FLOS TOIO F7600030 User manual

REV. 2
DATE 25/11/2021
1
TOIO
Designed by Achille and Pier Giacomo Castiglioni, 1962
F7600030
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF02774
–Nickel-plated brass little cage
02. RF04607
–Electric wiring transformer to bulb
03. RF02775
–Rod
04. RF02580
–Black base
05. RF17929
–Autotransformer direct
06. RF05784
–Fuse holder
09. RF7600100
–Wires loop assembly
10. RF06730
–Cable winder support
11. RF06732
–Nickel tap grip
12. RF19850
–Electrical wiring assembly with dimmer
13. RF24160
–Rondò dimmer
TOIO
F7600030
REV. 2
DATE 25/11/2021

EN
3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF02774
NICKEL-PLATED BRASS CAGE
REV. 2
DATE 25/11/2021
TOIO F7600030
Toio
p.03 Toio Led
p.03

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Fig.2
RF02774
NICKEL-PLATED BRASS CAGE
Unfasten the screw (E) and free the damaged
bulb cage (A) from the rod (B).
Assemble now the new spare-part:
Place the lamp bulb cage (A) on the rod (B),
ensuring that the insert (C) present on the
cage (A) hooks inside the opening (D) of the
rod (B).
Lock the cage (A) to the rod (B) by fastening
the screw (E).
REV. 2
DATE 25/11/2021
TOIO F7600030
E
B
A
D
C

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.3
Insert the connector (F) inside the fitting of the lamp-bulb (G).
RF02774
NICKEL-PLATED BRASS CAGE
REV. 2
DATE 25/11/2021
TOIO F7600030
G
F

EN
6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
REV. 2
DATE 25/11/2021
TOIO F7600030
Toio
p.06 Toio Led
p.06

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Insert the connector (D) inside the fitting of the lamp-bulb (C).
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
REV. 2
DATE 25/11/2021
TOIO F7600030
C
D

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.2
E
Pass the electrical cable through the cable loops (E).
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
REV. 2
DATE 25/11/2021
TOIO F7600030

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.3
E
Connect the plug (F) to the socket (G) of the transformer.
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
E
REV. 2
DATE 25/11/2021
TOIO F7600030

10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.4
H
Wrap the excess cable around the cable winding support (H).
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
REV. 2
DATE 25/11/2021
TOIO F7600030

EN
11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF02775
ROD
REV. 2
DATE 25/11/2021
TOIO F7600030
Toio
p.11 Toio Led
p.11

12
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
B
Insert the rod (B) in the lamp base by unfasten the knob (A).
A
RF02775
ROD
REV. 2
DATE 25/11/2021
TOIO F7600030

13
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.2
Insert through the rod (B) all the black heat shrink tubes (D).
Collocate the loops (F) between the heat shrink tubes (D) and shrink
the tubes (D) by utilizing a heat gun.
REMARK!!!
Position the loops (F) facing the left hand side of the rod
(B). The loops must stay on the side where present the knob and cable
winder (G).
RF02775
ROD
REV. 2
DATE 25/11/2021
TOIO F7600030
B
F
D
G
7 cm 10 cm

14
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.3
Fig.4
Place the lamp bulb cage (A) on the rod (B),
ensuring that the insert (H) present on the
cage (A) hooks inside the opening (I) of the
rod (B).
REV. 2
DATE 25/11/2021
RF02775
ROD
TOIO F7600030
A
B
IH

15
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.5
Fig.6
Lock the cage (A) to the rod (B) by fastening
the
screw (C).
Insert the connector (K) inside the fitting of
the lamp-bulb (J).
J
K
REV. 2
DATE 25/11/2021
RF02775
ROD
TOIO F7600030
B
E
A

16
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.7
F
Pass the electrical cable through the cable loops (F).
REV. 2
DATE 25/11/2021
RF02775
ROD
TOIO F7600030

17
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.8
Adjust the height of the rod (B) and then fasten the knob (A).
Wrap the excess cable around the cable winding support (H).
B
AH
REV. 2
DATE 25/11/2021
RF02775
ROD
TOIO F7600030

EN
18
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF02580
LAMP BASE
REV. 2
DATE 25/11/2021
TOIO F7600030
Toio
p.18
Toio Led
p.18

EN
19
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF17929
TRANSFORMER
REV. 2
DATE 25/11/2021
TOIO F7600030

20
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
L
Disconnect the power supply plug (I) from the transformer socket (L).
I
RF17929
TRANSFORMER
REV. 2
DATE 25/11/2021
TOIO F7600030