Fisher-Price W9893 User manual

W9893
fisher-price.com
Please keep this instruction sheet for future reference, as it
contains important information.
Adult assembly is required for battery installation.
Requires three “C" (LR14) alkaline batteries
(not included).
Tool required for battery installation: Phillips screwdriver
(not included).

Battery Installation
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove it.
• Insert three, new "C" (LR14)
alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment
door and tighten the screws.
Do not over-tighten.
• If this toy begins to operate
erratically, you may need to reset
the electronics. Slide the power/
volume switch off and back on.
• When sounds or lights become
faint or stop, it's time for an adult
to change the batteries.
Battery Safety
Information
In exceptional circumstances,
batteries may leak fluids that can cause
a chemical burn injury or ruin your toy.
To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Dispose of batteries safely. Do not
dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.
• Protect the environment by
not disposing of this product
with household waste
(2002/96/EC). Check your
local authority for recycling
advice and facilities.
1,5V x 3
“C” (LR14)

Select a Show!
• Insert a slide into the top slot on the
back of the toy.
- Slide 1 features high-contrast
images for newborns.
- Slide 2 engages babies 3 months
and older with colors and motion.
- Slide 3 features more complex
and colorful details for babies
6 months and older.
• Slide the power/volume switch to:
ON with low volume
ON with high volume
Power/Volume
Switch
Mode Switch
Sounds Button
Music Button
• Turn the mode switch to:
music only
music and lights
lights only
• Press the music or sounds
button. Music or sounds play for
approximately 20 minutes.
• Adjust the penguin's position for
ceiling or wall projection.
• When you are finished playing with
this toy, slide the power/volume
switch OFF .
• Store extra slides in the slots above
the battery door.
Slide
Slide
Storage
Storage

CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
W9893a-0920
©2012 Mattel. All Rights Reserved. PRINTED IN CHINA
ICES-003
This Class B digital apparatus complies
with Canadian ICES-003. Operation is
subject to the following two conditions:
(1) this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes
:
(1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est
susceptible de compromettre le
fonctionnement du dispositif.
Consumer Information
FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Care
• Wipe this toy with a clean, damp cloth.
Do not immerse.
• This toy has no consumer serviceable
parts. Do not take apart.