Flash P7100546 User manual

User Manual
Instrukcja Obsługi
P7100546
Moving Head 19x15 ZOOM
(3 Sections)

Please keep this User Manual for future
      
another user, be sure that they also receive
this instruction booklet.
Unpack and check carefully there is no
transportation damage before using the

Before operating, ensure that the voltage
and frequency of power supply match the

It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.


only, but always by taking its base.

WARNING! The Moving Head 19x15W ZOOM has a powerful pan motor. The torque reaction
  
unsecured on a surface. Do not apply power to the Moving Head 19x15W ZOOM unless the
baase is securely fastened to a surface or to rigging hardware.
WARNING! 

 clockwise.
WARNING! 

use any type of clamp that does not completely encircle the structure when fastened.
WARNING! 
See Figure 2. The
Moving Head 19x15W ZOOM lens can focused the sun's rays, creating a potential fire hazard
and causing damage.
IMPORTANT!            Moving Head
19x15W ZOOM, as intense illumination can damaged the display.
Don’t operate it where the temperature is
higher than this.
In the event of serious operating problem,
     

carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare
parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation
and there might be a hazard of electric
shock.
To prevent or reduce the risk of electrical
  
rain or moisture.

visibly damaged.
Do not look directly at the LED light spot

2. SAFETY INFORMATION
1. INTRODUCTION
Moving Head 19x15W ZOOM
        

WARNING!
User Manual •Instrukcja Obsługi
Figure 2.


DMX
Controller DMX 512 DMX 512
Moving Head 19x15W ZOOM •Art No P7100546








       
holes on the bracket. Always ensure that
       
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to

5.1 Connecting DMX signal
     

4. INSTALLATION
5. CONNECTION
3. PRODUCT INFORMATION







weight. Also always use a safety cable that
can hold 12 times of the weight of the unit



of people and has no one pass by or under
it.
      



1
3
22
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
CAUTION!     
       



1
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45

The connection is performed using

    
operated by qualified personnel.
5.2 Voltage specification
Input Voltage Total Power Frequency
100~245V 300W 50/60Hz
5.3 Connecting power supply
CAUTION! In the case of cable damage do not attempt to repair.

a person with appropriate permissions.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not

Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s


reduce the life span of lamps and bulbs; intermittent using will
improve the life of bulbs and lamps.
User Manual •Instrukcja Obsługi

6. SETTING INTERFACE
Options Instructions
System Settings
DMX address
001-512 from machine status: receive
DMX signal from console or host
Press „ok” to enter edit status.
At this time, select the hundreds place,
press „up” and „down”.
The key changes the address code.
Click „ok” to select the ten editors again.
Click again „Determine” the key to select
the individual edit. Press the exit edit
status again.
The encoder
Start using encoder (optical coupling) to
judge the missing step and automatically
correct the position
Close the correct position without
encoder (decoupling)
X inversion Closed/open
Y inversion Closed/open
The operation
mode
The operation mode DMX/voice control/automatic
Channel selection 16CH/24CH
Display Settings Language selection Chinese, English
Pour screen Settings Shut down
The factory set up
The X axis calibration 128
The Y axis calibration 128
Focusing calibration 128
Red 220
Green 220
Blue 220
White 220
Logo to chose 000
Moving Head 19x15W ZOOM •Art No P7100546

User Manual •Instrukcja Obsługi
Channel Function
1Pan
2Tilt
3P/T Speed
4Dimmer
5Red (R) group 1
6Green (G) group 1
7Blue (B) group 1
8White (W) group 1
9Shutter
10 Focus
11 Function mode
12 Functional mode speed
13 Pan Fine
14 Tilt Fine
15 Rest(255)
16 Total (useless)
7. DMX CHANNELS
16 CH Mode
Setting

Channel Function
1Pan
2Tilt
3P/T Speed
4Dimmer
5Red (R) group 1
6Green (G) group 1
7Blue (B) group 1
8White (W) group 1
9Red (R) group 2
10 Green (G) group 2
11 Blue (B) group 2
12 White (W) group 2
13 Red (R) group 3
14 Green (G) group 3
15 Blue (B) group 3
16 White (W) group 3
17 Shutter
18 Focus
19 Function mode
20 Functional mode speed
21 Pan Fine
22 Tilt Fine
23 Rest(255)
24 Total (useless)
24 CH Mode
Moving Head 19x15W ZOOM •Art No P7100546

OSTRZEŻENIE!
UWAGA! Moving Head 19x15W ZOOM

 


UWAGA!         


UWAGA!           
Quick Half
Coupler - (Hak)
UWAGA!            

przez kilka sekund. Patrz rysunek 2 

WAŻNE! 

Rysunek 2. 

User Manual •Instrukcja Obsługi

2. ZASADY BEZPIECZENSTWA
3. INFORMACJE O PRODUKCIE
4. INSTALACJA
 Moving Head 19x15W ZOOM
 


przez wykwalifikowany personel, aby
  

    


    
    

   


     
 

     
  

    

    
w dobrze wentylowanym pomieszczeniu,
     

     
     



   
     
    

uszkodzenia spowodowane niestabilnym

    
      
   
     
    
   

    

Moving Head 19x15W ZOOM •Art No P7100546
















5.2 Specyfikacja zasilania

Napięcie Zasilania Pobór Mocy Częstotliwość zasilania
100~245V 300W 50/60Hz

    
przewodu z wtyczkami

5. POLACZENIA





1
3
22
ŻEŃSKI
XLR
GROUND
DMX +
DMX -
MĘSKI
XLR
3
1
    




UWAGA! 


wykwalifikowany personel techniczny.
    
    
     
  

DMX
Controller DMX 512 DMX 512
ŻEŃSKI
XLR
1
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45
User Manual •Instrukcja Obsługi

6. USTAWIENIA INTERFEJSU
Opcje Wyjaśnienie
Ustawienia
Interfejsu
DMX address
001-512 od statusu maszyny: odbierz
sygnał DMX z konsoli lub hosta
Naciśnij „ok” aby wejść w stan edycji.
W tym momencie wybieramy setki miejsc,
naciskamy „góra” i „dół”.
Klucz zmienia kod adresowy.
Kliknij „ok”, aby ponownie wybrać
dziesięciu redaktorów. Kliknij ponownie
„Określ” klawisz, aby wybrać indywidualną
edycję. Naciśnij ponownie status edycji
wyjścia.
Koder
Zacznij używać enkodera (sprzężenie
optyczne), aby ocenić brakujący krok i
automatycznie skoryguj pozycję
Zamknąć prawidłową pozycję bez
enkodera (odsprzęganie)
X inwersja Zamknięte/Otwarte
Y inwersja Zamknięte/Otwarte
Tryb pracy Tryb pracy DMX/voice control/automatic
Wybór programu 16CH/24CH
Ustawienia
wyświetlania Wybór języka Chinese, English
Ustawienia ekranu Zamknięcie
Konguracja
fabryczna
Kalibracja osi X 128
Kalibracja osi Y 128
Kalibracja ogniskowania 128
Czerwony 220
Zielony 220
Niebieski 220
Biały 220
Logo do wyboru 000
Moving Head 19x15W ZOOM •Art No P7100546

User Manual •Instrukcja Obsługi
Kanał Funkcja
1Pan
2Tilt
3Szybkość P/T
4Dimmer
5Czerwony (R) grupa 1
6Zielony (G) grupa 1
7Niebieski (B) grupa 1
8Biały (W) grupa 1
9Shutter
10 Focus
11 Tryb funkcji
12 Prędkość trybu funkcjonalnego
13 Pan Fine
14 Tilt Fine
15 Rest(255)
16 Razem (bezużyteczne)
7. KANAŁY DMX
Tryb 16 CH
Ustawienia

Channel Function
1Pan
2Tilt
3Szybkość P/T
4Dimmer
5Czerwony (R) grupa 1
6Zielony (G) grupa 1
7Niebieski (B) grupa 1
8Biały (W) grupa 1
9Czerwony (R) grupa 2
10 Zielony (G) grupa 2
11 Niebieski (B) grupa 2
12 Biały (W) grupa 2
13 Czerwony (R) grupa 3
14 Zielony (G) grupa 3
15 Niebieski (B) grupa 3
16 Biały (W) grupa 3
17 Shutter
18 Focus
19 Tryb funkcji
20 Prędkość trybu funkcjonalnego
21 Pan Fine
22 Tilt Fine
23 Rest(255)
24 Razem (bezużyteczne)
Tryb 24 CH
Moving Head 19x15W ZOOM •Art No P7100546

User Manual •Instrukcja Obsługi

Moving Head 19x15W ZOOM •Art No P7100546

www.flash-butrym.pl
F7100546