Fisher-Price X6031 User manual

fisher-price.com
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AAA” (LR03) alkaline batteries (not included) for operation.
Adult assembly is required. Tool required: Phillips screwdriver (not included).
X6031

2
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Consumer Information
PRINTED IN CHINA X6031pr-0920
©Disney
©2012 Mattel. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, except as noted.
Care
• Wipe this toy with a clean, damp cloth. Do not immerse.
• This toy has no consumer serviceable parts. Do not take apart.

3
Assembled Parts
This package contains small parts. For adult assembly only.
CAUTION
Balcony
Clock Tower
Short Tower
Base
Tall Tower
2 Flags
Floor
Wall
Part not shown: Label Sheet
3 mm x 15 mm Screw – 7
Shown Actual Size
Tighten and loosen all screws with
a Phillips screwdriver. Do not over-tighten.
3 mm x 15 mm Washer Head Screw – 2

4
Assembly
2
• Fit the pegs on the short tower into the openings in the wall.
1
• Fit the pegs on the tall tower into the openings in the wall.
Short Tower
Assembly
Tall Tower
Wall

5
Assembly
3
• Fit the tabs on the clock tower into the slots in the floor. Push to “snap” in place.
Floor Slots
Clock Tower Tabs

6
4
• Carefully lay the wall assembly on a flat surface with the inside facing up.
• Slide the tab on front edge of the clock tower assembly into the groove in the
wall assembly A.
• Fit the peg on the side of the clock tower assembly onto the post on the tall tower B.
5
a
ss
em
Assembly
SIDE VIEW
TOP VIEW
Peg
Post
Clock Tower
Assembly Tab
Wall Assembly
Screws
Screw B
A
• Align the hole in the clock tower assembly with the post on the wall assembly. Insert a
3 mm x 15 mm screw into the post A. Insert two 3 mm x 15 mm screws into the holes
in the clock tower B. Tighten the screws.
BA

7
Assembly
6
• Align the slots in the clock tower assembly with the holes in the posts in the wall
assembly. Insert two 3 mm x 15 mm washer head screws and tighten.
7
• Fit the balcony onto the wall.
Balcony
2 Washer Head
Screws

8
9
• Fit the tabs on the wall assembly into the slots on the base. Push to “snap” in place.
• Insert two 3 mm x 15 mm screws into the balcony and two 3 mm x 15 mm screws into
the wall assembly and tighten.
8
Base
Screws
Screws
S
S
S
Assembly

9
Assembly
10
• Place the flags on top of the towers.
2 Flags

10
Decoration
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has been applied.
Front
10
11