FLOS TOIO LED F7630009 User manual

REV. 1
DATE 01/07/2021
1
TOIO LED
Designed by Achille and Pier Giacomo Castiglioni, 1962
F7630009
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF02774 –Nickel-platte brass little cage
02. RF04607 –Electric wiring transformer to bulb
03. RF02775 –Stem
04. RF02579 –White base
05. RF7600200 –Autotransformer direct
06. RF05784 –Fuse holder
07. RF7600100 –Wires loop assembly
08. 06730 –Cable winder support
09. 06732 –Nickel tap grip
10. RF19850 –Electrical wiring assembly with dimmer
11. RF28045 –Rondò dimmer
TOIO LED
F7630009
REV. 1
DATE 01/07/2021

EN
3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF02774
NICKEL-PLATED BRASS CAGE
TOIO LED F7630009
REV. 1
DATE 01/07/2021

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Fig.2
RF02774
NICKEL-PLATED BRASS CAGE
Unfasten the screw (E) and free the damaged bulb
cage (A) from the rod (B).
Assemble now the new spare-part:
Place the lamp bulb cage (A) on the rod (B),
ensuring that the insert (C) present on the cage (A)
hooks inside the opening (D) of the rod (B).
Lock the cage (A) to the rod (B) by fastening the
screw (E).
REV. 1
DATE 01/07/2021
TOIO LED F7630009

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.3
G
Insert the connector (F) inside the fitting of the lamp-bulb (G).
F
RF02774
NICKEL-PLATED BRASS CAGE
REV. 1
DATE 01/07/2021
TOIO LED F7630009

EN
6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
REV. 1
DATE 01/07/2021
TOIO LED F7630009

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
C
Insert the connector (D) inside the fitting of the lamp-bulb (C).
D
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
REV. 1
DATE 01/07/2021
TOIO LED F7630009

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.2
E
Pass the electrical cable through the cable loops (E).
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
REV. 1
DATE 01/07/2021
TOIO LED F7630009

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.3
E
Connect the plug (F) to the socket (G) of the transformer.
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
E
REV. 1
DATE 01/07/2021
TOIO LED F7630009

10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.4
H
Wrap the excess cable around the cable winding support (H).
RF04607
ELECTRICAL WIRING FROM TRANSFORMER TO BULB
REV. 1
DATE 01/07/2021
TOIO LED F7630009

EN
11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF02775
ROD
REV. 1
DATE 01/07/2021
TOIO LED F7630009

12
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
B
Insert the rod (B) in the lamp base by unfasten the knob (A).
A
RF02775
ROD
REV. 1
DATE 01/07/2021
TOIO LED F7630009

13
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.2
Insert through the rod (B) all the black heat shrink tubes (D).
Collocate the loops (F) between the heat shrink tubes (D) and shrink the tubes
(D) by utilizing a heat gun.
REMARK!!! Position the loops (F) facing the left hand side of the rod (B). The
loops must stay on the side where present the knob and cable winder (G).
RF02775
ROD
REV. 1
DATE 01/07/2021
TOIO LED F7630009

14
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.3
Fig.4
Place the lamp bulb cage (A) on the rod (B),
ensuring that the insert (H) present on the cage (A)
hooks inside the opening (I) of the rod (B).
REV. 1
DATE 01/07/2021
RF02775
ROD
TOIO LED F7630009

15
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.5
Fig.6
Lock the cage (A) to the rod (B) by fastening the
screw (C).
Insert the connector (K) inside the fitting of the
lamp-bulb (J).
J
K
REV. 1
DATE 01/07/2021
RF02775
ROD
TOIO LED F7630009

16
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.7
F
Pass the electrical cable through the cable loops (F).
REV. 1
DATE 01/07/2021
RF02775
ROD
TOIO LED F7630009

17
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.8
Adjust the height of the rod (B) and then fasten the knob (A).
Wrap the excess cable around the cable winding support (H).
B
AH
REV. 1
DATE 01/07/2021
RF02775
ROD
TOIO LED F7630009

EN
18
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF02579
LAMP BASE
REV. 1
DATE 01/07/2021
TOIO LED F7630009

EN
19
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF7600200
TRANSFORMER
REV. 1
DATE 01/07/2021
TOIO LED F7630009

20
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
L
Disconnect the power supply plug (I) from the transformer socket (L).
I
RF7600200
TRANSFORMER
REV. 1
DATE 01/07/2021
TOIO LED F7630009