Godox LR180 User manual

Instruction Manual | 说明手册Chinese English Bilingual | 中英文双语
705-LR1800-00
地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋
Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: [phone](8062) 传真/Fax: [phone]
邮箱/E-mail: [email protected] http://www.godox.com
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
Made In China
LED Ring Light
LED环形灯
LR180

- 05 - - 06 -
七、产品参数
LED环形灯
DC电源供电
功率
色温
100%光照度(LUX)(1米) 黑壳 白色透光板
黄色透光板
粉壳 白色透光板
黄色透光板
CRI(最大亮度)
TLCI(最大亮度)
调光范围
灯珠数量
工作环境温度
产品尺寸
重量(带一片透光板)
LR180
16.8V/2A
约27W
黑色壳体：3300K或5600K
粉色壳体：3100K或5000K
约600
约400
约600
约500
≈92
≈97
亮度可调
180个
-10~50度
36.1*46*4cm
880g
Foreword
Warning
Thank you for purchasing this Godox Product!
This LED Ring Light LR180 is suitable for almost all shooting occasions, which can offer
lighting for live, make up, portrait shooting, video, wedding, children photography, etc.
There are black version and pink version for choice.
Features:
● Two kinds of color temperature: achieve different color temperature by changing its
light-passing board.
Black version: the color temperature of yellow light-passing board is 3300K while the
white light-passing board is 5600K.
Pink version: the color temperature of yellow light-passing board is 3100K while the
white light-passing board is 5000K.
● Stepless light brightness adjustment.
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent to
an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of waterproof
in rainy or damp environment.
Do not use the flash unit in the presence of flammable gases, chemicals and other
similar materials. In certain circumstance, these materials may be sensitive to the
strong light emitting from this flash unit and fire or electromagnetic interference may
result.
As this product has built-in lithium battery, do not disassemble, impact, squeeze or
put it into fire. If serious bulge occurs, please do not use. Do not use or store the
product if the ambient temperature reads over 50℃. Please charge the product with
specialized charger and correctly operate it within the defined voltage and working
temperate according to the instruction manual.

01
07
0304
05
08
06
02
- 08 -
Body
01. Light-passing Board
02. Main Body
03. Power Switch
04. Select Dial for Light Brightness
05. DC Power Jack
06. Mounting Bracket
07. Heat Dissipation Slot
08. Smartphone Holder
Mirror Installation Slot
- 07 -
Included Items
1. LED ring light 2. Adapter 3. Smartphone holder 4. White light-passing board
Power Management
1. Power Supply
Using DC power jack: use an adapter to connect the light with the DC power supply.
(1)(3)(2)
(4)

3. Light Brightness/Color Temperature Adjustment
Adjusting Light Brightness
Turn the Select Dial for Light Brightness to the
counterclockwise end, and the light is in the minimum
brightness. Turn the Select Dial for Light Brightness to
the clockwise end, and the light is in the maximum
brightness.
- 09 - - 10 -
Operation
1. Before Usage
Connect the light with the DC power supply.
2. Power ON/OFF
Press the power switch to power the LED ring light
on or off.
5. Install and Detach the Light-passing Board
Install: Aim the arrow on the light-passing board at the unlocking point and turn it
towards the direction of locking point. Then, press the edges of board to make sure
it is firmly fixed.
Detach: Turn the light-passing board towards the direction of unlocking point and
take it out.
Technical Data
Adjusting Color Temperature
Change its light-passing board (the yellow light-passing board is separately sold.)to
gain different color temperature.
Black version: the color temperature of yellow light-passing board is 3300K while
the white light-passing board is 5600K.
Pink version: the color temperature of yellow light-passing board is 3100K while the
white light-passing board is 5000K.
3300K5600K
安装 拆卸
Install Detach
LED Ring Light
DC Power Supply
Power
Color Temperature
100% Brightness
(LUX) (1M)
CRI(max. brightness)
TLCI(max. brightness)
Light Brightness Range
LED Beads Quantity
Operation Temperature
Dimension
Weight (with one light-passing board)
LR180
16.8V/2A
Approx. 27W
Black version: 3300K or 5600K
Pink version: 3100K or 5000K
600
400
600
500
≈92
≈97
Light brightness can be adjusted.
180
-10~50
36.1x46x4cm
880g
White light-passing board
Yellow light-passing board
Black
version
Pink
version
White light-passing board
Yellow light-passing board

- 11 - - 12 -
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.