Flexispot Q8B-EU User manual

Work
like new
User Manual
Item No. Q8B-EU/Q8W-EU/Q8DB-EU
DESK FRAME AND TOP ARE SHIPPED SEPARATELY.

CONTENTS
English-------01
German------07
French-------13
Italian--------19
Spanish------25
warranty-----31

600-1240mm
Wooden block x1
①
⑨
②
③
⑤
④
⑥
⑧
⑦
⑩
3M glue x1
⑨
⑩

STEP 3: Connect cables
The left and right lifting column motors are connected to the handset, and the power cord is
connected to the other end of the adapter.
1
2
1
2
STEP 4: Install the wire cover
When finished, turn over the desk to power on and use it.
C
4x4
x1
2
1
One-sided
embedding
Note: If the installation is difficult, you can
use a 4x4 allen key to loosen the 4 screws.
Then insert screws and tighten them.
Press the
other side
STEP 5: Install the wireway assembly
Bx2
ST4.2x10
Self-Prepared 1
2
3
4
Note: If it is difficult to tighten with a
screwdriver, use a pistol drill.
Hang up
Swipe left into groove
STEP 6: Install the wooden block
When installing the monitor arm
Note: If you do not install the monitor stand, you can ignore this step.
You can choose a suitable installation
location according to your own preferences.
3M glue
Paste
STEP 7: Install the monitor arm
Note: If you do not install the monitor stand, you can ignore this step.
You can choose a suitable
installation location according
to your own preferences.