Fisher-Price W9913 User manual

www.fisher-price.com
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
W9913

2
Important Information
WARNING
Prevent Entanglement Injury
Crib Mobile Use
•Keepoutofbaby'sreach.
•Removemobilefromcriborplaypenwhenbabybeginstopush
up on hands and knees.
•Thisproductmaynotattachtoallcribdesigns.Donotadd
additionalstringsorstrapstoattachtoacriborplaypen.
Stroller Toy Use
•Donotattachlinkdirectlytocriborplaypen.
CAUTION
Thispackagecontainssmallpartsinanunassembledstate.
Adult assembly is required.
•Useasamobilefrombirthuntil5months.
•Amobileisintendedforvisualstimulationandnottobegraspedbyachild.

3
Assembled PartsImportant Information
Arm
(Upper)
Mobile
Mobile Link
Giraffe
Screw is shown actual size.
Tighten all screws with a Phillips screwdriver.
Do not over-tighten the screws.
M3,5 x 15 mm Screw – 5
Mobile Link Cover
Arm
(Lower)
Base

4
Assembly
•Fitthelowerarmintothesocketinthebackofthebase.
Hint: You may need to pull the attachment strap on the base down to fit the arm
in the base.
1
1
12
Arm
(Lower)
Base Socket
•Insertascrewintothelowerarmandtighten.

5
Assembly
13
•Fittheupperarmtothelowerarm.
Arm
(Upper)
Arm
(Lower)

6
Assembly
14
15
•Insertfourscrewsintothearmassemblyandtighten.
•First,alignthetabsontheendofthearmwiththeslotsinthebackofthegiraffe.
•Then,turnthegiraffeto"snap" in place on the end of the arm.
•Fittheupperarmtothelowerarm.
FisherPrice,Inc.,asubsidiaryofMattel,Inc.,EastAurora,NY14052U.S.A.
©2011Mattel,Inc.AllRightsReserved.®and™designateU.S.trademarksofMattel,Inc.
PRINTED IN CHINA W9913a-0920
Arm Tabs
Giraffe Slots

7
•Fittheflatendofthemobilelinkintothegrooveinthemobile.
•Fitthemobilelinkcoverontothetopofthemobile.
•Tightenthescrews.
Hint: The screws are assembled to the mobile link cover.
Mobile Link
Mobile Groove
Mobile Link Cover
Mobile Link
16
17
Assembly

8
•Fittheendsofthemobilelinkontothemobilearm.
•Pushto“snap” the link in place.
Mobile Arm
Mobile Link
18
Assembly

9
Mobile Use Crib Attachment
IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.)
tightly to a crib or playpen according to the instructions. Do not add additional
strings or straps to attach to a crib. Check frequently.
•Positionthetoyinsidethecrib.
•Wrapthetoy’sattachmentstraparoundthecribtophorizontalrail.
•Slidetheendoftheattachmentstrapthroughtheslotonthebackofthetoy.
•Pulltheendoftheattachmentstrapupandfastentotheslotonthepegonthe
back of the toy.
Note:Thistoyshouldbesnugagainstthecribrailandspindles.Usethestrap
slotthatprovidesthetightestfit.
•Ifyouhaveexcessstrap,slidethefreeendoftheattachmentstrapunderthe
slot at the top of the attachment strap.
Crib Rail
Attachment Strap
Slot
Peg
1
1

10
Mobile Use Crib Attachment
•Makesurethedistancebetweenthebottomoftheproductandthecrib
mattress is at least 7 inches (18 cm).
•Ifthedistanceislessthan7inches(18cm):readjusttheattachmentstrapsto
lift the product; or lower the crib mattress.
Mattress
Crib Spindle
Bottom of Base At Least 7 Inches (18 cm)
•Tiethetoy’sstringstoacribspindle.
Note:Itisbettertotiethestringsinaknotthanabow,sinceabowmaybe
easily untied.
12
13