Fisher & Paykel OR120DDWGFX2 User manual

Oven controls and setting the clock
Buttons Description
sets the timer
sets the cooking time for automatic cooking
sets the stop time for automatic cooking
sets the clock, returns oven to manual mode, cancels automatic cooking
decreases time and beep volume
increases time
Fig. 27 Clock Display and control buttons
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Dual_Fuel/OR120DDWGFX2/User_Guide_OR120DDW…
Updated: Mon, 16 Mar 2020 14:48:37 GMT
Powered by
1

Illuminated symbols
If the display shows It means that... For more information
AUTO
flashing
with The clock needs to be set. See instructions
below.
steadily lit The oven is set for automatic cooking.
See section ‘Automatic
cooking’
flashing and
beeping Automatic cooking has finished or has been set incorrectly
(the stop time is before the time of day).
steadily lit The timer is set.
See section ‘Using the
electronic timer’
flashing and
beeping The set time is up.
To set the clock
When the power to the oven is turned on or restored after a power failure,
and AUTO will flash in the display.
1. Press
.
2. Press
and
until you have the correct time of day.
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Dual_Fuel/OR120DDWGFX2/User_Guide_OR120DDW…
Updated: Mon, 16 Mar 2020 14:48:37 GMT
Powered by
2

Oven controls
1. Select the function using the function knob. The oven lights will come on.
2. Select the temperature using the temperature control knob. The oven
temperature indicator light, above the temperature knob on the control
panel, will glow until the oven has reached the set temperature, and then it
will go out.
3. When you have finished cooking, turn the function and temperature control
knobs to the off
position.
Press the
button if AUTO is flashing or steadily illuminated.
Fig. 28 Function knob
Fig. 29 Temperature knob
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Dual_Fuel/OR120DDWGFX2/User_Guide_OR120DDW…
Updated: Mon, 16 Mar 2020 14:48:37 GMT
Powered by
3