for Living Summerland User manual

Summer land Gazebo
Product No. 088-2021-0
Model No. D-GZ136PST-P
Toll-free: 1-877-483-6759
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.
Production Number:
xxxxxxxx
Assembly Instructions

Imported for Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

•This product is intended for domestic outdoor use only.
•The product should be placed and assembled on flat, horizontal ground.
•Consult with your local governing authority/local municipal codes regarding installation of temporary structures
before assembly.
•Ensure there is enough clearance around the product. Before assembling the gazebo, make sure to leave a distance
of not less than 6’ (1.8 m) from any structures or obstructions, such as fences, garages, houses, overhanging branches,
laundry lines, or electrical wires.
•Anchor the gazebo to the ground with stakes for added safety. Stakes are provided to secure the gazebo to the ground.
If you wish to secure the gazebo to a concrete or wood surface, use anchors suited for these surfaces (anchors not
included). Do not assemble the gazebo on sandy, muddy or loose soil, as stakes do not have enough anchorage in these
types of soil.
•If more than one gazebo is set up, keep a minimum distance of 10' (3 m) between the gazebos.
•Any assembly or maintenance of the product must be carried out by adults only.
•Make sure there is sufficient manpower when assembling or moving the product.
•Some parts may contain sharp edges. Wear protective gloves if necessary.
•Check all nuts and bolts periodically for tightness. When required, tighten them.
•Repairing and replacing parts should be done by a qualified technician.
•This gazebo is intended for decorative and sunshade purposes only.
•The gazebo is not designed to withstand harsh weather, including high winds, rain and snow. Always remove the gazebo
in such heavy weather conditions, otherwise it might tip over and cause damage to the product or injuries to bystanders.
•During snow days, use the support post to make the roof more stronger, remove the snow at the top when the snow is
thicker than 4" (10 cm).
•After a period of time, usually in 2–3 months, tighten all the bolts.
•After a period of use, rinse the ash on top of the gazebo using water. Avoid using acid or alkali wash lotion.
•Do not hang any weights on the roof frame.
•Do not climb onto the roof of the gazebo. Falling off the gazebo can result in serious injury.
•After a few years, if the paint peels off, use paint of similar colour. It is recommended to use outdoor paint.
•Retain the original packaging to store the gazebo.
•If the product will not be used for a long period of time (e.g. winter time), it should be disassembled and stored in
a clean, dry environment.
3
Table of ContentsImportant Safety Instructions
Table of Contents 3
Important Safety Instructions 3
Part List 4
Assembly
5
Cleaning and Maintenance
6-17
Technical Data
18
Warranty
General Requirements
18
18
Warning! To reduce the risk of serious injury, read the following safety instructions before
assembling and using the gazebo.
Caution!
Caution!
Always keep children under close supervision while they are playing around this product.
Never leave children unattended. Keep pets away while setting up the gazebo.
Check municipal by-laws prior to installing the gazebo.
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY

4Product No. 088-2021-0 •Model No. D-GZ136PST-P
Parts List
WW
Bolt M6*20 - 28+2Spare
AA H02020C11
BB H19001C11
CC H02040C11
H00001C12
Flat Washer M6 - 44 + 3 Spare
Bolt M6*40 - 8 + 1 Spare
P91204A07001
Plastic Cap M6 - 16 + 1 Spare
GG P12401A01001
Stake Dia. 8*180 - 12
Wrench M6 - 2
1A P11014D01102
Left Frame - 4
1B P11015D01102
Right Frame - 4
1C P11190B01102
Post - 4
2A P11411B01102
Big Top Connector - 1
2B P12601A01102
Hook - 1
2C P10345B01102
Slant Beam For Big Roof - 4
Middle Beam For Big Roof - 4
3A P00101A21010
Large Canopy - 1
3B P11449B01102
Small Top Connector - 1
3C P10241A01102
Slant Beam For Small Roof - 4
3D P00102A21010
Small Canopy - 1
E P00315A21901
Mosquito Netting - 1
F P90701A07001
Ring- 48 + 3 Spare
FF H13001C11
M6 Spring Washer - 28 + 2 Spare
DD H14001C11
Nut M6 -8 + 1 Spare
2D
P10413B01102

Needed for assembly: (The following tooling not included in the package)
Hammer Screwdriver Ladder 2 people
5
General Requirements
Caution!
•Proper placement of the gazebo is essential. Do not place the product underneath
electrical lines.
•Keep children under close supervision while they are playing around this product.
This product contains small parts which can be swallowed by children.
Keep fingers away from places where they can be pinched or trapped.
•
•
•
•
Do not attempt to assemble the gazebo if any part is missing.
Do not light any fires inside or near the product!
Stay calm if fire breaks out. Search for the nearest exit. Do not return to the gazebo
before firemen allow you to do so.
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-877-483-6759
If you have questions regarding your product, require warranty assistance,
or have damaged or missing parts, please call our customer service toll-free helpline.
Contact us for assistance, we’re here to help.
IMPORTANT: Please read and understand this manual before any assembly. Before beginning the assembly of
product, make sure all parts are available. Compare parts list with packaging contents. If any part is missing, or
if you have any questions, contact the service centre at 1-877-483-6759 (toll-free).
Unpack and place all the parts from the packaging box in an open area and position them on the floor. Remove all
packing materials and place them back into the box. Do not dispose of the packing materials until assembly is complete.
Read each step carefully before beginning any assembly and make sure you understand each step. If you are missing
a part, please call our toll-free number for assistance: 1-877-483-6759.

6Product No. 088-2021-0 •Model No. D-GZ136PST-P
Assembly
1
4X
4X
12X 12X 12X

7
Assembly
2
4X
8X 8X 8X 8X

8Product No. 088-2021-0 •Model No. D-GZ136PST-P
Assembly
3
4X
8X 8X 8X 8X

9
Assembly
4
4X
1X
4X 8X 4X
CLICK!

10 Product No. 088-2021-0 •Model No. D-GZ136PST-P
Assembly
5
4X
4X 8X 4X
CLICK!

11
Assembly
6
1X

12 Product No. 088-2021-0 •Model No. D-GZ136PST-P
Assembly
7
1X 4X
CLICK!

13
Assembly
8
1X

14 Product No. 088-2021-0 •Model No. D-GZ136PST-P
Assembly
9
1X
CLICK!

15
Assembly
10

16 Product No. 088-2021-0 •Model No. D-GZ136PST-P
Assembly
11
1X
1
Please do the matching of
zippers for different panels
as showing the picture
6x
6x

17
Assembly
12
12X

18 Product No. 088-2021-0 •Model No. D-GZ136PST-P
Cleaning and MaintenanceTechnical DataWarranty
Dimensions (L x W x H)
3.09 x 3.09 x 3.04 m
10.13'x 10.13' x 9.97'
Product weight 142 lb
64 Kg
This For Living™product carries a one (1) year warranty against defects in workmanship and materials.
Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period,
when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear
or breakage due to misuse and/or abuse.
Caution!
•
Check all screws and nuts periodically for tightness; fasten them as required.
•
•
Disassemble the gazebo in reverse order of the steps used to assemble.
Always disassemble the gazebo completely. A partially-disassembled gazebo is
not stable enough to resist wind and bad weather, and therefore can be damaged
and/or cause damage.
•
•
•
•
•
Clean the gazebo gently with water using a sponge.
Do not use abrasive materials, wire brushes, chemicals, cleansers or bleach.
Do not use a pressure washer.
Rinse well. Allow it to air dry.
Steel components of garden accessories and furniture are treated with rust-inhibiting paint. However, due to
the nature of steel, surface oxidation (rusting) will occur if this protectivecoatingis scratched. This is anatural
process. To minimize this condition, it is recommended to carefully assemble/handle the product, in order to
prevent the paint from being scratched. Surface rust can be removed easily using a very light application of
common cooking oil. If surface oxidation (rusting) occurs and no measures are taken to correct it, the oxidation
may start dripping onto the assembly surface, which may cause stains that may be difficult to remove.