Lightolier Lytecaster 1100IC User manual

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E1008
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster®Recessed Downlighting 1100IC
Page 1 of 1 6 3/4" Aperture Incandescent Insulated Ceiling Frame-In Kit
Lightolier is a Philips group brand
1100ICM
FRAME-IN KIT
REFLECTOR TRIM
9"
7 5/16"
15 1/2"
11 1/8"
1
3
4
5
6
7
2
Ceiling Opening
6 13/16" Dia.
Features
1. Housing: 0.026" (#20 ga.) galvanized steel. U.L. listed for direct contact
with thermal insulation. Access door for inspection of junction box.
2. Mounting Frame: 0.036” (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1” thick. ICM version has 3/8” deep integral lip. Four slots
are positioned 90° apart to simplify alignment. Push-in/twist-out rotoclips
hold reflector flush to ceiling.
3. Junction Box: 2” x 4” x 4”, 0.063” (#14 ga.) galvanized steel. U.L. listed
for, maximum of 6 No. 12 ga., 90°C through branch circuit conductors.
Quick release “L” shaped cover for outside access to wiring. Access door
inside of housing allows easy inspection of wiring without removal of
housing. Integral cable clamps permit attachment of nonmetallic Romex®
or armored cable without the need for additional connectors.
4. Mounting Bars: 0.059” (#16 ga.) galvanized steel. 13” long bars extend to
27”, rotatable and lockable, with integral T-bar tabs. Attach to wood joist
or T-bar ceilings without need of accessories.
5. Socket Housing: Impact extruded aluminum or galvanized steel.
6. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.
7. Thermal Protector: Meets NEC and U.L. requirements. Located inside
housing.
Options & Accessories
Mounting Bars: 1976 - 13" set of (4)
Plaster Ceiling Ring: 1961 - 7/8" depth for wet plaster ceilings.
Not for use with ICM housing.
Extra-Thick Ceiling Mounting Ring: 1967A - up to 2" thick ceilings.
Labels
UL (Type I.C., Suitable for Damp Locations), I.B.E.W.
Romex®is a registered trademark of General Cable Industries Inc.
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
1100IC
1100ICM
3/8” Integral
Plaster Lip
Open Downlight Adjustable Enclosed
Diffuser
Wall
Washer
Reflector Satin
Cone
Sloped
Ceiling Baffles Basic White
Cross
Blade
Recessed
Line Volt.
Recessed
Low Volt.
1143
1144
1144CD
1108†
1110†
1131
1131WH
1131GD
1131CL
1131BK
1133
1133WH
1133GD
1133CL
1133BK
1154
1105
1105WH
1175
1176
1176WH
1179M1
1179WH
1170M1
1171
1132 1129†
1129CD†
1129WH
1129CL†
1129GD†
1129BK†
1155
1155WH
1158
1160
1161
1161WH
1163
1164
1121
1124
1126
1128
1134
1177SH
1178SH
1190
1185
1186
1186WH
Cone: Eyeball: Open Wet:
1112†
1113†
1113BK†
1113CD†
1113WH
1122
1122WH
1123
1123WH
1182
1184WH
1184CD
†Add NM to catalog number for Natural Metal flange finish.