FLIR MR77 User manual

User’s manual
FLIR MR77
Pinless moisture psychrometer with infrared
thermometer and Bluetooth METERLiNK®
netzerotools.com
netzerotools.com
netzerotools.com
Flir MR77 Pinless Moisture Meter Pyschrometer

netzerotools.com
netzerotools.com

User’s manual
FLIR MR77
#T559822; r. AE/ 10036/10036; en-US
netzerotools.com
netzerotools.com

netzerotools.com
netzerotools.com

Table of contents
1 Disclaimers. . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . 1
1.1 Copyright. . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. 1
1.2 Quality assurance . . . . . . . . .. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. 1
1.3 Documentation updates . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . 1
1.4 Disposal of electronic waste. . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. 1
2 Safety information . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . 2
2.1 FCC Compliance . . . . . . . . . .. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. 2
2.2 Industry Canada compliance. . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . 3
3 Introduction . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . 5
3.1 Key features.. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . 5
4 Description . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . 6
4.1 Meter description . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . 6
4.2 Function buttons . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . 8
4.3 Display description . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 9
4.4 Status icons and indicators. . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . 9
5 Operation . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . .12
5.1 Powering the meter . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . .12
5.2 Moisture measurements. . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . .12
5.3 Hygrometric measurements. . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . .14
5.4 IR temperature measurements. . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .15
5.5 Condensation measurements. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . .16
5.6 Vapor pressure measurements . . . . . . . . .. . . . . . . . . . . . . . . . . .. . .17
5.7 Selecting measurement units . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . .18
5.8 Storing and recalling measurements. . . . . . . . . . .. . . . . . . . . . . . . .18
5.9 Alarm settings. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . .19
5.10 Locked mode . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . .20
5.11 Streaming measurement data using Bluetooth . . . . . . . . . . . . . .21
6 Maintenance. . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . .22
6.1 Cleaning and storage. . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . .22
6.2 Battery replacement . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .22
7 Material groups . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . .23
8 Technical specifications . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . .41
8.1 General specifications. . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . .41
8.2 Humidity meter specifications . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . .42
#T559822; r. AE/ 10036/10036; en-US v
netzerotools.com
netzerotools.com

Table of contents
8.3 Moisture specifications . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .42
8.4 Thermal measurement range specifications. . . . . . . . . . . . . . . . .43
8.5 Vapor pressure specifications . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . .43
8.6 Dew Point Temperature specifications . . . . . . . . .. . . . . . . . . . . . . .43
8.7 Mixing Ratio specifications . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . .43
9 Technical support . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .44
10 Warranties . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . .45
10.1 FLIR Global Limited Lifetime Warranty . . . . . . . . . . . .. . . . . . . . . .45
10.2 FLIR Test and Measurement Limited 2 Year
Warranty. . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . 46
#T559822; r. AE/ 10036/10036; en-US vi
netzerotools.com
netzerotools.com

1 Disclaimers
1.1 Copyright
© 2013, FLIR Systems, Inc. All rights reserved worldwide.
No parts of the software including source code may be re-
produced, transmitted, transcribed or translated into any
language or computer language in any form or by any
means, electronic, magnetic, optical, manual or otherwise,
without the prior written permission of FLIR Systems.
The documentation must not, in whole or part, be copied,
photocopied, reproduced, translated or transmitted to any
electronic medium or machine readable form without prior
consent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are
either registered trademarks or trademarks of FLIR Sys-
tems and/or its subsidiaries. All other trademarks, trade
names or company names referenced herein are used for
identification only and are the property of their respective
owners.
1.2 Quality assurance
The Quality Management System under which these
products are developed and manufactured has been certi-
fied in accordance with the ISO 9001 standard.
FLIR Systems is committed to a policy of continuous de-
velopment; therefore we reserve the right to make
changes and improvements on any of the products with-
out prior notice.
1.3 Documentation updates
Our manuals are updated several times per year, and we
also issue product-critical notifications of changes on a
regular basis.
It only takes a few minutes to register online. In the down-
load area you will also find the latest releases of manuals
for our other products, as well as manuals for our historical
and obsolete products.
1.4 Disposal of electronic waste
As with most electronic products, this equipment must be
disposed of in an environmentally friendly way, and in ac-
cordance with existing regulations for electronic waste.
Please contact your FLIR Systems representative for
more details.
#T559822; r. AE/ 10036/10036; en-US 1
netzerotools.com
netzerotools.com

2 Safety information
Note
Before operating the device, you must read, understand, and follow all in-
structions, dangers, warnings, cautions, and notes.
Note
FLIR Systems reserves the right to discontinue models, parts or accessories,
and other items, or to change specifications at any time without prior notice.
WARNING
Do not look directly into the laser beam. The laser beam can cause eye
irritation.
WARNING
Do not use the laser pointer near explosive gases or in other possible explo-
sive areas. Injury to persons can occur.
This symbol, adjacent to another symbol or terminal, indicates that
the user must refer to the manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal
use, hazardous voltages may be present.
Double insulation.
2.1 FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
#T559822; r. AE/ 10036/10036; en-US 2
netzerotools.com
netzerotools.com

2 Safety information
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to cor-
rect the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Exposure to Radio Frequency Radiation.
To comply with FCC/IC RF exposure compliance requirements, a separation
distance of at least 20 cm must be maintained between the antenna of this de-
vice and all persons. This device must not be co-located or operating in con-
junction with any other antenna or transmitter.
WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
2.2 Industry Canada compliance
This device complies with Industry Canada licence-exempt RSS standard(s). Op-
eration is subject to the following two conditions: (1) this device may not cause in-
terference, and (2) this devicemust accept any interference, including
interference that may cause undesired operation of thedevice.
#T559822; r. AE/ 10036/10036; en-US 3
netzerotools.com
netzerotools.com

2 Safety information
CAUTION
Exposure to Radio Frequency Radiation.
To comply with RSS 102 RF exposure compliance requirements, for mobile
configurations, a separation distance of at least 20 cm must be maintained be-
tween the antenna of this device and all persons. This device must not be co-
located or operating in conjunction with any other antenna or transmitter.
#T559822; r. AE/ 10036/10036; en-US 4
netzerotools.com
netzerotools.com

3 Introduction
Congratulations on your purchase of the FLIR MR77 with METERLiNK® Blue-
tooth capabilities for use with FLIR infrared (IR) cameras.
This pinless moisture meter incorporates a patented built-in IR thermometer and
20-point memory. You can monitor moisture in wood and other building materials
with no surface damage with the pinless moisture sensor (pin-type moisture
probe included), and measure humidity and air temperature with the built-in
probe, plus non-contact IR temperature using its patented IR design. Advanced
functions provide moisture content, dew point, and vapor pressure calculations.
This meter is shipped fully tested and calibrated and, with proper use, will provide
years of reliable service.
3.1 Key features
• Quickly indicates the moisture content of materials with pinless technology
without damaging the surface.
• Optional remote pin-type probe (MR77-P) allows for moisture readings at dif-
ferent penetration levels (0.9 m (3′) cable length).
• Easy to read, large dual display with backlight feature.
• Simultaneously displays the percentage moisture content of wood or material
being tested and the air temperature, IR temperature, or humidity.
• Uses a patented IR design to measure non-contact surface temperature, with
an 8:1 distance-to-spot ratio and 0.95 fixed emissivity.
• Built-in humidity/temperature probe measures relative humidity and air tem-
perature plus the mixing ratio and the dew point.
• Measures ambient and surface vapor pressure.
• Automatically calculates the differential temperature.
• Minimum/maximum and data hold modes.
• 20-point internal memory.
• Auto power off and low battery indication.
#T559822; r. AE/ 10036/10036; en-US 5
netzerotools.com
netzerotools.com

4 Description
4.1 Meter description
Figure 4.1 Front view
1. IR sensor.
2. Laser pointer diode.
3. Humidity sensor and thermometer.
Note
Protect the sensor with the protective cap when not in use.
#T559822; r. AE/ 10036/10036; en-US 6
netzerotools.com
netzerotools.com

4 Description
4. LCD display.
5. Function buttons, see section 4.2 Function buttons, page 8.
6. External pin probe connection jack (RJ45).
Figure 4.2 Rear view
1. Internal moisture sensor.
2. Battery compartment.
#T559822; r. AE/ 10036/10036; en-US 7
netzerotools.com
netzerotools.com

4 Description
4.2 Function buttons
• Press the button to enter Hygrometer mode, see section 5.3
Hygrometric measurements, page 14.
• Press the button repeatedly to cycle through the display of rel-
ative humidity, dew point temperature, and mix ratio.
• Press and hold the button for 2 seconds to enter Humidity
alarm set mode, see section 5.9 Alarm settings, page 19.
• Press the button to enter Condensation mode, see section
5.5 Condensation measurements, page 16.
• Press the button repeatedly to toggle between Condensation
mode and Vapor pressure mode, see section 5.6 Vapor pres-
sure measurements, page 17.
• When in Moisture mode, press and hold the button for 2 sec-
onds to toggle between the relative and absolute readings,
see section 5.2 Moisture measurements, page 12.
• Press the button to enter Moisture mode, see section 5.2
Moisture measurements, page 12.
• Press the button repeatedly to toggle between the internal
sensor and external pin probe measurements.
• Press and hold the button for 2 seconds to enter Moisture
alarm set mode, see section 5.9 Alarm settings, page 19.
Press the button to enable/disable the display backlight.
• Press the button to toggle between Normal and Hold mode. In
Hold mode, the display freezes the last reading and continues
to display this value.
• Press and hold the button for 5 seconds to toggle between
Normal and Locked mode, see section 5.10 Locked mode,
page 20.
Press and hold the button to enable IR temperature measure-
ments, see section 5.4 IR temperature measurements, page 15.
#T559822; r. AE/ 10036/10036; en-US 8
netzerotools.com
netzerotools.com

4 Description
• Press and hold the button for 2 seconds to change the unit
setting. For more information, see section 5.7 Selecting meas-
urement units, page 18.
• When in View data mode, press the button to step through the
datalogger memory locations.
When in View data mode, press the button to step through the
datalogger memory locations.
Press the button to capture and store the current readings. For
more information, see section 5.8 Storing and recalling measure-
ments, page 18.
Press the button to switch the meter on/off.
4.3 Display description
1. Main display.
2. Secondary display.
3. Bar graph (matches the reading on the main display).
4.4 Status icons and indicators
Indicates that METERLiNK® (Bluetooth) communication is ac-
tive, see section 5.11 Streaming measurement data using Blue-
tooth, page 21.
Indicates that the IR sensor and the laser pointer diode are active.
#T559822; r. AE/ 10036/10036; en-US 9
netzerotools.com
netzerotools.com

4 Description
Indicates that the meter is displaying relative moisture measure-
ments (solid indicator) or absolute moisture measurements
(flashing indicator).
Indicates that the meter is in Hold mode.
Indicates that the reading is lower than the Low alarm threshold.
Indicates that the reading is higher than the High alarm threshold.
Indicates that the meter is in Locked mode.
Indicates that the internal moisture sensor is active.
Indicates that the external pin probe is active.
Indicates the battery voltage status.
Indicates that the auto power off function is enabled.
Indicates the active datalogger memory location (1–20).
Indicates that the meter is in Hygrometer mode.
Indicates that the meter is displaying dew point temperature read-
ings on the main display.
Indicates that the meter is in Condensation mode.
Indicates that the meter is in Moisture mode.
Indicates the number that represents the material group under
test, see section 7 Material groups, page 23.
Indicates that the meter is displaying vapor pressure in millibar
(mBar) or in kilopascal (kPa) units.
Indicates that the meter is displaying the mixing ratio in grains per
pound (GPP) or in grams per kilogram (g/kg) units.
#T559822; r. AE/ 10036/10036; en-US 10
netzerotools.com
netzerotools.com

4 Description
Indicates that the meter is displaying relative humidity in percent
(%) units.
Indicates that the meter is displaying temperature in degrees Cel-
sius (℃) units.
Indicates that the meter is displaying temperature in degrees Fah-
renheit (℉) units.
High/low calibration point.
#T559822; r. AE/ 10036/10036; en-US 11
netzerotools.com
netzerotools.com

5 Operation
5.1 Powering the meter
1. Remove the protective cap from the humidity sensor/thermometer assembly.
2. Press the
button to switch on the meter.
3. If the battery indicator shows that the battery voltage is low or if the me-
ter does not power on, replace the battery. See section 6.2 Battery replace-
ment, page 22.
4. Press the button to switch off the meter.
5.1.1 Auto power off
The meter enters sleep mode after 30 minutes of inactivity. The meter beeps
three times 20 seconds before powering off. Press any function button to prevent
the meter from powering off. The auto power off time-out is then reset.
5.1.1.1 Disable auto power off
1. To disable the auto power off function, start with the meter switched off.
2. Simultaneously press and hold the and buttons until the in-
dicator disappears, indicating that the function is disabled.
5.2 Moisture measurements
With the meter in Moisture mode, moisture measurements can be performed us-
ing either the internal moisture sensor or by connecting the external pin probe.
The internal moisture sensor can detect moisture to a depth of 19 mm (0.75″).
The internal moisture reading can be relative or absolute.
The three-digit main display shows the moisture reading, and the four-digit sec-
ondary display shows the ambient air temperature. The bar graph matches the
reading on the main display.
While in Moisture mode, IR measurements may also be performed, see section
5.4 IR temperature measurements, page 15.
#T559822; r. AE/ 10036/10036; en-US 12
netzerotools.com
netzerotools.com

5 Operation
5.2.1 Internal moisture sensor
1. Press the
button to enter the Moisture mode.
The and indicators are displayed. The indicator is also dis-
played, indicating that the meter is displaying relative measurements. The
ambient temperature is displayed on the secondary display.
2. Place the internal moisture sensor (located on the rear side of the meter) on
the surface of the material to be tested.
The relative moisture reading is displayed on the main display. No units of
measurement are displayed.
3. Absolute or Zero Mode measurements. This mode allows measurements to
be displayed as a difference between the actual reading and a stored refer-
ence reading. Follow the steps below.
1. For best results, keep hands and other surfaces and objects away from
the internal moisture sensor area when turning on the unit.
2. Place the internal moisture sensor on the surface that will be the "refer-
ence" surface. Press and hold the button for 2 seconds until the
indicator flashes. This will zero the meter at the reference value.
3. Place the internal moisture sensor on the surface of the material to be
tested. The measurement will be read as the offset value of your stored
reference.
4. Press and hold the button for 2 seconds to return to normal inter-
nal moisture measurement mode.
5.2.2 External pin probe
1. Connect the external pin probe to the EXT connection jack (located at the
bottom of the meter).
2. Press the button to enter the Moisture mode. The indicator is
displayed.
3. Press the button once more to activate external pin probe measure-
ments. The indicator is displayed.
#T559822; r. AE/ 10036/10036; en-US 13
netzerotools.com
netzerotools.com

5 Operation
4. The
indicator shows the currently selected material group number. Refer
to section 7 Material groups, page 23.
To change the material group number, do the following:
1. Press and hold the and buttons for 2 seconds to enter the Ma-
terial group selection mode.
The indicator flashes.
2. Use the and buttons to step through the nine material group
numbers.
3. Press the button to set the group and exit the Material group se-
lection mode.
5. Press the probe pins into the material.
The moisture reading is displayed on the main display, in percent (%).
5.3 Hygrometric measurements
In Hygrometer mode, the meter measures and displays the relative humidity, dew
point temperature, mixing ratio, and ambient air temperature.
The three-digit main display shows the relative humidity, dew point temperature,
or mixing ratio, and the four-digit secondary display shows the ambient air tem-
perature. The bar graph matches the reading on the main display.
While in Hygrometer mode, IR measurements may also be performed, see sec-
tion 5.4 IR temperature measurements, page 15.
1. Press the button to enter Hygrometer mode. The indicator is
displayed.
2. The relative humidity is displayed on the main display. The ambient air tem-
perature is displayed on the secondary display.
#T559822; r. AE/ 10036/10036; en-US 14
netzerotools.com
netzerotools.com