Fluke 1520 User manual

Fluke 1520
MegOhmMeter
Technical Data
•Large, backlit LCD with
analog bar graph and digital
display
•Three output voltages for
insulation resistance testing:
250V, 500V, 1000V
•Insulation resistance testing
up to 4000 MΩ; switches
automatically to voltage
measurement when voltage
is greater than 30V ac or
30V dc.
•AC/DC voltage measurement
up to 600V
•Lo-Ohms function for testing
connections
•Last reading memory display
•4 C-cell batteries for up to
5,000 tests per EN61557-2,
with battery-life indicator
and auto shut-off.
•Autodischarge of capacitive
voltage charges
•Heavy duty test leads,
alligator clips and test
probes
•Rugged, splash-proof case
with impact-absorbing
holster
•3 year warranty
Specifications
Function Range Accuracy Resolution
Insulation Resistance
Auto ranges 4.000 MΩ, 40.00 MΩ, To 100 MΩ: 2% + 2 counts 0.001MΩto 10 MΩ
400.0 MΩ, 4000 MΩOver 100 MΩ: 10% + 2 counts +1%/GΩ
Test voltages 250V, 500V, 1000V +20%, -0%
Max measurement current 1 mA
Audible/visible voltage warning ≥30V ac or dc
Lo-Ohms
Resistance O to 40.00Ω2% + 2 counts 0.01Ω
Analog bar graph 0 to 100Ω
Audible/visible voltage warning ≥30V ac or dc
Resistance
Resistance 4 k Ω2% + 2 counts 1Ω
Analog bar graph 0 to 10kΩ
Voltage
Voltage 0 to 600V ac (50/60 Hz) 2% + 2 counts 1V
0 to 600V dc
The Fluke 1520 MegOhmMeter is a
handy insulation resistance tester that
also measures voltage and checks
connections with its Lo-Ohms function.
600V
CAT III
Designed and
Conforms to
IEC 61010-1
R
LISTED
950Z

Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa (31 40) 2 678 200 or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com/
©2000 Fluke Corporation. All rights reserved.
Trademarks are the property of their respective owners.
Printed in U.S.A. 6/2000 1273840 D-ENG-N Rev A
Printed on recycled paper.
Fluke.Keeping your world
up and running.
Safety Specifications
Electrical safety
Meets IEC 1010-1 and EN 61557
Protection class
Pollution degree II
Overvoltage category
IEC 1010-1 CAT III 600V
Agency Approvals
UL, CSA, VDE (pending)
Environmental
Specifications
Operating Temperature
-10°C to +50°C
Storage Temperature
-40°C to +70°C
Humidity
(Without Condensation)
75% RH (40°C)
Dust/water resistance
IP42 per IEC 529
Operating Altitude
2,500 meters
Mechanical & General
Specifications
Battery Check Function
Indicates remaining percent of
charge
Size 241 x 108 x 72mm
(9.5 x 4.25 x 2.85 inches)
Weight 1.1 kg (2.5 lbs)
Batteries 4 C size 1.5V alkaline
Warranty 3 years
Ordering Information
Fluke 1520 MegOhmMeter
Included Accessories
•Fluke 1520 MegOhmMeter
•TL27 Heavy Duty Test Leads
(1 Red and 1 Black)
•TP74 Lantern Tip Test
Probes (1 Red and 1 Black)
•AC86 Large Jaw Alligator
Clips (1 Red and 1 Black)
•Protective holster with
hand strap
•Carrying case with
accessory storage
•Four C-cell alkaline
batteries, installed
•Instruction manual
•Instruction manual on
CD-ROM
Optional Accessories
•SH 100 Shoulder Strap
•TPAK Strap and Magnet for
hanging the Fluke 1520
Optional SH 100 Shoulder Strap
Optional TPAK Meter Strap
and Magnet Hanging Kit
Official Fluke Power Quality Distributor
Optimum Energy Products Ltd.
#333, 11979 - 40th Street S.E.
Calgary, AB Canada T2Z 4M3
For More Information Call
Toll Free 877-766-5412
Main 403-256-3636
Fax [phone]
www.MyFlukeStore.com
[email protected]