Fluke CertiFiber User manual

CertiFiber™
All manuals and user guides at all-guides.com

CERTIFIBER
TM
7IAH /KE@A
PN 1886280 (English) April 2002, 4/02
© 2002 Fluke Networks, nc. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
All manuals and user guides at all-guides.com

LIMITED WARRANTY AND LIMITATION
OF LIABILITY
Fluke Networks, nc. (Fluke Networks) warrants its
products to be free from defects in material and
workmanship under normal use and service for one (1)
year, beginning on the date of shipment. Link interface
adapters (L As), parts, product repairs, and services are
warranted for 90 days. This warranty extends only to
the original buyer or end-user customer of a Fluke
Networks authorized reseller, and does not apply to
fuses, disposable batteries, or to any product which, in
Fluke Networks opinion, has been misused, altered,
neglected, contaminated, or damaged by accident or
abnormal conditions of operation or handling. Fluke
Networks warrants that software will operate substan-
tially in accordance with its functional specifications for
90 days and that it has been properly recorded on non-
defective media. Fluke Networks does not warrant that
software will be error free or operate without interrup-
tion.
Fluke Networks authorized resellers shall extend this
warranty on new and unused products to end-user
customers only but have no authority to extend a
greater or different warranty on behalf of Fluke
Networks.
Fluke Networks warranty obligation is limited, at Fluke
Networks option, to refund of the purchase price, free
of charge repair, or replacement of a defective product
which is returned to a Fluke Networks authorized
service center within the warranty period.
To obtain warranty service, contact your nearest Fluke
Networks authorized service center to obtain return
authorization information. Following warranty repair,
the product will be returned to Buyer, transportation
prepaid (FOB Destination). f Fluke Networks deter-
mines that the failure was caused by misuse, alteration,
accident, or abnormal condition of operation or
handling, Fluke Networks will provide an estimate of
repair costs and obtain authorization before commenc-
ing the work. Following repair, the product will be
returned to the Buyer, transportation prepaid, and the
Buyer will be billed for the repair and return transpor-
tation charges (FOB Shipping Point).
All manuals and user guides at all-guides.com

Warranty service is available outside the United States
only if product was purchased through a Fluke
Networks Authorized Sales Outlet in the country of use
or the applicable Fluke Networks international price
was paid. Product transported from the United States
for which the applicable Fluke Networks international
price was not paid must be returned to the U.S. to
receive warranty service, at the shipment expense and
risk of Buyer. Fluke Networks reserves the right to
invoice Buyer for importation costs of repair/replace-
ment parts when product purchased in one country is
submitted for repair in another country.
TH S WARRANTY S BUYERS SOLE AND EXCLUS VE
REMEDY AND S N L EU OF ALL OTHER WARRANT ES,
EXPRESS OR MPL ED, NCLUD NG BUT NOT L M TED TO
ANY MPL ED WARRANTY OF MERCHANTAB L TY OR
F TNESS FOR A PART CULAR PURPOSE. FLUKE NET-
WORKS SHALL NOT BE L ABLE FOR ANY SPEC AL,
ND RECT, NC DENTAL, OR CONSEQUENT AL DAMAGES
OR LOSSES, NCLUD NG LOSS OF DATA, WHETHER
AR S NG FROM BREACH OF WARRANTY OR BASED ON
CONTRACT, TORT, REL ANCE, OR ANY OTHER THEORY.
Since some countries or states do not allow limitation of
the term of an implied warranty, or exclusion or
limitation of incidental or consequential damages, the
limitations and exclusions of this warranty may not
apply to every buyer. f any provision of this Warranty is
held invalid or unenforceable by a court or other
decision-maker of competent jurisdiction, such holding
will not affect the validity or enforceability of any other
provision.
Fluke Networks, nc.
P.O. Box 777
Everett, WA 98206-0777
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
6/01
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 1
A guide to using the CERTIFIBER to install,
manage, and troubleshoot multimode iber
cabling systems.
CERTIFIBER is the astest dual iber test equip-
ment to certi y installed links at both wave-
lengths, 850 and 1300nm. It veri ies against
TIA and ISO standards, as well as other iber
network application requirements.
CERTIFIBER measures length, propagation delay,
and power loss o multimode iber optic
cabling.
CERTIFIBERTM
User Guide
ENGLISH
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 2
Contents
Chapter 1 - Introduction ......................... 6
The Complete Fiber Solution .................................. 6
Standard Features .................................................... 7
Graphical User Inter ace .......................................... 8
CertiFibers Keypad .................................................. 8
CertiFiber remote .................................................. 10
LED Indicators ..................................................... 10
The Keypad ......................................................... 11
Battery .................................................................... 12
Battery Check ..................................................... 12
Connector Adapters .............................................. 13
Technical Support .................................................. 13
Product Versions .................................................... 14
Editing with CertiFiber .......................................... 14
Getting Started ................................ 16
Display Contrast ..................................................... 17
Calibrating CertiFiber ............................................ 17
Chapter 2 - Setup ................................... 19
Autotest ................................................................. 19
Editing Autotests ............................................... 20
Test Mode ............................................................... 21
Job Names .............................................................. 22
Meters/Feet ............................................................ 23
Time/Date ............................................................... 23
Owner Name .......................................................... 24
Fiber GRI ................................................................. 25
Language ............................................................... 26
Upload to PC .......................................................... 27
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 3
Chapter 3 - Automatic Measurements . 29
Setting the Re erence ............................................ 29
Setting the Re erence or Loopback Mode ...... 31
Autotest ................................................................. 31
Autotest Results ................................................. 34
Saving an Autotest ............................................. 35
Viewing Autotest Results................................... 37
Loopback Autotest ............................................. 39
Results .................................................................... 40
Deleting Autotests ................................................. 41
Uploading to a PC .................................................. 42
Printing Test Results .............................................. 43
Sample Autotest Certi ication Report .................. 43
Chapter 4 - Manual Measurements ...... 45
Power Loss .............................................................. 45
Loopback ................................................................ 46
Source Mode .......................................................... 46
Remote Light Source ............................................. 47
Appendix - A Technical Speci ications .. 49
CertiFiber ................................................................ 49
CertiFiber remote .................................................. 50
Appendix - B PASS/FAIL Criteria ........... 51
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 4
F1 and F2
Functions
vary
depending
onthescreen
currently
displayed.
CERTIFIBER adapter ports
Receive 2 Transmit 1
Escapeexitsthe current
displayorfunction.
Shift+ Escapeopens
the SETUP screen.
Arrow Keys
allownavigation
withindisplays.
PowerMeterenablesnon-auto-
matedmeasurements. Shift + Power
Meteractivatesthe Light Source.
Enter
executes
a command.
Shiftinconjuction with
otherkeysexecutes
extendedfunctions.
Autotest
performs
a test.
Shift +
Autotest
sets the
reference.
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 5
Battery
Test Key
Wavelength
LEDIndicators PASS/FAIL LEDIndicator
Remote adapter ports
Receive 1 Transmit 2
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 6
Chapter 1 - Introdu tion
The Complete Fiber Solution
CERTIFIBER is the most advanced hand-held
certi ication tool or iber links, designed to
be the complete solution or pro essional
cable installers, service providers, and net-
work administrators.
With the push o a button, CERTIFIBER certi ies
two multimode ibers simultaneously at both
wavelengths.
Rather than just providing a number, CERTIFIBER
analyzes the iber link and determines
whether cabling and network standards are
met.
CERTIFIBER and CERTIFIBER REMOTE have an optical
source that provides a consistent calibrated
dual wavelength light. The level o light
injected into or emerging rom the iber
network can be measured at any point so
that the per ormance o iber optic transmis-
sion paths and equipment can be accessed
quickly and accurately.
CERTIFIBER measures the optical power and at
the same time veri ies the proper installation
and operation o various iber optic compo-
nents like iber optic hub modules, repeaters,
and adapter cards. By measuring signal loss
CERTIFIBER helps you to identi y aulty patch
cables, ailing splices, bad couplers and
connectors.
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 7
CERTIFIBERs delay and length measurement
capability accurately tests the links propaga-
tion delay, which is then used to calculate
length.
CERTIFIBER incorporates a graphical user inter-
ace and descriptive menu options that guide
you quickly and easily through the com-
pletely automated certi ication or trouble-
shooting process o iber optic cabling sys-
tems.
Standard Features
 Certi ies a duplex iber link (two iber
cables) simultaneously
 Measures Optical Power Loss in the direc-
tion o data transmission or both multi-
mode wave lengths on two iber cables
without changing connectors
 Measures Length and Propagation Delay
or a dual iber cable
 Makes bidirectional measurements or
duplex iber links
 Utilizes preprogrammed test templates to
easily certi y iber optic cabling to industry
or network standards
 Pinpoints the margin available on the
tested cable above and beyond the PASS/
FAIL requirements
 Stores 1000 Autotests in memory with user-
riendly, alphanumeric names, job names,
and unique time and date stamps
 Transmits light continuously or modulated
at 2KHz
 Downloads stored test results to a
computer data-base or printing and
pro essional record management
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 8
 Utilizes interchangeable connector adapt-
ers to test multiple network connections
 Includes a custom-tailored, non-removable
impact cover or added protection
Graphical User Interface
CERTIFIBERs graphical user inter ace consists o
an LCD display, quick access menus, arrow
keys, and descriptive menu options that
simpli y certi ying and troubleshooting iber
cabling systems.
CERTIFIBERs Keypad
ON/OFF
When turned on, CERTIFIBER will display the
opening screen. To save battery power,
CERTIFIBERwill turn o automatically a ter 10
minutes without activity.
Es ape
Press Escape to return to the previous screen.
Power Meter
Press Power Meter to measure power and loss
at either 850 or 1300nm wavelength in a
manual mode.
Autotest
Press Autotest to measure Length, Power
Loss, and to obtain a PASS/FAIL analysis
against a selected standard. See Chapter 3 -
Automatic Measurements: Autotest for
more information.)
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 9
Shift
To execute one o CERTIFIBERs extended unc-
tions, press Shi t in conjunction with
AUTOTEST, Power Meter, Escape, or the arrow
keys.
Enter
Press Enter to execute the current screen
command.
Arrow Keys
The up and down arrows in the display area
indicate that more in ormation is available by
pressing the é or ê arrow keys. Press Shi t
and use the é or ê arrow keys or page up
and page down navigation. Use the ç or è
arrow keys to move right or le t within a
string o characters or editing purposes.
+ = Sour e
In addition to the ully automated test
unctions, CERTIFIBER can be operated in a
manual mode. Press Shi t + PowerMeter to
quickly trans orm CERTIFIBER into a manual
light source. Source Mode also allows you to
change the light source rom steady to
modulated.
+ = Set Referen e
Press Shi t + Autotest to set the Re erence
value or calculating the loss measurement.
See Chapter 3 - Automatic Measurements:
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 10
Setting the Reference for more informa-
tion.)
+ = Setup
Press Shi t + Escape to customize CERTIFIBER.
From any screen press Shi t + Escape to
quickly return to the Setup menu. See
Chapter 2 - Setup for more information.)
CERTIFIBER REMOTE
The CERTIFIBER REMOTE is an active and intelli-
gent ar end device that works with CERTIFIBER
to veri y optical cable transmission quality. All
in ormation is processed and trans erred to
the main unit. Both units provide a consis-
tent, calibrated light source that increases the
ease and e ectiveness o iber optic testing.
LED Indi ators
CERTIFIBER REMOTE has 4 LED indicators:
LED Color Des ription
RX1 PASS/FAIL red Fiber 1 has ailed
green Fiber 1 has passed
TX2 PASS/FAIL red Fiber 2 has ailed
green Fiber 2 has passed
850nm* green CERTIFIBER REMOTE is
transmitting at 850nm
1300nm* green CERTIFIBER REMOTE is
transmitting at 1300nm
RX1 and TX2 ** red Low Battery < 10%
TX2 ** red Battery 10 to 25%
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 11
RX1 ** green Battery 25% to 75%
RX1 and TX2 ** green Good Battery > 75%
RX1 and TX2 *** yellow Part 1 o Two Way
Autotest completed
*Press and hold the Battery button to provide a light-
source for 850 or 1300n . The appropriate wave
length LED will blink rapidly and then continuously.
**Press the Battery button to run the Battery test.
***Switch fiber connectors: RX2 to TX1, TX1 to RX2,
RX1 to TX2, TX2 to RX1.
The Keypad
ON/OFF (CERTIFIBER REMOTE)
When turned on, CERTIFIBER REMOTE will lash
the LCD power-up sequence. To save battery
power, CERTIFIBER REMOTE will turn o automati-
cally a ter 30 minutes without activity.
Battery (CERTIFIBER REMOTE)
CERTIFIBER REMOTE has a battery level indicator
that allows to check the battery i CERTIFIBER
REMOTE is not connected to CERTIFIBER. Press the
Battery button to illuminate the RX1 and TX2
LEDs on the CERTIFIBER REMOTE unit. I both LEDs
blink in red, the batteries are low and should
be replaced. I the LEDs blink green lights, the
remote units batteries are good and testing
can proceed.
CERTIFIBER REMOTE can serve as a consistent light
source or either wavelength. Simply press
and hold the Battery button. A ter the RX1
and/or TX2 LED lashes 5 times during the
battery test, the wavelength LED will blink
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 12
rapidly and then continuously to indicate
that CERTIFIBER REMOTE provides a consistent
lightsource or the wavelength indicated.
Press the Battery button to turn the
lightsource o . Press and hold the battery
button to switch to the other wavelength.
Battery
CERTIFIBER and CERTIFIBER REMOTE each require
three AA alkaline batteries. I CERTIFIBER and
CERTIFIBER REMOTE will be stored or more than
one month, the batteries should be removed.
To conserve battery li e, CERTIFIBER will turn o
automatically when no key has been used or
10 minutes.
Note
CERTIFIBER and CERTIFIBER REMOTE will not function
properly with carbon batteries. Alkaline
batteries are required.
Note
Stored Autotests and setup parameters are
stored in flash memory. They are not affected
by the battery status.
Battery Che k
To check CERTIFIBERs battery:
1. Connect the CERTIFIBER to the REMOTE unit
using a launch cable.
2. Turn both units on.
3. Press F2 to display the About screen.
The Version In o screen displays CERTIFIBER and
CERTIFIBER REMOTEs remaining Battery power,
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 13
the Serial #, and the Hardware and Soft-
ware Versions.
To change batteries, slide o the battery
cover located on the back o each unit.
Replace the three AA alkaline batteries and
position them according to the display in the
battery case.
Connector Adapters
CERTIFIBER has one ICA connector port (TX) and
one threaded optical receiver port (RX) which
accepts di erent connector adapters.
Attach the included connector adapters to
the CERTIFIBER and CERTIFIBER REMOTE RX receiver
ports be ore connecting jumpers.
Note
Keep the connectors covered when the units
are not in use.
Both units have covers to protect the
connectors from dirt. Keep the adapters
covered when the units are not in use.
This helps to ensure that contaminants
from handling fiber do not affect test
measurements.
Technical Support
Visit the Fluke Networks website at
www. lukenetworks.com. Send email to
luke-assist@ lukenetworks.com.
To order accessories or get the location o the
nearest Fluke Networks distributor or service
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 14
center, call:
 USA: 1-888-99-FLUKE (1-888-993-5853)
 Canada: 1-800-363-5853
 Europe: [phone]
 Beijing: 86 (10) 6512-3435
 Japan: [phone]
 Singapore: [phone]
 Anywhere in the world: [phone]
For operating assistance in the USA, call 1-
800-283-5853.
Product Versions
To display the hardware and so tware ver-
sions o CERTIFIBER connect the units using a
duplex cable.
1. Turn the units on.
2. Press F2 to display the
About screen.
The Version In o screen dis-
plays CERTIFIBERs and CERTIFIBER
REMOTEs remaining Battery
power, the Serial Numbers,
and the Hardware and So t-
ware Versions.
3. Press Es ape to return to the CERTIFIBER logo
screen.
Editing with CERTIFIBER
Several screens allow ield editing. For ex-
ample, the owner and company names, the
Autotest name, and certain numeric values
can be edited.
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 15
An editable ield contains up to 12 alphabetic
and special characters.
The ollowing example shows you how to
edit a ield.
1. Open a screen that contains an editable
ield and press Edit to display the Edit
screen.
The Edit screen contains the ield you want
to edit, and a spin wheel. The irst character
in the editable ield will be highlighted.
2. To enter a new name or
number press F2 (Delete) to
delete the character at the
cursor.
3. Use the é or ê arrow key to
scroll through the characters
(letters, numbers, and special
characters).
4. Spin the wheel to the
character you want to select.
5. Press Enter to select the irst letter as an
upper case letter and to move the highlight
automatically onto the next position.
6. Use the é or ê arrow key to spin the
wheel to the letter you want to select.
7. Press Shift + Enter to select the second
letter as a lower case letter.
8. Repeat steps 3 through 7 until the ield is
completed.
9. Press F1 (OK) to exit the Edit screen.
All manuals and user guides at all-guides.com

CERTIFIBER ENGLISH - 16
Getting Started
CERTIFIBER certi ies a iber link in seconds using
the one-button Autotest.
To run an Autotest proceed as ollows:
1. Set the re erence value. See Chapter 3 -
Automatic Measurements: Setting the
Reference for detailed information.)
2. Attach the cable to be tested to CERTIFIBER
and CERTIFIBER REMOTE s connectors.
Note
One fiber needs to be connected from RX2 to
TX2, the second fiber needs to be connected
from TX1 to RX1
3. Select a iber standard. TIA 568B and ISO
11801 are the most widely used iber stan-
dards.
4. Press the Autotest button.
5. Enter the number o splices and connec-
tors.
6. Press F1 (Run).
CERTIFIBER will now run the length, propaga-
tion delay, and dual iber loss measurements
or 850nm and 1300nm and provide a PASS/
FAIL analysis based on the iber standards.
7. Press F1 (Save) to name and store the test
result or each iber. See Chapter 3 - Auto-
matic Measurements: Autotest for detailed
information.)
8. Press F2 (View) to display test results and
move between ibers.
All manuals and user guides at all-guides.com