Fiberme FAP2601 User manual

FIBERME COMMUNICATIONS LLC
1749 Old Meadow Rd.
Suite 401 – McLean,
VA 22102, USA
www.berme.com
For Certication, Warranty and RMA information,
please visit www.berme.com
FAP2601 / FAP2601P
Quick Installation Guide
Essential IP Phone

Content
English...............................................................................1
简体中文..........................................................................6
Español............................................................................11
Français...........................................................................16
Deutsch............................................................................21
Italiano.............................................................................26
Русскй.............................................................................31
Português....................................................................... 36
Polski............................................................................. 41

~1~ ~2~
The FAP2601/FAP2601P is not pre-congured to
support or carry emergency calls to any type of hos-
pital, law enforcement agency, medical care unit
(“Emergency Service(s)”) or any other kind of Emer-
gency Service. You must make additional arrange-
ments to access Emergency Services. It is Your
responsibility to purchase SIP-compliant Internet
telephone service, properly congure the FAP2601/
FAP2601P to use that service, and periodically test
Your conguration to conrm that it works as You ex-
pect. If You don’t do so, it is Your responsibility to
purchase traditional wireless or landline telephone
services to access Emergency Services.
FIBERME DOES NOT PROVIDE CONNECTIONS
TO EMERGENCY SERVICES VIA THE FAP2601/
FAP2601P. NEITHER FIBERME NOR ITS OFFI-
CERS, EMPLOYEES OR AFFILIATES MAY BE
HELD LIABLE FOR ANY CLAIM, DAMAGE, OR
LOSS, AND YOU HEREBY WAIVE ANY AND ALL
SUCH CLAIMS OR CAUSES OF ACTION ARIS-
ING FROM OR RELATING TO YOUR INABILITY
TO USE THE FAP2601/FAP2601P TO CONTACT
EMERGENCY SERVICES, AND YOUR FAILURE
TO MAKE ADDITIONAL ARRANGEMENTS TO
ACCESS EMERGENCY SERVICES IN ACCOR-
DANCE WITH THE IMMEDIATELY PRECEDING
PARAGRAPH.
EN
Part of the FAP series of Carrier-Grade IP Phones, the FAP2601 is an
essential 2-line model designed with zero-touch provisioning for mass
deployment and easy management. It features a sleek design and a
suite of next-generation features including 3-way voice conferencing to
maximize productivity, EHS support for Plantronics & Jabra & Sennheiser
headsets and multi-language support. The FAP series includes carrier-
grade security features to provide enterprise-level security, including se-
cure boot, dual rmware images and encrypted data storage. For cloud
provisioning and centralized management, the FAP2601/FAP2601P is
supported by FIBERME’s Device Management System (GDMS), which
provides a centralized interface to congure, provision, manage and
monitor deployments of FIBERME endpoints. Built for the needs of desk-
top workers and designed for easy deployment by enterprises, service
providers and other high-volume markets, the FAP2601/FAP2601P of-
fers an easy-to-use and easy-to-deploy voice endpoint.
PACKAGE CONTENTS:
OVERVIEW:
WARNING: Please DO NOT power cycle the FAP2601/FAP2601P dur-
ing system boot up or rmware upgrade. You may corrupt rmware im-
ages and cause the unit to malfunction.
1x Phone Main Case 1x Handset
1x Phone Cord
1x Phone Stand
1x Quick Installation Guide
PRECAUTIONS:
WARNING: Use only the power adapter included in the FAP2601 pack-
age. Using an alternative non-qualied power adapter may possibly
damage the unit.
1x 5V Power adapter
(with FAP2601 only)
5V
1x Ethernet Cable

~3~ ~4~
PHONE SETUP:
Installing the phone (Wall Mount *sold separately):
1. Attach the wall mount spacers to the slot for wall mount spacers on the back
of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab from the handset cradle (See gure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the
handset while the phone is mounted on the wall (See gure below).
Tab with
extension up
Handset Rest
Tab with
extension down
Slot for the
wall mount
spacers and
phone stand
To setup the FAP2601/FAP2601P, follow the steps below:
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable.
3. Connect the 5V DC output plug to the power jack on the phone; plug the
power adapter into an electrical outlet. If PoE switch is used in step 3, this step
could be skipped (For FAP2601P).
4. The LCD will display FIBERME logo. Before continuing, please wait for the
date/time display to show up.
5. Using the phone embedded web server or keypad conguration menu, you
can further congure the phone using either a static IP or DHCP.
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom of the phone where there is a slot for the phone stand. (Upper half,
bottom part).
Installing the phone (Phone Stand):
PC Port
Headset Port
L A N P o r t
Handset Port
CONNECTING THE PHONE:
Wall mount
Wall mount
Phone Stand
PHONE DESCRIPTION:
Kensington Lock
Power
1. Ensure your phone is powered up and connected to the Internet.
2. Press the “UP” button to display the IP address.
3. Type the phone’s IP address in your PC browser.
4. Enter admin’s username and password to access the conguration menu.
(The factory default username is “admin” while the default random password
can be found on the sticker at the back of the unit).
PHONE CONFIGURATION:
Congure the FAP2601/FAP2601P using a Web Browser:
S o f t k e y s
Mute
Send/Redial
Standard keypad
H e a d s e t
MENU/OK key
T r a n s f e r Message
Navigation keys
Speaker
Volume
Message Waiting
Indicator

~5~ ~6~
1. Make sure the phone is idle.
2. Press the MENU key to access the keypad MENU to congure the phone.
3. Select MENU → Settings → Account settings to congure settings for SIP
Proxy, Outbound Proxy, SIP User ID, SIP Auth ID and SIP Password.
4. Follow MENU options to congure the basic features of the phone. For ex-
ample: the IP address if using a static IP. For details, please check FAP260X
series User Manual.
5. Please contact your ITSP for additional settings that may be necessary to
congure the phone.
Congure the FAP2601/FAP2601P using the Keypad:
Refer to online documents and FAQ for more detailed information:
https://www.berme.com/products/
The GNU GPL license terms are incorporated into the device rmware and
can be accessed via the Web user interface of the device at
http(s)://IP/gpl_license.
To obtain a CD with GPL source code information please submit a written
request to info@berme.com
FAP2601/FAP2601P不预设对医院，执法机构，医
疗中心(急救服务)以及各种紧急服务的紧急通话
服务。用户必须自行设定紧急通话功能。用户必
须自行购买SIP兼容的网络电话服务，正确地设定
FAP2601/FAP2601P使用该服务，并定期测试您的配
置以确保FAP2601/FAP2601P 如预期工作，否则请
购买传统无线或有线电话服务来拨打紧急通话。
FIBERME 公司的 FAP2601/FAP2601P不支持紧急通
话服务。FIBERME Networks 公司、其管理者和员
工以及其相关机构对此所造成的任何索赔、损失或
者损害都不负有任何法律追究责任。在此，您将无
权对任何以及所有由于无法通过FAP2601/FAP2601P
拨打紧急电话以及没有遵照前 段文字描述而造成紧
急通话失败的事件提出诉讼。
ZH