Fisher-Price GeoTrax W6116 User manual

www.fisher-price.com
W6116
W6116
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly required.
Requires seven "AAA" batteries (one battery included) for operation.
Tool required: Phillips screwdriver (not included).
Vehicles shown in photographs and illustrations
may be different than the vehicles included with your toy.

2
Assembled Parts
CAUTION
This product includes small
parts in an unassembled state.
Adult assembly is required.
2 Upper Ramps
6 Curved Tracks 2 Long Tracks 2 Short Tracks
2 Lower Ramps
Tower 3 Guardrails Easy Load Track
BaseRoof
#4 x ½" (1,3 cm) Screw - 4
SHOWN ACTUAL SIZE
ELdTk

3
Battery Installation
Remote Controller
• Locate the battery compartment on the bottom of the
remote controller.
• Loosen the screw in the battery compartment door
with a Phillips screwdriver. Remove the battery
compartment door and insert three “AAA” (LR03)
alkaline batteries.
•
Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.
• If this remote controller begins to operate erratically,
you may need to reset the electronics. Remove the
batteries and reinstall.
We recommend the use of alkaline batteries for longer battery life.
IMPORTANT! Under normal use conditions, the batteries in the vehicle will require
replacement more often than the batteries in the remote controller. For additional
information, refer to the troubleshooting section on the last page of this sheet.
RC Vehicle
• Loosen the screws in the bottom of the vehicle with
a Phillips screwdriver. Lift the top of the vehicle off
of the chassis to access the battery compartment.
• Insert three “AAA” (LR03) alkaline batteries.
•
Replace the top of the vehicle and tighten the screws
with a Phillips screwdriver. Do not over-tighten.
• If the vehicle begins to operate erratically, you may
need to reset the electronics. Remove the batteries
and reinstall.
Talking Vehicle
For best performance, we recommend replacing the
battery that came with Finn McMissile with a new
"AAA" (LR03) alkaline battery.
• Loosen the screws in the bottom of Finn McMissile
with a Phillips screwdriver. Remove the bottom
of the vehicle.
• Remove the exhausted battery and throw it away.
• Insert a new "AAA" (LR03) alkaline battery.
• Replace the bottom of the vehicle and tighten
the screws. Do not over-tighten.
• If the vehicle begins to operate erratically, you may need
to reset the electronics. Remove the battery and reinstall.
• When sounds from this vehicle become faint or stop,
it’s time for an adult to change the battery.
d

4
Assembly
• Fit the tabs on the tower into the slots in the
base. Push to "snap" the tower in place.
• Fit the tabs on the upper ramp into the slots
in the lower ramp.
• Insert two screws into the upper ramp.
Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• Repeat this procedure to assemble the other
upper and lower ramps.
Base
Upper Ramp
Lower Ramp
Tower
Roof
1
3
4
• Fit a ramp onto each side of the tower.
• Fit the tabs on the roof into the slots on the
tower. Push to "snap" the roof in place.
3
2

5
Ramp
Curved Track
Curved Track
Tower Assembly
2 Long Tracks
Short Track
Curved Track
Short Track
Ramp
Assembly
• Fit the guardrail onto a curved track,
as shown.
5
• Track pieces easily snap together.
6
Track Layout
Easy Load Track
Curved Track
with Guardrail
Curved Track
with Guardrail
Curved Track
with Guardrail

6
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2011 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc., unless otherwise indicated.
©Disney/Pixar
PRINTED IN CHINA W6116pr-0920
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible
for compliance could void the user’s authority to operate the equipment. This device complies
with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received, including interference
that may cause undesired operation.
CO
N
S
UMER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

7
Let's Go!
Hint: We do not recommend using Lightning McQueen on carpets. For best performance, use
on hard, flat surfaces.
• Point the antenna of the remote controller
toward the vehicle and push the stick
forward. The vehicle moves forward.
• Pull the stick all the way back and the
vehicle travels in reverse. Release the stick
to stop.
1
2
3
FORWARD
STOP
REVERSE
1
2
3
2
3
1
• Press the power button on top of the
vehicle. The ready light turns on.
POWER BUTTON
READY LIGHT

8
Recreate the Excitement!
• Press the button on the side of the tower to
lock the upper floor.
• Place Finn McMissile on the upper floor in
the direction shown.
• Push down on Finn McMissile to hear
fun sounds! • Drive Lightning McQueen in the opposite
direction through the tower. Watch the
floor drop the vehicle on the ramp for
a quick escape!
1
2
3

9
Troubleshooting
PROBLEM SOLUTION
Lightning McQueen
drives slowly
Battery power in the vehicle may be weak. Replace all three
batteries in the vehicle with new, alkaline batteries.
The wheels on the vehicle may be dirty. Wipe them with
a clean cloth.
Lightning McQueen
does not respond to
the remote controller
Battery power in the remote controller may be weak. Replace all
three batteries in the remote controller with new, alkaline batteries.
You may be beyond the maximum range of the remote controller
which is about 12 feet (3,7m).
You may not have a clear path between the remote controller
and the vehicle. This toy works best when there are no
obstructions between the vehicle and the remote controller.
Bright sunlight or fluorescent lights may affect the range of the
remote controller. Try dimming the room you are playing in.
The vehicle may have shut off. If you do not operate the remote
controller for a few minutes, the vehicle shuts off automatically
and the ready light turns off. Press the power button on the
vehicle, and operate the remote controller to restart.
Sounds from Finn
McMissle become faint
or stop
Battery power in the vehicle may be weak. Replace battery in the
vehicle with a new, alkaline battery.

10
Consumer Information
ICES-003
• This Class B digital apparatus complies with
Canadian ICES-003.
• Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NMB-003
• Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
• L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage
et (2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement
du dispositif.
Care
• Wipe the toy with a clean, damp cloth.
Do not immerse.
• This toy has no consumer serviceable parts.
Do not take this toy apart.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
Battery Safety Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the toy. Dispose of batteries safely.
Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy
before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 7
"AAA" (LR03)