Flying Industry Development S2U-DC06-ANT2 User manual

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
caymart
.com
E
-
Mail:sale@
carymart
.com
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
1xReceiver: S2U-DC06-ANT2/S2U-DC09-ANT2/ S2U-DC12-ANT2/ S2U-DC24-ANT2(2 Channel/4ControlModes)
1xTransmitter: CB-2L
1xUser manual
Feature:
Wireless control,easy toinstall
ControlLights,Motors,Fans, electricallyoperated Doors/Locks/Windows/Blinds/Cars or OtherAppliances withAC110~240V or DC 0~28V.
You can turn on/off thereceiver withtransmitter(remotecontrol)fromanyplacewithinareliabledistance;the wirelessRFsignalcanpass
through walls, floorsand doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
More reliablethan fixed code;the transmitter useEV1527 Learning code,whichisup to1million codes,reducing code collision and unauthorized
code scanning possibilities.
One / severaltransmitterscan controlone /severalreceiverssimultaneously.
Twoor more transmitter&receiverssetcanbe used inthe sameplace.
Transmitting Frequency: 315MHz /433MHz
Working distanceoftransmitter andreceiver withexternalextend antenna: 2000M/ 6000ft (theoretically)
Receiver:
ModelNo.: S2U-DC06-ANT2/S2U-DC09-ANT2/ S2U-DC12-ANT2/ S2U-DC24-ANT2
Channel: 2CH
ControlModes: Toggle, Momentary, Latched, Momentary+Toggle
Coding Type: Fixed code or learning code
Coding Setting:Bylearning
Power Supply(Operating Voltage):DC6V(S2U-DC06-ANT2),DC12V 1V(S2U-DC12-ANT2),DC9V 1V(S2U-DC09-ANT2),DC24V 1V
(S2U-DC24-ANT2)
Working Voltage Range of Relay:AC110~240V or DC0~28V
PCBsize:67mm x50mm x18mm
Casesize: 75mm x54mm x27mm
StaticCurrent: ≤6mA
MaximumWorkingCurrent: 10A/ eachchannel
ExternalExtendAntenna:
FrequencyRange: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
CableLength: 150cm
Weight:35g
Anti-interference,waterproof, shielded wire set inside
Magneticstand design for easytoinstall
Transmitter:
ModelNo.: CB-2L
Channel: 2CH
RemoteControlDistance: 1000m/3000ft (theoretically)
Encode:Encode:EV1527 Learning code (up to1million codes, reducing code collision andunauthorized code scanning possibilities.)
Unitsize: 135mm x42mm x25mm
Power Supply: 1x6F22-9V battery(included,canbe usedfor 12months)
Usage:
Setting differentcontrolmodes(We havesetthe receiver asTogglecontrolmode before delivery.Ifyou wanttouseother controlmodes,do as
following operation):
Setting controlmode Toggle:Only connect Jumper-2.
Controlmode Toggle:Press ->On; Press again->Off.
Press bigbutton:Turn onrelay1(connectBand C, disconnectAandB)
Press bigbuttonagain: Turnoff relay1(disconnectB and C,connect A and B)
Presssmallbutton: Turnon relay 2(connectB and C, disconnectA and B)
Presssmallbutton again:Turn off relay2(disconnectBand C, connect Aand B)
Setting controlmode Momentary:OnlyconnectJumper-1.
Controlmode Momentary: Pressand hold->On; Release->Off.
Press and holdbigbutton:Turn onrelay1(connectBand C,disconnect Aand B)
Releasebigbutton:Turn off relay 1(disconnectBand C,connectA and B)

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
caymart
.com
E
-
Mail:sale@
carymart
.com
Press and holdsmallbutton:Turn on relay2(connectB andC, disconnect Aand B)
Releasesmallbutton: Turn off relay2(disconnectB and C,connectAand B)
Setting controlmode Latched:Disconnect Jumper-1 and Jumper-2.
Controlmode Latched:Press ->On, another relayOff;Press another button->Off.
Press bigbutton:Turn onrelay1(connectBand C, disconnectAandB)
Turn off relay2(disconnectB andC, connectAand B)
Presssmallbutton: Turnon relay 2(connectB and C, disconnectA and B)
Turn off relay1(disconnectB andC, connectAand B)
Setting controlmode Momentary+Toggle: ConnectJumper-1 and Jumper-2.
Controlmode Momentary(Channel1):Press ->On;Pressagain->Off.
Press and holdbigbutton:Turn onrelay1(connectBand C,disconnect Aand B)
Releasebigbutton:Turn off relay 1(disconnectBand C,connectA and B)
Controlmode Toggle(Channel2):Press and hold->On; Release->Off.
Presssmallbutton: Turnon relay 2(connectB and C, disconnectA and B)
Presssmallbutton again:Turn off relay2(disconnectBand C, connect Aand B)
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
Learning the button ofremotecontrol:
1) Pressthe button of receiver;signalLEDonthe receiver keepsshining.Thereceiver enters intostatus ofLEARNING.
2) Press anyone buttonon remotecontrol.IfsignalLEDflashesquickly15 times and turnsoff,it means learning issuccessful.
3) Whenreceiver is inthestatus of LEARNING, pressagainthe button of receiver, signalLEDturns off, learning process will be discontinued.
4) The receiver can learn severalremotecontrols withdifferent codes.
Application: ForDC12Vmotororlamp
Jumper-2
Jumper-1
Button
Jumper-2
Jumper-1
Button
SignalLED
PowerLED
Antenna
RFmodule
Antenna
RFmodule
PowerLED
SignalLED
IC
IC
Relay1
Relay2 Relay1
Relay2
_
+
A B C A B C
M
_
+
Powersupply
Motor 1 Motor 2
M
+
+
DC0~28V / AC110~240V
Application Circuit
Powersupply
A, B=NormallyClosed;B,C=NormallyOpen.
Lamp1
Lamp2
_
+
A B C A B C

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
caymart
.com
E
-
Mail:sale@
carymart
.com