Fluke 2AC VoltAlert Instruction manual

2AC is the latest product in the
VoltAlert™ ac non-contact voltage
tester family from Fluke. The 2AC
is pocket-sized and easy to use.
Just touch the tip to a terminal
strip, outlet, or cord. When the
tip glows red you know there’s
voltage in the line. Electricians,
maintenance, service and safety
personnel, as well as homeown-
ers, can quickly test for energized
circuits and defective grounds on
the factory floor, in the shop, or
at home.
Technical Data
Features and benefits
• NEW! Always on, using special low-power
circuitry to sustain battery life and ensure your
2AC is always ready
• NEW! Innovative ‘Battery Check’ button
function ensures battery is in good condition*
• Voltage detection from 90 to 1000 V ac,
suitable for a wide range of residential,
commercial and industrial needs
• Category IV – 1000 V overvoltage rated
product for best in class user protection
• Integrated clip design, optimized for pocket
storage
• Powered by 2 AAA batteries (included)
• Fluke ruggedness and reliability,
two-year warranty
*Use of Battery Check function is optional and for convenience only.
It is not intended as a substitute for checking the unit on a known live
source before and after use.
Specifications
Safety compliance
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.),
CAN/CSA-C22.2 No. 61010-1-04, and
ISA-82.02.01, Pollution Degree 2
EMC compliance
Meets IEC 61326-1:2006
Operating
90 V ac to 1000 V ac
Temperature
Operating: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -10 °C to 50 °C (14 °F to 122 °F)
Humidity
0 % to 95 % (0 °C to 30 °C, 32 °F to 86 °F),
0 % to 75 % (30 °C to 40 °C, 86 °F to 104 °F),
0 % to 45 % (40 °C to 55 °C, 86 °F to 131 °F)
Altitude
2000 m (CAT IV 1000 V)
Cleaning
Clean with damp cloth
Battery life
Typical battery life of greater than one year
Warranty period
Two-years
2AC VoltAlert
Always on for faster,
safer voltage testing
™
.
CAT I
CAT II
CAT III
CAT IV
CAT I
CAT II
CAT III
CAT IV
CAT I
CAT II
CAT III
CAT IV
CAT I
CAT II
CAT III
CAT IV
CAT IV
1000 V

Ordering information
FLK2AC/90-1000V Non Contact Voltage Detector, 90-1000 V
FLK2AC/90-1000V5PK Non-Contact Voltage Detector, 90-1000 V, 5-Pack
Includes: Two AAA batteries, application guide, and instruction sheet
Outlet socket Electrical panel Junction box
Keeping your world
up and running.®
2 Fluke Corporation 2AC VoltAlert™
Others in the VoltAlert Family
Features
2AC
90-1000 V ac
CAT IV 1000 V
1AC-II**
90-1000 V ac
CAT IV 1000 V
LVD2
90-600 V ac
CAT IV 600 V
nnn
nnn
n
n n
n
n
n
n
Voltage Detection
On/Off Button
Dual Sensitivity
Battery Check
Audible/Silent
Voltbeat™
LED Flashlight
Battery Included
LVD2, with flashlight and dual sensitivity
1AC-II with beeper, on-off and self test
**Also available in 20-90 V low voltage version as 1LAC-II.