Flycam B-FLCM-FLN-FM User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Starter Female Flowline Body Support Rig (B-FLCM-FLN-FM)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manual
Flycam Starter Female Flowline
NOTE: The back mechanism of the support rig may come equipped with either a lever or knob mechanism
based on current availability. Rest assured, whether you receive a vest with a lever or knob mechanism,
there is no change in funconality.
Without Lever
With Lever Balance Adjustment Knob
Support Bar
Accessory Bag
Camera Hook
Suspension Line
Side Support Adjustment

2
• Join secon 1 of the support bar to
secon 2 with a simple push-t
technique.
Starter Female Flowline Setup
• Overlap both sides of the vest (chest
area) through the provided Velcro, then
adjust and buckle them up as per your
requirements.
Bag Packing
• You can stretch or loosen the adjustment
strap of the jacket, then adjust it unl
you nd it comfortable, as shown in the
image.

3
• Use the strap to adjust the chest Velcro
properly; then adjust unl you nd it
comfortable, and you can set the side
support adjustment rods according to
your body type.
NOTE: The side support adjustable vest
rods enable a comfortable t for all body
types.
• Pull the strap down from the backside
for proper ng from the shoulder, as
shown in the image.
• Overlap both sides of the vest (waist
area) through the provided Velcro and
buckle them up per your requirements.
• Adjust or ghten the vest around the
waist area through the provided strap.
• Loosen the knob of the camera hook
and aach the camera to it. Tighten the
knob to ensure a slip-free connecon.

4
CAUTION: Releasing the lever without
removing the setup may result in severe
camera damage.
NOTE: The back mechanism of the support
rig may come equipped with either a lever
or knob mechanism based on current
availability. Rest assured, whether you
receive a vest with a lever or knob
mechanism, there is no change in
funconality.
• Aach the vest safety hook to your
camera, as shown in the images, for
more safety and protecon.
• Rotate the tension adjustment knob
an-clockwise to adjust the spring
tension according to the setup weight.
NOTE: To eortlessly use the tension
release knob, start by pulling the rope
downwards, then proceed with the tension
adjustment.
With Lever Without Lever

5
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to in-
specon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our
company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR FLYCAM STARTER FEMALE FLOWLINE BODY SUPPORT RIG
ALL DRESSED UP AND READY TO GO!