Fisher-Price K9873 User manual

Better Batter™
BASEBALL
www.fisher-price.com
www.fisher-price.comwww.fisher-price.com
Model K9873Model K9873
Better Batter

Parts
Parts
3 Balls
Main Assembly
SHOWN ACTUAL SIZE
Note: Tighten and loosen
all screws with a
Phillips Screwdriver.
Do not over-tighten the screws.
#6 x 5/8" (1.6 cm) Screws - 14
Lower Arm
Leg with Button
Base
Upper Arm
Leg
Home Plate
Tether
Bat

Consumer Information
Consumer Information
• Please keep this instruction sheet for future reference, as it contains important information.
• Adult assembly is required.
• Tool needed for assembly: Phillips Screwdriver (not included).
• Requires three “C” (LR14) alkaline batteries (not included).
CAUTION
This product contains small parts
in its unassembled state.
Adult assembly is required.
©2006 ESPN, Inc. All Rights Reserved. www.ESPN.com
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.

Assembly
Assembly
Leg with Button
Socket
3
2
• Insert the upper post into the lower post on
the main assembly. Make sure the rib on
the upper post fits into the groove on the
lower post.
Hint: This will require some force.
• Push the lever into one of the slots on the side
of the upper post.
• Feed the plug on the end of the main assembly
through the round opening in the base.
• "Snap" the main assembly into the base.
Lever
• Turn the assembly on its side.
• Fit the base onto the leg with the button,
as shown.
• Insert four screws into the bottom of the leg
and tighten.
• Fit the plug coming from the underside of the
base into the socket in the leg with the button.
1
4
PRINTED IN CHINA K9873pr-0920
Upper
Post
Plug
Base
Plug
Bottom View
5
• Fit the other leg to the base and leg with the
button, as shown.
• Insert six screws into the leg and tighten.
Leg
Lower
Post

Assembly
• Set the assembly upright.
• Position home plate over the leg assembly for
either a left or right-handed batter, as shown.
• Fit home plate onto the legs.
Left-Handed
Hitter
6
Assembly
Right-Handed
Hitter
7
• Turn the assembly on its side.
• Insert four screws through the legs and into
home plate. Tighten the screws.
Bottom View
8
• "Snap" the upper arm to the lower arm.
Lower Arm
Upper Arm
9
• "Snap" the arm assembly to the top of the
main assembly.
10
• "Snap" the tether into the arm.
Tether

Battery Safety
Information
Battery
Installation
Battery Safety
Information
Battery
Installation
• Locate the battery compartment on the toy.
• Loosen the screws in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert three "C" (LR14) alkaline batteries, as
indicated inside the battery compartment.
Hint: We recommend using alkaline batteries
for longer battery life.
• Replace the battery compartment door and
tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• When sounds become faint or stop, it's time
for an adult to change the batteries!
• Protect the environment by not dis-
posing of this product with household
waste (2002/96/EC). Check your local
authority for recycling advice and
facilities (Europe only).
1.5V x 3
"C" (LR14)
In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or
ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of non-
use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.

Step-Up to the Plate!
Step-Up to the Plate!
• Load three balls into the cage.
1
• Turn the power switch to ON .
2
• Lift the lever and raise or lower the post to the
appropriate height for your child.
• Push the lever into one of the slots on the side
of the upper post to secure the height.
3
Lever
Lever
• Tap home plate with the end of your bat to
load a ball. You'll hear fun sound effects
and commentary!
Hint: For best results, make sure the balls are
clean and dry.
4
• Swing and hit the ball.
• Tap the plate to load another ball.
• When you're finished playing with the toy, turn
the power switch to OFF .
5
IMPORTANT! Only use balls supplied with this toy.

Consumer Information
Consumer Information
BATTING TIPS
• We recommend that this toy be used outdoors.
• Do not use outdoors when it is raining or there
is wet grass. The balls will not load properly.
• Be sure that when your child is batting, there
are no other children in or around the batting
area, including directly in front of the toy.
• This toy is designed for use with soft balls and
plastic bat (both included). It is not designed
for use with wooden or metal bats, or regula-
tion baseballs or softballs. Use of these balls
and bats may damage this toy.
• Hold the bat with hands together, about one
or two inches (5 cm) from the knob at the end
of the bat.
- Right-handed batters should have the right
hand on top of the left hand.
- Left-handed batters should have the left
hand on top of the right hand.
• Stand with feet about shoulder width apart.
• Swing with a smooth and level motion.
CARE
• Do not leave this product outdoors. Store this
product indoors when not in use.
• This product may be wiped clean using a
mild cleaning solution and a damp cloth. Do
not use bleach. Do not use harsh or abrasive
cleaners. Rinse clean with water to remove
residue. Do not immerse this product.
• For best performance, keep balls clean
and dry.
• Periodically inspect this product for wear and
damage and replace any cracked parts.
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2;
www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
QUESTIONS?
Visit us on-line at
www.service.fisher-price.com
Call our Consumer Relations Department, toll-free
at 1-800-432-5437, 9 AM - 7 PM EST Monday
through Friday and 11 AM - 5 PM EST Saturday.
Hearing-impaired consumers using TTY/TDD
equipment, please call 1-800-382-7470.
Write to us at: Fisher-Price®Consumer Relations,
636 Girard Avenue, East Aurora, New York 14052.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could
void the user's authority to operate the equipment.