Flexispot S07MB User manual

Item No. S07MB/S07MW/S07LB/S07LW
Installation Guide
Warning
This product contains some small parts, if swallowed, there will be a risk of suffocation,
please keep it away from children.
● Before assembling, please read and understand this manual carefully. If you any
questions about the installation steps, please contact with the professional installer or
customer service.
● Prepare tools (electric screwdriver, etc.) necessary for assembly, at least two people
to complete the installation.
Note: Use this product indoor only.

(x4 )
M5x10mm
B.
Package Included
(A) Parts Included
(B) Attachment Screw Set
12
Drawer (1 PC)
Installation Steps
STEP 1
Set the drawer under your desk, approximately even with the front edge, to assess its placement before
attaching it.
Note:
You may perform this step yourself during desk assembly and it is inverted or upside down. If your desk
is already upright, ask someone for some help.
STEP 2
Make pilot holes in the desk with a drill. Hold one screw up close to the edge of the desk before
inserting it. Ensure that it is not too long and that you do not drill too much into the desk. Have
someone hold the drawer in place while you insert four screws (B) into the pilot holes and twist
them all the way down.
01 02
A
B
4 PCS
A
1 PC