Fisher-Price Alpha Bus Fun2Learn J7935 User manual

J7935
www.fisher-price.com
Alpha Bus™

For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd.,Mississauga, Ontario L5R 3W2;
www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. J7935pr-0920
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
Ready For More Learning Fun?
Preschool Center
J6870
CalcuBotTM
J6666
LaughtopTM
J6665
PlayPodTM
J7936
Look for other great Fun2LearnTM toys - each with different skills to practice!
Each sold separately and subject to availability.

3
Learning Fun!
• Turn a card so the letters side is up.
• Slide the card into the slot in the bus.
• Press a letter to hear it identified and learn a word that begins with that letter.
• Press again and you are asked to draw the letter.
Slide the power/volume switch
on the back of the toy to either
on with low volume ;
or on
with high volume .

4
• Turn a card so the drawing side is up.
• Slide the card into the slot on
the bus.
• Press the first button on the left to learn the first step in creating a drawing.
• Press the next button to learn the second step. Continue on to complete your drawing
step-by-step.
Drawing Fun!
4

Before
First-Time Use
IMPORTANT! Before first-time use, com-
pletely darken the drawing screen with
the magnetic pencil. Slide the eraser lever
slowly from side to side to clear the drawing
screen. Repeat this procedure several times
to enable the drawing screen to create the
clearest, darkest images.
5
• Please keep this instruction sheet for
future reference, as it contains
important information.
• Requires three “AA” batteries (included).
• Adult assembly is required for
battery replacement.
• Tool needed for battery replacement:
Phillips screwdriver (not included).
Consumer
Information
Visit us on-line at
www.service.fisher-price.com.
Call our Consumer Relations Department, toll-free
at 1-800-432-5437, 9 AM - 7 PM EST Monday
through Friday and 11 AM - 7 PM EST Saturday.
Hearing-impaired consumers using TTY/TD
equipment, please call 1-800-382-7470.
Write to us at:
Fisher-Price®Consumer Relations
636 Girard Avenue
East Aurora, New York 14052

Battery
Replacement
For best performance, we recommend
replacing the batteries that came with
this toy with three, new “AA” (LR6)
alkaline batteries.
• Locate the battery compartment on the
back of the toy.
• Loosen the screw in the battery compart-
ment door with a Phillips screwdriver.
Remove the battery compartment door.
Throw the exhausted batteries away.
• Insert three “AA” (LR6) alkaline batteries, as
indicated inside the battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds or lights from this toy
become faint or stop, it's time for an
adult to change the batteries!
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery
leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1.5V x 3
"AA" (LR6)
Shown Actual Size
Battery Safety
Information
6
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.

• Store the cards in the slot in the side of
the bus.
• Fit the pencil into the hole in the side of
the bus.
IMPORTANT! To avoid damage to the
drawing screen:
• Use only the magnetic pencil included.
• Do not use regular pencils, pens, crayons,
or markers.
• Keep this toy away from extreme heat
sources such as ovens, heaters, radiators
and hot vehicles.
• Do not apply heavy pressure or force to
the drawing screen. Heavy pressure is not
necessary and could damage the drawing
screen. A light touch makes a dark line.
• Use only the special, magnetic pencil
included. Do not use any other object
on the drawing screen.
All Finished
• When your child is finished playing with
this toy, slide the power/volume switch
off o.
7
Important!

8
United States Only
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference
in a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guar-
antee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be deter-
mined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void
the user's authority to operate
the equipment.
Care FCC Statement
• Wipe this toy with a clean cloth dampened
with a mild soap and water solution. Do
not immerse this product.
• Keep water, sand and dirt off this product.
• This toy has no consumer serviceable
parts. Please do not take this toy apart.
8