Fisher-Price P3305 User manual

Please keep this instruction sheet for future reference,
as it contains important information.
Requires three "AA" batteries for ramp operation (not included) and
three "AA" batteries for ferris wheel operation (included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
P3305
www.fisher-price.com

Assembled Parts
CAUTION
This product contains small parts
in its unassembled state.
Adult assembly is required.
Base
Rocket Ship Ride
Teacup Ride
Ramp
Upper Track Support
(Larger)
Lower Track Support
(Smaller)
Ticket Booth
Upper Track
Lower Track
Flag
#8 x 1/2" Screw - 2
Shown Actual Size
2

Assembly
3
• “Snap”the ramp into the base.
• Fit the base onto the teacup ride. Press down on the base to
"snap"in place.
Teacup Ride
Base
Ramp
Base
2
2
1

Assembly
4
• Turn the upper track face down. Fit the upper track support
(larger) to the peg on the upper track.
• Turn the lower track face down. Fit the lower track support
(smaller) to the peg on the lower track.
• Insert a screw into each track support and tighten with a
Phillips screwdriver. Do not over-tighten.
Lower Track
Support (Smaller)
Upper Track
Support
(Larger)
Lower Track
Upper Track
• "Snap" the lower track into the base under the ramp A.
• "Snap" the upper track into the end of the ramp B.
• "Snap" the upper track to the lower track C.
Lower Track
Upper Track
C
BA
Ramp
3
4

Assembly
Flag
5
Ticket Booth
5
• “Snap”the ticket booth and rocket ship ride to the main
assembly.
• Insert the flag into the top of the ticket booth or the hole in
the upper track.
Rocket Ship Ride

Consumer Information
Care
• Wipe the toy with a clean cloth dampened with a mild soap
and water solution.
• Do not immerse the toy.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
© 2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA P3305a-0920
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Protect the environment by not disposing of this•
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities
(Europe only).

Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can
cause a chemical burn injury or ruin your product. To avoid
battery leakage:
Do not mix old and new batteries or batteries of different•
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
Insert batteries as indicated inside the battery compartment.•
Remove batteries during long periods of non-use. Always•
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of this product in a fire.
The batteries inside may explode or leak.
Never short-circuit the battery terminals.•
Use only batteries of the same or equivalent type,•
as recommended.
Do not charge non-rechargeable batteries.•
Remove rechargeable batteries from the product•
before charging.
If removable, rechargeable batteries are used, they are only•
to be charged under adult supervision.
• This Class B digital apparatus complies with
Canadian ICES-003.
• Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Cet appareil numérique de la classe B est conforme à la•
norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux•
conditions suivantes: (1) il ne doit pas produire de brouillage
et (2) l’utilisateur du dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même si ce brouillage est
susceptible de compromettre le fonctionnement du dispositif.
NMB-003
ICES-003
7

FCC Statement (United States Only)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
Note: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
8

9
Battery Installation
• Locate the battery compartment on the back of the ramp and
bottom of ferris wheel.
• Loosen the screw in each battery compartment door with a
Phillips screwdriver. Remove each battery compartment door.
• Remove the exhausted batteries from the ferris wheel and
throw them away.
• Insert three "AA" (LR6) alkaline batteries in each toy.
Hint: We recommend using alkaline batteries for
longer battery life.
• Replace each battery compartment door and tighten each
screw with a Phillips screwdriver. Do not over-tighten.
• If the toys begin to operate erratically, you may need to reset
the electronics. Slide the power switch on each toy off and
then back on.
• When sounds from this toy become faint or stop, it’s time for
an adult to change the batteries.
Ferris Wheel Ramp
"AA" (LR6)
1.5V x 6

• Slide the power switch on the back of the ramp and bottom
of the ferris wheel ON •.
Hint: If your child is not actively playing with this toy, it turns
off automatically (sleep mode).
• When finished playing with this toy, slide each power switch
OFF o .
10
On/Off Switch
o
•
Spinning Fun, Lights and Music!