Fisher-Price Y5008 User manual

2
fisher-price.com
Y5008
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three AA (LR6) alkaline batteries (not included) for operation.
Adult assembly is required. Tool required for battery installation:
Phillips screwdriver (not included).
Wipe this toy with a clean, damp cloth. Do not immerse.
This toy has no consumer serviceable parts. Do not take apart.
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
PRINTED IN CHINA Y5008pr-0920
©2013 Mattel. All Rights Reserved.
CO
N
SU
MER A
SS
I
S
TAN
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

3 4
Connector
Assembled Parts
Base
ElevatorTower
2 Wavy Ramps 2 Curved Ramps Billboard
Ramp Support
2 Wavy Ra
mps
Crane
(2 pieces)
Assembly
• Fit the tabs on the bottom of the elevator into
the slots in the base. Push to “snap” in place.
• “Snap” the billboard into the slots in the tower.
• “Snap” the connector into the slots in the
elevator and tower.
• Fit the tabs on the bottom of the tower into the
slots in the base. Push to “snap” in place.
1
2
3
4
Elevator
Tower Connector
Billboard
Base

5 6
Assembly
• First, fit a ramp assembly through the opening
in the ramp Support.
• Then, “snap” the slot in the ramp assembly
onto the tab on the ramp support.
• Insert and “snap” the post on the upper crane
into the hole in the lower crane.
• “Snap” the crane onto the post on the top of
the tower.
y
5
7
Upper
Crane
Lower
Crane
• Fit a wavy ramp onto a curved ramp and push
to “snap” in place.
• Repeat to assemble the other wavy and
curved ramps.
6
Wavy
Ramp
Curved
Ramp
C
Ramp
Support
• “Snap” the slot in the remaining ramp assembly
onto the tab on the ramp support.
8
Assembly
Label Decoration
• Fit the lower tabs on the ramp assemblies into
the slots on the tower and the base. Push to
“snap” in place.
• Apply labels exactly as shown in
the illustration.
• Avoid repositioning a label after it has
been applied.
• Fit the upper tabs on the ramp assemblies into
the slots in the elevator. Push to “snap” in place.
•
Fit the lower tabs on the ramp assemblies into
9 10
6
a
s shown in
label after it has
10
9
2
1
3
7
45
6
8
3

7 8
1,5V x 3
AA (LR6)
Battery
Installation
• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
Battery Safety
Information
In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or
ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of non-
use. Always remove exhausted batteries from
the product. Dispose of batteries safely. Do not
dispose of this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are used,
they are only to be charged under
adult supervision.
For longer life, use alkaline batteries.
• Loosen the screw in the battery compartment
door and remove the door.
• Insert three AA (LR6) alkaline batteries.
• Replace the battery compartment door and
tighten the screw.
• If this toy begins to operate erratically, you may
need to reset the electronics. Slide the power
switch off and back on.
• When sounds/motion become faint or stop, it’s
time for an adult to change the batteries.
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003. Operation is subject to the
following two conditions: (1) this device may not
cause harmful interference and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes: (1) il ne doit
pas produire de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, meme si ce brouillage est
susceptible de compromettre le fonctionnement
du dispositif.
Slide the power ON or OFF .
Press the gas pump for sounds!
Send a vehicle down the ramp. Watch and listen as it
races down and the crane “catches” the getaway car!
Press the launcher to drive the
vehicle down the road!
2
3
4
Use
Pull the roll-out road to extend plat!
Slide the knob back and forth to retract the road.
Do not turn the knob.
1
5