Fluke Express 3 User manual

Network Time Machine
Quick Start Guide: Express 3 Model
Your Network Time Machine (NTM) comes with the software already installed and licensed.
After you have unpacked it from its shipping container, proceed as follows:
1. Install the NTM in a 19-inch rack.
2. Connect cables as shown in the figure below.
3. Turn on the AC power and wait for the server to boot up.
4. When the Windows 2008 Server login screen appears, login with username operator and
password ClearSight1.
5. Start the NTM application by selecting Start > All Programs > ClearSight Distributed >
ClearSight Network Time Machine Distributed Agent Manager.
6. After it launches, add the Agent:
!Host: localhost
!Username: Admin
!Password: (leave blank)
7. Connect to the Agent.
Connect a USB
keyboard and
mouse here.
Connect the
power cables
here.
Connect these Ethernet
ports to the network(s)
from which you want to
monitor, capture frames,
and
p
erform anal
y
sis.
Connect a
monitor here.
Connect one of these Ethernet
ports to your control network for
remote operation of this NTM.

©2010 Fluke Corporation. May 2010. All rights reserved. Printed in USA.
Contacting Fluke Networks
www.flukenetworks.com
[email protected]
[phone]
•Australia: 61 (2) 8850-3333 or 61 (3) 9329 0244
•Beijing: 86 (10) 6512-3435
•Brazil: 11 3759 7600
•Canada: 1-800-363-5853
•Europe: [phone]
•Hong Kong: 852 2721-3228
•Japan: 03-6714-3117
•Korea: 82 2 539-6311
•Singapore: 65-6799-5566
•Taiwan: (886) 2-227-83199
•USA: 1-800-283-5853
•Anywhere in the world: [phone]
Visit our website for a complete list of phone numbers.