Flycam Master User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assem bly Manual
Flowline Master with Edge V1 Stabilizaon Arm
(FLN-MSTR-EGV1)
2 x Washers 2 x Velcro
2.5mm Allen Key
2mm Allen Key
Edge V1
Stabilizaon
Arm
Height Riser
Flycam
Flowline
Master
Support Bar
Camera Hook
Side Support
Adjustment
Balance Adjustment
Knob

2
• Similarly, remove the second screw.
• Now, remove the Hook from the Flowline
Support Arm.
• As shown in the image, take the Cord
bundle out from the Cup and pull the Cord
unl a Cord lock comes out.
• Separate the Cord and the Cord lock.
• Keep the lock aside to re-aach it later.
• To detach the Flowline Support Rod,
pull it upwards.
Flowline Master with Edge Setup
• Loosen the screw of the Camera Hook
aached to the Flowline Support Arm using
the Allen key.
• Similarly, separate the Cord from the Cup to
mount it back later.

3
• To detach the extension from the Support
Rod of the Vest, remove its screw using a
screwdriver.
• Detach the extension from the Support Rod
and align the cord with the height riser, as
shown in the image.
• Aach the extension with the height riser
and push it inside.
Feature: Height riser that oers up to 4" of
vercal extension for taller operators and a
lockable hook to secure any camera, gimbal,
or cage eortlessly.
• Similarly, ghten the top screw using the
screwdriver.
• Loosen the knob of the Flowline Edge.
• Dissemble the Camera Hook and the
Support Rod from the Vest.
• Insert a screw in the Support rod and
ghten it using the screwdriver.

4
• Aer opening the Rod, insert the knob and
properly ghten it, as shown in the image.
Feature: Tension adjustment knob to match
your rig's weight, while the adaptable sliding
knob adjusts the support rope to your unique
lming needs.
• Insert the cord of the Flowline vest in the
Flowline Edge.
• Aer inserng the cord in the Edge, pull the
cord from the side of the Rod.
• Insert the cord into the cup and pull out.
• Aer loosening the knob, remove it and pull
the rod of Flowline Edge to open it.
Feature: Foldable Design of Flowline Edge
makes it easier to store.
• Properly aach the Edge to the owline
vest.
Feature: It aaches to your Flowline Body
Worn Systems like Basic owline hanger,
master owline hanger, and N series hanger
(300N, 400N & 500N) to provide Smooth
Floang Shots with utmost comfort.

5
• Aer inserng it into the Cup, e it properly
with the Cord Lock.
• Aach the Camera Hook to the Cup.
• Insert the screw into the Camera Hook and
secure it properly using an Allen key.
• The Flowline Edge is fully assembled with
the Stabilizaon Arm. The versale belt
system molds to t all body types.
• Aer inserng the cord in the Cup, pull it
outwards and insert it in the Cord Lock.
180° Rotaon

6
Low/ High Angle Shots
Adjust Camera Setup Posion

7
YOUR FLYCAM FLOWLINE MASTER WITH EDGE V1 STABILIZATION ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.