Fisher-Price Starry Night Mobile User manual

w
w
w.
fi
s
he
r
-p
r
i
c
e
.
c
o
m
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires four “D” (LR20) alkaline batteries for the mobile
and two “AA” (LR6) alkaline batteries for the remote. (Batteries not included.)
Tool required for battery installation: Phillips screwdriver (not included).
Product Number: 73458

Parts
Clamp
Crib Adapter
Base
3 Star
Spokes
3 Soft Toy
Spokes
3 Soft Toys
Arm
Hub
#6 x 5/8" Screw - 1
Both Shown Actual Size
#6 x 3/8" Screw - 3
Remote
2
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• When used on a dresser top, keep out of baby’s reach.
• Always attach by all provided fasteners (clamp) tightly to a crib or playpen accord-
ing to the instructions. Check frequently.
• Do not add additional strings or straps to attach to a crib or playpen.
IMPORTANT!
CAUTION
• Possible entanglement injury, keep out of baby’s reach.
• Remove mobile from crib or playpen when baby begins
to push up on hands or knees.
• This toy contains small parts in its unassembled state.
Adult assembly is required.

Star Dome – Projects starry images onto baby’s ceiling.
Start Button – Starts or restarts music and soothing lights.
Light Select Button – Choose star dome light, night light, both lights
or no lights.
Song Select Button – Press to choose from five songs or no music
at all.
Power/Volume Switch - Choose high volume , low volume
or power off .
Receiver Dome – Accepts signal from the remote. Dome needs to be
turned so it aligns with the transmitter window on the remote
Night Light – Features softly glowing colors.
Mobile Features
3
1
2
3
4
5
6
7
1
2
3
4
5
6
7

Remote Features
4
Button - Press to activate the mobile once the mobile has been
turned ON.
LED Signal Indicator - Lights when the button is pressed to let you
know the remote has transmitted a signal to the transmitter.
Transmitter Window - Remote transmits a signal to the receiver dome
on the mobile.
Handle - Flips up so you can hang the remote on a door knob. Snaps
around bottom of the remote when not in use.
Battery Compartment - Insert two “AA” alkaline batteries. Please refer
to Battery Installation on page 6. For longer battery life, use alkaline bat-
teries only.
®
Rear View
Front View
1
1
2
3
4
5
3
4
4
5
2

Mobile Base
• Locate the battery compart-
ment door on the back of the
mobile base.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert four “D” (LR20) alkaline bat-
teries, as indicated inside the bat-
tery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compart-
ment door and tighten the screws
with a Phillips screwdriver. Do not
over-tighten.
IMPORTANT! Under normal use con-
ditions, the batteries in the mobile will
require replacement more often than
the batteries in the remote. When
sounds or light become faint or
movement of the mobile is sluggish,
it’s time for an adult to replace the
batteries in the mobile base.
Remote
• Locate the battery compartment
door on the back of the remote.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert two “AA” (LR6) alkaline bat-
teries, as indicated inside the bat-
tery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compart-
ment door and tighten the screw
with a Phillips screwdriver. Do not
over-tighten.
IMPORTANT! If the mobile does not
respond to the remote, it does not
mean that the battery power in the
remote is low. Replace the batteries in
the remote if the LED signal indicator
on the remote is dim when the but-
ton is pressed. If the LED signal indica-
tor does not light after installing new
batteries in the remote, check the ori-
entation of the batteries in the bat-
tery compartment to make sure they
are properly installed.
Battery Installation
5
Mobile Base Remote

• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove
exhausted batteries from the toy. Battery leakage and corrosion can dam-
age this toy. Dispose of batteries safely.
• Do not dispose of batteries in a fire.The batteries may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
“Battery Installation” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed from the toy before they
are charged.
• If you use a battery charger, it should be examined regularly for damage to
the cord, plug, enclosure and other parts. Do not use a damaged battery
charger until it has been properly repaired.
Battery Tips
6
1.5V x 2
“AA” (LR6)
Shown Actual Size
1.5V x 4
“D” (LR20)
Shown Actual Size
+-

• Locate the three star spokes.
• Insert and “snap” the tabs on the ends of the star spokes into the slots in
the hub, as shown.
Assembly
7
Star Spoke
Tab
Slot
Hub
• Locate the three soft toy spokes.
• Place the end of the spoke with the larger hole onto the matching hole on
the hub, as shown.
• Insert a #6 x 3/8" screw through the spoke and into the hub.Tighten the
screw with a Phillips screwdriver. Do not over-tighten.
• Repeat this procedure to attach the other two soft toy spokes.
Soft Toy Spoke
Hub
#6 x 3/8" Screw
Shown Actual Size
1
2

• Fit a soft toy string through the slot in the end of a soft toy spoke.
• Pull down gently on the soft toy to secure the string in the soft toy spoke.
• Repeat this procedure to attach the remaining soft toys to the other two
soft toy spokes.
Assembly
8
3
Soft Toy Spoke
Soft Toy String Soft Toy String
Slot

Assembly
9
• Insert and “snap” the arm into the hole in the side of the hub.
• Fit the arm into the slot in the base, as shown.
• Insert the #6 x 5/8" screw through the arm and into the base.Tighten the
screw with a Phillips screwdriver. Do not over-tighten.
Base
#6 x 5/8" Screw
Shown Actual Size
Arm
4
Hub Arm

• Position the base so that the battery compartment door is facing you.
• Fit the tabs on the crib adapter into the slots in the base.
• Push the crib adapter toward the arm to “snap” it into place.
Crib Use
10
Base Battery
Compartment
Door
Push
Crib
Adapter
Arm
Arm
• Fit the mobile base on to the crib top rail so that the threaded peg extends
outside of the crib.
• Fit the clamp onto the threaded peg and turn the clamp clockwise to
secure the base to the crib rail. Do not over-tighten the clamp.
Base
Threaded Peg
Crib Top Rail
Clamp

Use
11
IMPORTANT!
• In the unlikely event that use of the remote interferes with normal use of
other remote controlled equipment, such as televisions and stereos, or use
of other electric or battery powered appliances interfere with operation of
the mobile, do not use both appliances at the same time.
• For best performance between the mobile and the remote, avoid using the
remote in areas of bright light.
In bright natural or artificial light, you may notice loss of range. Move the
mobile or otherwise reduce the amount of light to improve performance.
Mobile Dome
• When using the remote, make sure that the arrow on the mobile’s dome is
pointing towards the transmitter window on the remote. For best results,
the path between the transmitter window on the remote and the dome
on the mobile are in a direct line and free of obstacles. Rotate the
mobile dome so that the arrow points to the area from which you’re
most likely to use the remote. For example, if you’ll most often be using
the remote from the doorway of the nursery, make sure that the arrow on
the mobile dome is pointing towards the doorway and that the path
between the mobile dome and the doorway is free from obstructions.

Power/Volume Switch
• The switch has three positions: off ; on with low
volume and on with high volume .
• Slide the power/volume switch to the off position
when not in use.
Start Button
• Press the start button to activate music and lights.
• The mobile will play for approximately five minutes.
• To restart the mobile, press the start button again.
Song Select Button
• Press the button to choose from five different
songs and no music (lights only).
• Each time you press the song select button the
mobile will switch to the next of the selections until
it returns back again to the first.
Light Select Button
• Press the button to choose four different light
modes:
-Light the star dome and project starry images on
your baby’s ceiling.
-Light the night light with soft glowing colors.
-Light both the star dome and night light.
-Turn lights off (music only).
• Each time you press the light select button the
mobile will switch to the next of the four modes
until it returns back again to the first.
Use
12

• Locate the long tab near the threaded peg on the crib adapter.
• While pressing the tab with a coin or slotted screwdriver, slide the crib
adapter off of the base as shown.
• Store the crib adapter in a safe place for future crib use.
Dresser-top Use
13
Base
Crib Adapter
Base
Crib Adapter
Long
Tab
Press

14
Dresser-top Use
• Locate the knob on the arm.
• Turn the knob counter-clockwise to loosen the arm.
• Rotate the arm to an angled position as shown.
• Turn the knob clockwise and tighten the arm snugly.
• Place the mobile on a dresser top out of reach of baby.
Loosen Knob
Crib Use
Dresser-top Use
Rotate Arm Tighten Knob
Knob
Knob

Soft Toys
• To remove a soft toy, grasp its string and press the knot up through the
opening in the spoke.
• Slide the string through the slot in the spoke.
• Place the soft toys in a pillowcase. Wash them on a gentle cycle in cold
water. Tumble dry the toys on low heat. Do not use bleach.
The Mobile
• Wipe the toy with a clean cloth dampened with a mild soap and water
solution.
• Do not immerse the toy.
Care
15
1
Soft Toy Spoke
Soft Toy String
Slot

Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired con-
sumers using TTY/TDD equipment, please call 1-800-382-7470.
Or, write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052
For other countries, outside the United States:
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
Great Britain: telephone [phone].
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Consumer Information
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2001 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China 73458pr-0920
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufac-
turer responsible for compliance could void the user's authority to operate
the equipment.
FCC Note (United States Only)