Fisher-Price T4262 User manual

Please keep this instruction sheet for future reference,
as it contains important information.
Adult supervision is required.
Never use near steps.
Choose areas for riding that are free of obstacles.
Learn to stop safely.
Use with caution as this product requires skill to operate safely to
avoid falls, collisions, and injuries to yourself (the rider) and others.
Maximum weight: 44 lbs. (20 kg).
For ages between 9 months and 3 years.
Requires three “AA” batteries (included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
fisher-price.com
Please keep this instruction sheet for futu
T4262

2
PRINTED IN MEXICO T4262pr-0922
©2011 Mattel. All Rights Reserved.
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority
to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

3
CAUTION
This package contains
small parts in an
unassembled state. Adult
assembly is required.
Assembled PartsConsumer
Information
2 Rear Wheels
Base
Front Axle
Head
2 Handles
#8 x 3/4" (1,9 cm) Screw - 10
Shown Actual Size
Tighten and loosen all screws
with a Phillips screwdriver.
Do not over-tighten.
2 Front Wheels
ICES-003
This Class B digital apparatus
complies with Canadian ICES-003.
Operation is subject to the following
two conditions: (1) this device may
not cause harmful interference
and (2) this device must accept
any interference received,
including interference that may
cause undesired operation.
NMB-003
Cet appareil numérique de
la classe B est conforme à la
norme NMB-003 du Canada.
L’utilisation de ce dispositif est
autorisée seulement aux conditions
suivantes: (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter
tout brouillage radioélectrique
reçu, même si ce brouillage est
susceptible de compromettre le
fonctionnement du dispositif.
• Wipe this toy with a clean cloth
dampened with a mild soap and
water solution. Do not immerse
this toy.
• This toy has no consumer
serviceable parts.
• Do not take this toy apart. Do not
drop this toy on a hard surface.
• Periodically inspect this product
for wear or damage. Check all
nuts and bolts, and tighten as
needed. Replace worn or broken
parts immediately.

4
• Place the base on a flat surface
so that the bottom faces you.
• Insert and “snap” the rear wheels
into the sockets in the base.
Hint: This may require some force.
• Pull up on the rear wheels to be
sure each is secure to the base.
• Fit the front wheels to the front
axle, as shown.
• Insert a screw into each front
wheel and tighten.
Rear Wheels
Assembly
1
1
Base
Front Axle
Front Wheels
BOTTOM VIEW
Head
• Turn the base assembly upright.
• Fit the head onto the
base assembly.
1
4
• Fit the front wheel assembly to
the base, as shown.
• Insert four screws into the front
wheel assembly and tighten.
1
3
FRONT VIEW
1
2

5
Assembly
Handles
• Fit a handle into the socket on
each side of the head.
Hint: Turn each handle so that
each fits into the socket .
• Push both handles until the
"snap" together.
• Pull on each handle to be sure
they are secure in the sockets.
1
6
Screws
• Insert two screws into each side
of the head and tighten.
1
5
BACK VIEW
Screws
Rewarding Lights
and Music!
• Slide the power/volume switch
on the back of the dino's head
to ON with low volume or ON
with high volume .
• Press the lights or roll the dino
along for music and fun sounds!
• When you are finished playing
with this toy, slide the power/
volume switch OFF .
• Wipe this toy with a clean cloth
dampened with a mild soap and
water solution. Do not immerse
this toy.
• This toy has no consumer
serviceable parts.
• Do not take this toy apart. Do not
drop this toy on a hard surface.
• Periodically inspect this product
for wear or damage. Check all
nuts and bolts, and tighten as
needed. Replace worn or broken
parts immediately.

6
1,5V x 3
“AA” (LR6)
Battery Replacement
For best performance, we
recommend replacing the
batteries that came with three
"AA" (LR6) alkaline batteries.
• Locate the battery compartment
on the side of the dino.
• Loosen the screws in the battery
compartment door. Remove
the battery compartment door.
Remove the exhausted batteries
and dispose of them properly.
• Insert three, new "AA" (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws.
• If this toy begins to operate
erratically, you may need to reset
the electronics. Slide the power/
volume switch off and then
back on.
• When lights or sounds from
this toy become faint or stop,
it’s time for an adult to change
the batteries!
Battery Safety
Information
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or
ruin your product. To avoid
battery leakage:
• Do not mix old and new
batteries or batteries of different
types: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated
inside the battery compartment.
• Remove batteries during long
periods of non-use. Always
remove exhausted batteries from
the product. Dispose of batteries
safely. Do not dispose of this
product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type as recommended.
• Do not charge non-
rechargeable batteries.
• Remove rechargeable batteries
from the product before charging.
• If removable, rechargeable
batteries are used, they are
only to be charged under
adult supervision.
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC).
Check your local authority
for recycling advice
and facilities.

7
To change to Walker mode, follow these steps:
Walker
• Turn the toy over. Press and slide
the latch to an open position,
as shown.
1
1
• Spread the seat halves until they
“click” in place. Turn the toy
over. It is now ready to be used
as a walker.
1
2
Latch
Latch
Press
Press
Slide
Slide
1
2
Bottom View

8
To change to Ride-On mode, follow these steps:
Ride-On
Press
Press
• While pressing the seat button,
close the seat halves. Turn
the toy over.
1
1
• Slide the latch to a closed
position. It should “click” into
place.Turn the toy over. It is now
ready to be used as a ride-on.
1
2
Latch
Latch
T
o c
h
an
g
e to Ri
d
e-On mo
d
e,
f
o
ll
ow t
h
ese
s
Ride
-
On
Top View Bottom View