Flexispot GC02-BW-US User manual

● Avoid places exposed to direct sunlight and places with high temperatures, humidity
and dryness.
● Do not use on slippery floors.
● Do not use for any purpose other than its intended purpose.
● Regularly retighten the bolts and screws every 2 months.
● Do not use with loose bolts and screws.
● Do not climb on the seat surface. It may cause falls and accidents.
● Be careful not to get your hands or feet caught in the moving parts.
● To remove significant dirt, use a diluted neutral detergent.
● Please do not sit on the seat surface with excessive force. If you sit down vigorously, or
with a load of 3 to 4 times your weight the chair may be destroyed.
● Do not sit with more than one person at the same time.
● If even one of the parts including each adjustment bolt, screw, etc. is lost, damaged, or
worn out, do not use it until the repair with genuine parts is completed.
*If you do not use the product according to the above precautions, there is a danger of
causing a serious accidents or injuries.
Precautions
Model:
GC02-BW-US/GC02-BR-US/GC02-BW/GC02-BR
Instruction Manual
JAPAN
[e-mail]
Monday-Friday
10:00-18:00(TYO)
UNITED STATES
[e-mail]
Monday-Friday
9:00-17:00 (PST)

Gaming Chair
English: Pages 01 ~ 04
⽇本語: ページ 05 ~ 08

Parts Included
1 2 3
X1 X1 X1
4
X5
5 6 7
X5 X1 X1
Step 2
Backrest Seat Cushion Base Caste
Wheels Seat Plate
1
2
A
c X4
INSTALLATION
3
4
55
12
8
X1
9 10 11
X2 X1 X1
12
X1
A B C
X12 X6 X1
Armrest Headrets Lumbar Pillow
M8 Screw x20mm M5 Screw x8mm Rubber ring
D
X1
Hex Key
Step 1
Left-angel
Adjusters
Right-angel
Adjusters
Lift Cover
Push down the gas lift in the center of the base of the chair.
Screw the corresponding screws to the game chair seat cushion using a hex key.

Step 6
Step 4
Step 3
8
B
X4
X4
6
7
B
X2
Step 5
03 04
Step 7
9
X4
R
10
11
Using a hex key, screw the corresponding screws to the angle adjusters.
Screw in the corresponding screws to the game chair seat cushion with a hex key.
Assemble the seat of the chair by attaching the armrests to the base of the seat.
Using a hex key or a T-wrench, screw the armrests using the indicated screws, washers, and flat
gaskets in the photo.
Once the seat is completely assembled, push it down onto the completed base.
Congratulations!
You have assembled your gaming chair!
You can now put the accessories that you want.
Left Right

組み⽴て部品
1 2 3
X1 X1 X1
4
X5
5 6 7
X5 X1 X1
ステップ 2：背もたれに座部を取り付けます
背もたれ部 座部 レッグフレーム キャスター
ガスシリンダー 座⾯ブラケット
1
2
A
c X4
組み⽴てステップ
3
4
55
12
8
X1
9 10 11
X2 X1 X1
12
X1
A B C
X12 X6 X1
肘あて ヘッドレスト ランバーサポート
ボルトM8X20mm ボルトM5X8mm
D
X1
六⾓レンチ
ステップ 1：レッグフレーム部品の組み⽴て
05 06
カバー（左） カバー（右）
カバー
ワッシャー
脚部にキャスター、ガスシリンダーを取り付けます。
座⾯に背もたれを固定します。

ステップ 4：座⾯ブラケットを取り付けます
ステップ 3：背もたれ固定⽤パーツのカバーを取り付けます
8
B
X4
X4
6
7
B
X2
07 08
ステップ 6：ガスシリンダーに座⾯を差し込みます
9
X4
R
ステップ 5：座⾯ブラケットを取り付けます
ステップ 7：ベッドレストとランバーサポートを取り付けます
10
11
左側 右側