Fisher-Price N7322 User manual

N7322
fisher-price.com
Please keep this instruction sheet for future reference,
as it contains important information.
Requires two "AA" batteries (included) for operation.
Batteries included are for demonstration purposes only.
Adult assembly is required for battery replacement.
Tool required for battery replacement: Phillips screwdriver (not included).
Wipe the toy with a clean cloth dampened with a mild soap
and water solution. Do not immerse this toy.
This toy has no consumer serviceable parts. Do not take this toy apart.

Battery
Replacement
Battery Safety
Information
1,5V x 2
"AA" (LR6)
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the product.
Dispose of batteries safely. Do not
dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery
terminals.
• Use only batteries of the same or
equivalent type as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
For best performance, we recommend
replacing the batteries that came with
this toy with two, new alkaline “AA”
(LR6) batteries.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
Remove the exhausted batteries and
dispose properly.
• Insert two, new “AA” (LR6)
alkaline batteries.
•
Replace the battery compartment door
and tighten the screw. Do not
over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power/volume switch off and
then back on.
• When sounds from this toy become
faint or stop, it’s time for an adult to
change the batteries.
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC).
Check your local authority
for recycling advice
and facilities.

3 Modes of Fun!
• Slide the power/volume switch on the bottom of the toy to ON with low
volume or ON with high volume .
• Slide the mode switch to:
Learning - Turn the page to hear the name of the animal and the sound it
makes, press a button on the telephone to hear the number and a tune.
Music - Turn the page to hear a song, press a button to hear the next part
of the song.
Imagination -Turn the page to hear animal sounds, press a button for real
phone sounds and phrases.
• When finished playing with this toy, slide the power/volume switch OFF .
Power/Volume
Switch
Mode Switch

Consumer Information
CO
N
SU
MER A
SS
I
S
TAN
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications
not expressly approved by the
manufacturer responsible for
compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
©2012 Mattel. All Rights Reserved.
PRINTED IN CHINA N7322b-0920
ICES-003
This Class B digital apparatus complies
with Canadian ICES-003. Operation is
subject to the following two conditions:
(1) this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada. L’utilisation de ce dispositif
est autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.