Fisher & Paykel CE365DBX1 Parts list manual

1.888.96.7872
Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.fisherpaykel.com
DIMENSIONS INCHES (MM)
CE365DBX1
A Overall width of cooktop 5⁄” (900)
B Overall depth of cooktop 20⅞” (50)
C Height of chassis below top of counter (including height of conduit junction) 4¼” (108)
D Width of chassis 4⅛” (866)
E Depth of chassis (including spacers) 19⅝” (498)
36 INCH ELECTRIC CERAMIC COOKTOP DIMENSIONS
CE65DBX1
A
B
C
D
E

1.888.96.7872
Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.fisherpaykel.com
DIMENSIONS INCHES (MM)
CE365DBX1
A Overall depth of cutout 20⁄”(510)
B Thickness of countertop* (to enable the cooktop to be fastened with the supplied clamps) min. 1⁄”(0)
* If the countertop is thicker than 1 9⁄16” (40mm), recess its underside to within
the thickness range ‘H’. max. 1⁄”(40)
C Overall width of cutout 4¼” (870)
D Min. clearance from side edges of cutout to: nearest combustible surface 2⁄” (65)
E Min. clearance from countertop to: overhead cabinet not directly above the cooktop 18” (457)
F Min. distance between cabinets either side of the cooktop 6” (915)
G Maximum depth of overhead cabinetry 1” (0)
H Min. clearance from rear edge of cutout to: nearest combustible surface 2⁄”(55)
I Min. clearance from glass surface to:
overhead cabinet centered above the cooktop (unprotected)*
overhead cabinet centered above the cooktop (protected)*
0” (762)
24” (610)
J Min. distance from front edge of cutout to: front edge of counter 1” (25)
K Min. clearance below top of countertop to:
top of oven installed below cooktop (IMPORTANT see Fig.1 and Note #1 following)
top of drawer or other obstruction below cooktop (see Fig.2)
4½” (115)
4½” (115)
L Min. clearance below top of countertop to junction box 9” (20)
M Maximum distance from center rear of cutout to center of junction box** 0” (762)
Note #1 Only the oven models indicated in Fig.1 below may be installed below the cooktop.
CUTOUT, CLEARANCE AND CABINETRY DIMENSIONS
CE65DBX1
(500 x 10 mm) (500 x 10 mm)
OB30S
Clearance and cabinetry dimensions
H
I
D
D
KL
M
G
E
F
A
C
B
Top of drawer or
other obstruction
KK
Fig. 1 Minimum clearances and ventilation
requirements - oven installed below cooktop
(Fisher & Paykel)
WOSU-30
(DCS by Fisher & Paykel)
Fig. 2 Minimum clearances and ventilation
requirements - drawer or other obstruction below
J