Fisher-Price N7298 User manual

www.fisher-price.com
N7298
Please keep this instruction sheet for future reference,
as it contains important information.
Requires two “AAA” batteries (included) for operation.
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).

Battery Replacement
1.5V x 2
“AAA” (LR03)
For best performance, we recom-
mend replacing the batteries that
came with this toy with two, new
“AAA” (LR03) alkaline batteries.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert two, “AAA” (LR03) alkaline
batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment
door and tighten the screw with a
Phillips screwdriver. Do not
over-tighten.
• If this toy begins to operate
erratically, you may need to reset
the electronics. Remove the
batteries and replace them in
the toy.
• When sounds from this toy become
faint or stop, it’s time for an adult to
change the batteries!
Battery Safety Information
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Dispose of batteries safely. Do not
dispose of this product in a fire.
The batteries inside may explode
or leak.
• Never short-circuit the battery
terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries
from the toy before charging.
• If removable, rechargeable
batteries are used, they are
only to be charged under adult
supervision.
• Protect the environment by
not disposing of this product
with household waste
(2002/96/EC). Check your
local authority for recycling
advice and facilities
(Europe only).

Fun Sounds
• Press the button on the stove to
hear fun kitchen sounds!
Care
• Wipe the toy with a clean cloth
dampened with a mild soap and
water solution.
• Do not immerse the toy.
Cet appareil numérique de la classe
Best conforme à la norme NMB-003
du Canada.
L’utilisation de ce dispositif est
autorisée seulement aux conditions
suivantes: (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre le fonctionnement du
dispositif.
NMB-003
This Class B digital apparatus complies
with Canadian ICES-003.
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference and (2) this
device must accept any interference
received, including interference that
may cause undesired operation.
ICES-003

Fisher-Price, Inc. a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA N7298pr-0920
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to cor-
rect the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.