Flash F7300235 User manual

User Manual
Instrukcja Obsługi
F7300235
LED LOGO
PROJECTOR 50W

Attention:
Before installing and using this
equipment, please read each item of this
manual carefuly.
It is forbidden to disseminate the
contents of this manual with the permission
of demonstrating the scriptures.
     
information. All contents of the manual will
be changed at any time without notice.
Please do not modify the equipment at
will unless specifed in the instruction.
Make shure that the power supply
is disconnected before the machine is
installed and repaired.
IMPORTANT!
Do not point strong light output from other fixtures
at the LOGO PROJECTOR, as intense illumination
can damaged the parts.
      
demonstration. Please do not use
this product for a long time in humid


use and maintenance. If you want to use it
outdoors, do enough waterproof measures.
Installation, operation and maintenance
personnel must be familiar with the
product performance before they can start
operation. Most of the damage is caused
by unfamiliar with its performance and
misoperation.
       
cloth to keep dry.
2. SAFETY INFORMATION
1. INTRODUCTION
THANK YOU FOR PURCHASING LED LOGO Projektor 50W. FOR SAFETY REASONS
AND TO ENSURE THE TROUBLE-FREE OPERATION, CAREFULLY READ THE
INSTRUCTIONS.
WARNING!
User Manual •Instrukcja Obsługi
Figure 2.
Shield or shade the head if necessary.






Additional information: gobo wheel diameter (total):
38mm, pattern diameter: 25mm

LED LOGO PROJECTOR 50W •Art No F7300235
Fig. 1) of the machine, take out the lamp holder,
put the lamp in the lamp holder, and reassemble it.
4. INSTALLATION
3. PRODUCT INFORMATION





4.1 Voltage specification
Input Voltage Total Power Frequency
120-240V 50W 50/60Hz
Fig. 1
Top screws.

User Manual •Instrukcja Obsługi
OSTRZEŻENIE!
WAŻNE!



Rysunek 2. 


    LED LOGO Projektor 50W  
       

2. ZASADY BEZPIECZENSTWA
1. WPROWADZENIE
         


  
           


Informacja dodatkowa: średnica tarczy Gobo
(całkowita): 38mm, średnica wzoru: 25mm
     
    

    



     
powiadomienia.
    
      

   

     
   


     
    
     

    

    
   
     

     

3. INFORMACJE O PRODUKCIE






LED LOGO PROJECTOR 50W •Art No F7300235

User Manual •Instrukcja Obsługi
4. INSTALACJA
Fot. 1

Napięcie Zasilania Pobór Mocy Częstotliwość zasilania
120-240V 50W 50/60Hz
Fot. 1
Górne śruby.

LED LOGO PROJECTOR 50W •Art No F7300235

www.flash-butrym.pl
F7300235