Flexispot 1388 User manual

ERGONOMIC MESH CHAIR 1388
ASSEMBLY GUIDE

Chair Parts
for arms
for seat plate for backrest for headrest

C
C
B
D
E
F
G
H
A
I
I
F
G
H
D
for arms
A
B
C
D
E
F
G
H
I

E
B
B
for headrest
for backrest
for seat plate
E

How to use
To Adjust Seat Height
While seated, reach the right side of the chair to find the handle.
Lift and raise your body up slightly to allow the chair to rise to the
desired height.
To lower the seat, lift the handle while applying more weight
downward on the seat. The chair will descend until the handle is
released or the chair reaches the bottom position.
To Adjust Variable Position Tilt Lock
Pull up on the handle located underneath the left side of the seat.
Adjust the back to your desired angel, then push the handle down
to lock the back into position. If you want to come back, do the
same process.
To Adjust Headrest: Height & Angle
The headrest rotates forward and back by 15 degrees.Hold the
headrest and rotate forward or back to desired angle.The
headrest raises and lowers hold the back of the chair and lift
the headrest up to raise; push down to lower.
To Adjust Tension on the Tilt
Reach under the front center of the chair, grasp the round knob
and turn it counter-clockwise to stiffen the tilt mechanism. Turn
the knob clockwise to loosen the tilt mechanism. Rotate the
knob until the desired resistance is reached.
To Adjust Arm Height
Press the buttons on the chair arms to allow the arms to
move up or down freely.Release the buttons once the
desired height is reached.