Fisher-Price Barbie Tough Trike User manual

WARNING
TO AVOID SERIOUS INJURY:
• Adult supervision is required.
•
Never use near cars and other motor
vehicles, near streets, steps, sloped
driveways, hills, roadways, alleys, swimming
pools or other bodies of water.
• Always wear shoes.
• Never allow more than one rider.
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
Age: 2-5 years; Weight limit: 55 lbs (25 kg).
Product features and decoration may vary from photos shown.
IMPORTANT! It is a good practice to start training
children very young regarding the importance of
helmet use. When children are older and riding
bicycles and faster vehicles, it is important that
they use a helmet each and every time they ride.
For this reason, even while riding a tricycle, it is a
good idea to familiarize your child with helmet use,
so that it becomes a habit for life. Choose a helmet
that complies with requirements of the applicable
certifying agency for bicycle helmets.
www.fisher-price.com
TO A
V
• Ad
u
•
Nev
ve
hi
d
r
i
v
e
poo
• Alw
a
•
Ne
v

2
Wheel Hub
(Flat Side Down)
Bushing
(Grooved Side Down)
Straight
Axle
Rear
Wheel
(Indented
Side Down)
Parts Assembly
• Place one end of the straight axle into a .354" (0,9 cm) cap nut.
Tap the end of the straight axle with a hammer. Pull on the cap
nut to be sure it is securely attached to the straight axle.
• Slide a wheel hub, at side down, onto the straight axle.
• Slide a rear wheel, indented side down, onto the straight axle.
• Slide a bushing, grooved side down, onto the straight axle.
• Fit the seat onto the frame. Push rmly near the back end of the
seat to "snap" it into place.
Frame
Seat
PUSH
Straight
Axle
.354" (0,9 cm)
Cap Nut
• Tighten assembled screws with a Phillips screwdriver. Do not
over-tighten the screws.
• Please save all packaging material until assembly is complete to
ensure that no parts are discarded. Wipe each part with a clean,
dry cloth before assembly.
• Label sheet is not shown.
1
2
#8 x 2¼" (5,7 cm) Screw - 1
FASTENERS SHOWN ACTUAL SIZE
*We’ve included one extra
.354" (0,9 cm) cap nut for
your convenience.
#8 x ¾" (1,9 cm) Screw - 6.354" (0,9 cm) Cap Nut - 2*
.354"
CAUTION
This product contains small parts in its
unassembled state. Adult assembly is required.
Handlebar Front
Frame
Handlebar Back
Seat
Straight Axle
2 Bushings
2 Wheel Hubs
2 Wheel Caps
2 Rear Wheels
4 Pedal Hubs
Fork
2 Fork Covers
Front Wheel Assembly

3
Straight Axle Assembly
• Turn the frame upside down.
• Insert the straight axle assembly through the holes in the rear of
the frame.
• Turn the assembly upright.
• Slide a bushing, smooth side rst, onto the end of the
straight axle.
• Slide a wheel, at side rst, onto the end of the straight axle.
• Slide a wheel hub, pointed end rst, onto the end of the
straight axle.
Bushing
(Smooth Side First)
Wheel Hub
(Pointed End First)
Wheel
(Flat Side First)
Straight Axle
• Fit the tabs on the wheel cap into the slots in the wheel hub.
Push to "snap" the wheel cap in place.
• Repeat this procedure to attach the other wheel cap to the other
wheel hub.
• Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs
t into the slot in each pedal hub.
• Press the pedal hubs into the center of the front wheel until they
are ush with the surface of the front wheel.
• Repeat this procedure on the other side of the front wheel
assembly to assemble the other two pedal hubs.
• Fit a .354" (0,9 cm) cap nut on the end of the straight axle.
Hint: You may need the help of another adult to hold the other
end of the straight axle in place.
• Tap the cap nut with a hammer. Gently pull the rear wheel to
be sure the cap nut is securely attached to the straight axle.
Wheel Hub
Wheel Cap
Pedal Hubs
• Place the front wheel assembly between the fork arms. Make
sure the pedal axle ts into the groove at the bottom of each
fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x ¾" (1,9 cm) screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the other
fork arm.
Fork Arms
Pedal Axle
Groove
Fork Cover
#8 x ¾" (1,9 cm)
Screws
.354" (0,9 cm)
Cap Nut
Front Wheel
Assembly
3
Bottom View
4
5
6
7
8
Pedal Axle
Tabs

Assembly
Fork Post
Fork Covers
Rear Wheels
• With the fork covers facing the rear wheels, insert the fork post
up through the hole in the neck of the frame.
• Fit the handlebar front to the fork post.
Hint: The handlebar front is designed to assemble to the fork
post one way.
• Fit the handlebar back to the fork post and handlebar front. Hold
them together rmly.
• First, insert the remaining #8 x ¾" (1,9 cm) screws through the
outer holes in the handlebar back and tighten.
• Then, insert the #8 x 2¼" (5,7 cm) screw through the center
hole in the handlebar back and tighten.
Handlebar Front
¾" (1,9 cm) Screw
¾" (1,9 cm)
Screw
2¼" (5,7 cm)
Screw
Handlebar Back
• Periodically, check the plastic parts and if broken or cracked,
dispose of them properly.
• Periodically, check all fasteners regularly to be sure they are
tight. If the fasteners are not tight, tighten them as necessary.
• To clean, use a mild soap and water solution and a clean cloth.
Rinse clean with water to remove soap residue.
• Before applying the decorative labels, wipe the surface of the
trike with a clean, dry cloth to remove any dust or oils.
• Refer to the color photos located on the package aps to apply
the labels.
• For best results, avoid repositioning labels once applied.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO 00989pr-1035
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Consumer Information
Decoration
9
10