restarting
the App and then perform the operation again. If the time-out error
persists, try re-installing the application
• Smart Phone camera needs to be 5 million pixels or above to make
sure scan QR code well.
• In some situations, time-out errors may occur. In such cases, try re-
peating the operation. If the time-out error persists, perform network
configuration again.
• The APP system is subject to update without prior notice for product
function improvement. The actual network configuration process may
be slightly different from the manual, the actual process shall prevail
• Please Check The Service Website For More information.

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
35
2. APPLICATION
2.1 DOWNLOAD AND INSTALL APP
CAUTION: The following QR Code is only available for downloading
APP. It is totally different with the QR code packed with SMART KIT.
To download the App, do one of the following:
• Scan the QR code "fig. 1 -", click the link to download the App for
your device
• Copy and paste the following URL into your browser, then click the
link to download the App for your device:
URL: https://www.ferroli.com/int/airconditionerapp
fig. 1 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
36
2.2 INSTALL THE SMART KIT (wireless module)
1. Remove the protective cap of the smart kit (wireless module)
2. Open the front panel and insert the smart kit (wireless module) into
the reserved interface.
3. Attach the QR code packed with Smart kit (wireless module) to the
side panel of the machine, ensure it is convenience to be scanned by
the mobile phone. Alternatively, user can take picture of the QR Code
and save it into their own phones.
fig. 2 -
WARNING
This interface is only compatible with SMART KIT(wireless module) provi-
ded by the manufacturer.
2.3 USER REGISTRATION
Note: please allow the App to access all requested services (position, ca-
mera…) to make sure the App works properly.
In case of first use of the App, the user needs to sign up.
Check that your device is connected to the WiFi router and that the WiFi
router is connected to the internet.

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
37
Open the app; choose “Sign Up” ("fig. 3 -"), then type your email address
and choose a password. Read and accept terms of service, then click “Re-
gister” ("fig. 4 -"). It is also possible to connect with third-party accounts.
fig. 3 - fig. 4 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
38
Check you email inbox and spam folders ("fig. 5 -"). Click (or copy paste
in your browser) the activation link that you will receive by email to confirm
you email address and activate your account ("fig. 6 -"). If you don’t recei-
ve any emails, try to sign up again and check that the email address you
provided is correct.
Note: the activation link has a limited time validity. If the link results expired
or invalid, please reset the password.
fig. 5 - fig. 6 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
39
Once the activation process is completed, open the App, type your email
address and password and click on “Login” ("fig. 7 -"). At this point you are
authenticated ("fig. 8 -").
fig. 7 - fig. 8 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
40
2.4 NETWORK CONFIGURATION
Cautions
• It is necessary to forget any other around network and make sure
the Android or iOS device just connect to the Wireless network you
want to configure.
• Make sure the Android or iOS device Wireless function works well
and can be connected back to your original Wireless network auto-
matically.
Kindly reminder:
User must finish all the steps in 8 minutes after powering on air conditioner,
otherwise you need to power on it again.
3. USING ANDROID DEVICE TO DO NETWORK CONFIGU-
RATION
1. Make sure your device has already been connected to the WiFi net-
work you intend to use. Delete saved WiFi networks other than the
one you want to configure.
2. Unplug the indoor unit of the air conditioner.
3. Power the indoor unit of the air conditioner. Using the remote control,
press the "LED" button 7 times within 10 seconds
4. The display of the indoor unit shows the text "AP". This means that
the wireless module of the air conditioner is in "Access Point" mode.
Some types of air conditioners do not need this procedure to enter
"AP" mode
5. Select "+ Add Device" and then "Split-type AC" ("fig. 9 -" and "fig.
10 -")

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
41
fig. 9 - fig. 10 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
42
6. Follow the instructions to start the wireless module in Access Point
mode ("fig. 11 -" and "fig. 12 -"). If the unit is already in AP mode,
click on next.
fig. 11 - fig. 12 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
43
7. Connect to the WiFi network generated by the wireless module ("fig.
13 -"). It is possible to connect in two different ways:
• By scanning the QR code on the sticker ("fig. 14 -")
• By manual data entry. In this case, click "Go to Wi-Fi settings", se-
arch for the "net_ac_XXXX" network and connect with the password
"12345678" ("fig. 15 -")
fig. 13 - fig. 14 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
44
8. Return to the App and select the home WiFi network you want to
connect the air conditioner to ("fig. 16 -") then click on "Start con-
figuration".
fig. 15 - fig. 16 -
Note: After connecting to the "net_ac_XXXX" network, your device may
alert that an internet connection is not available. Choose to remain con-
nected to the WiFi network anyway.

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
45
9. The App connects the wireless module to the selected home WiFi
network ("fig. 17 -"). It is possible to select a predefined or customized
name to identify the air conditioner ("fig. 18 -"), then the air conditioner
will be available in the list of connected systems ("fig. 19 -").
fig. 17 - fig. 18 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
46
fig. 19 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
47
4. USING IOS DEVICE TO DO NETWORK CONFIGURATION
1. Make sure your device has already been connected to the WiFi net-
work you intend to use. Delete saved WiFi networks other than the
one you want to configure.
2. Unplug the indoor unit of the air conditioner.
3. Power the indoor unit of the air conditioner. Using the remote control,
press the "LED" button 7 times within 10 seconds
4. The display of the indoor unit shows the text "AP". This means that
the wireless module of the air conditioner is in "Access Point" mode.
Some types of air conditioners do not need this procedure to enter
"AP" mode
5. Select "+ Add Device" and then "Split-type AC" ("fig. 20 -" and "fig.
21 -")
fig. 20 - fig. 21 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
48
6. Follow the instructions to start the wireless module in Access Point
mode ("fig. 22 -" and "fig. 23 -"). If the unit is already in AP mode,
click on next.
fig. 22 - fig. 23 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
49
7. Connect to the WiFi network generated by the wireless module ("fig.
24 -"). It is possible to connect in two different ways:
• By scanning the QR code on the sticker ("fig. 25 -")
• By manual data entry. In this case, click "Go to Wi-Fi settings", se-
arch for the "net_ac_XXXX" network and connect with the password
"12345678" ("fig. 26 -")
fig. 24 - fig. 25 -

EN
Cod. 3QE46170 - Rev. 00 - 11/2019
APP WIFI
50
8. Return to the App and select the home WiFi network you want to
connect the air conditioner to ("fig. 27 -") then click on "Start configu-
ration".
fig. 26 - fig. 27 -
Note: After connecting to the "net_ac_XXXX" network, your device may
alert that an internet connection is not available. Choose to remain con-
nected to the WiFi network anyway.