Fike FIK-RA1000R Technical manual

PN LS10258-001FK-E:A 03/04/2021 ECN: 151526
FIK-RA1000R Remote Annunciator
Product Installation Document
FIKE CORPORATION
704 SW 10th Street
Blue Springs, MO 64015
www.fike.com
1 Description
The FIK-RA1000R (red) is an optional (4x20) LED remote annunciator as shown in Figure 1. The FIK-RA1000R can be surface or flush-
mounted.
Figure 1 Model FIK-RA1000R Remote Annunciator
1.1 Compatibility
The RA-1000 is used with compatible FACPs. See the FACP Installation Manual for more information.
1.2 Specifications
:
2 Mounting
The annunciator can be flush- or surface-mounted. Figure 2 shows the annunciator dimensions.
Figure 2 Annunciator Dimensions
Parameter Value
Operating Voltage: 24VDC
Current: Standby: 25mA
Alarm: 50mA
Operating Temperature: 0° to 49° C (32° to 120° F)
8-1/8”
6-7/16”
1-1/4” 9-1/8”
7-3/8”
1-1/4”
1-9/16”
Annunciator Backbox Bezel (escutcheon plate)
Side View

2 FIK-RA1000R Product Installation Instructions — P/N LS10258-001FK-E:A 03/04/2021
2.1 Flush Mounting
This Section of the document describes flush mounting. In Figure 3, follow these steps to flush-mount the FIK-RA1000R.
\
Figure 3 Flush-Mounting
2.2 Surface Mounting
Figure 4 shows surface mounting.
Figure 4 Surface Mounting
2.3 Installation
The FIK-RA1000R installation involves the following steps:
1. Ensure the power is turned off at the panel.
2. Mount the FIK-RA1000R in the desired location.
3. Connect the FIK-RA1000R to the panel. (See Figure 5).
4. Use the DIP switches on the back of the FIK-RA1000R to assign an ID number.
5. Add the FIK-RA1000R module to the System through programming. JumpStart® will automatically add the module. Refer to the FACP
manual for more information.
Securing the Back box to the Wall for Flush-Mounting
Attach a second set of wires to the top of the backbox.
Secure the wires behind the screw.
Insert the wires at an angle into the first holes past the sheet rock.
Flush-Mounting with the Electrical Box (Example)
When flush-mounting with an electrical
box, the box must be 1 1/4” min.from the
face of the wall.
Electrical box
Annunciator backbox
Sheet rock

FIK-RA1000R Product Installation Instructions — P/N LS10258-001FK-E:A 03/04/2021 3
3 Wiring Connections
Wire the FIK-RA1000R to the FACP as Shown in Figure 5.
Figure 5 SBUS Connection
supervised
power-limited