Fisher-Price P7680 User manual

1
Please keep this instruction sheet for future reference, as it contains important information.
This product emits flashing lights at 5-30 cycles per second.
Requires three "AA" (LR6) alkaline batteries (not included) for operation.
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
www.fisher-price.com
P7680

2
Care
• Wipe this toy with a clean cloth dampened with a mild soap
and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take this
toy apart.
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
ICES-003
• This Class B digital apparatus complies with Canadian ICES-003.
• Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
NMB-003
• Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
• L’utilisation de ce dispositif est autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire de brouillage et (2) l’utilisateur
du dispositif doit être prêt à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif.
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Consumer Information
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. P7680a-0920
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN MEXICO

3
Assembled Parts
#8 x ¾” Screw – 23
Tighten or loosen all screws
with a Phillips screwdriver.
Do not over-tighten.
Gate
Base Connector
Bird
Window
2 Walls
Handle (2 Pieces)
2 Bases
2
Ba
se
s

4
Assembly
• Insert four screws into the base connector and tighten.
• Turn the assembly upright.
1
• Turn over both bases on a flat surface.
• Fit the base connector onto the bases.
Hint: The base connector is designed to fit on the bases one way.
If it does not seem to fit, turn it around and try again!
3
• Position the gate so that the notched edge is up.
• Fit the peg on the bottom of the gate into the hole in the base
assembly A.
• While holding the gate in place, fit the wall with radio into the base
assembly B.
Wall with
Radio
Bottom Peg
Gate Notched Edge
Base Connector
Bases
4 Screws
2
A
CAUTION
This package contains small parts
in its unassembled state.
Adult assembly is required.
B
4
• Insert the remaining wall into the base assembly.
• Fit the top of each wall together.
Wall

5
Assembly
8
• Insert four screws into the holes labeled with a "1" on the other
side of the wall assembly and tighten.
6
• Carefully turn the assembly on its side.
• Insert eight screws into the holes in the bottom of the assembly
and tighten.
• Turn the assembly upright.
7
• Fit the bird onto the wall assembly, as shown.
5
• Fit the connector on one wall into the slot on the other wall.
Push firmly to secure in place.
• Tuck the wire into the slot so that it is not pinched when
assembling the window (in step 9).
Wire
Connector
Socket
8 Screws
2 Screws
2 Screws
Bird
FRONT VIEW
BACK VIEW
IMPORTANT! You must complete this assembly step for
proper function of this toy.

6
2 Screws
Assembly
10
• Insert four screws into window and tighten.
• Move the shutter on the window back and forth to ensure
proper assembly.
9
• Fit the window onto the wall assembly.
Hint: Slide the shutter on the window all the way to the right,
as shown, before attaching the window.
Window
Shutter
2 Screws
11
• Fit the handle pieces onto the top of the assembly.
Hint: The handle pieces are designed to only fit one way. If they do
not seem to fit, turn them around and try again!
Handle Pieces
12
• Insert three screws into the handle assembly and tighten.
3 Screws

7
• Locate the battery compartment on the back of the toy.
• Loosen the screws in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert three, new “AA” (LR6) alkaline batteries.
Hint: We recommend alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screws.
• If this product begins to operate erratically, you may need to
reset the electronics. Slide the power/volume switch off and
then back on.
• When sounds/lights from this toy become faint or stop, it’s time
for an adult to change the batteries.
• Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).
In exceptional circumstances, batteries may leak fluids that can
cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the product. Dispose of batteries safely.
Do not dispose of product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be
charged under adult supervision.
1,5V x 3
“AA” (LR6)
Battery Installation Battery Safety Information

8
Two Sides of Learning Fun!
Press the baby rooster
for music & sounds
Slide the window
from day to night
Flick the light
switch on and off
Slide the ribbon
for a surprise and
watch the lights
Spin the roller to
change pig from
muddy to clean
Flip the book pages
Feed the cow
veggie shapes
Swing the gate
Sort the veggie shapes
Drop the eggs for
counting fun
Turn the dial for
music and fun phrases
Three Interactive Play Modes!
• Slide the power/volume switch on the wall of the toy to ON
with low volume , ON with high volume or OFF .
• Slide the mode switch to Learning , Music or
Imagination mode.
Learning
• Learn alphabet, numbers, opposites and animals!
Music
• Hear songs, animal sounds, greetings and other fun sounds!
Imagination
• Listen to fun sound effects!
Power/Volume
Switch
Mode Switch