FOREDOM Work Bench System User manual

Components:
Part No. / Product Name / Description
MAMH-13 Dual Motor Hanger – Base mount with
supplied wood screws, 2 spring safety hooks, hex key
MALB-1 LED Light Bar – with Shade
31.5″(80cm) long. For 115 Volt or 230 Volt.
630 Lumens, 9 Watt, 24 Volt.
MAAH-B Bur Holder Arm – 2 tiers hold 95 burs:
Top tier holds 57 burs with 3/32″shanks Bottom tier
holds 38 burs with 1/8″shanks Arm: 12″long x 2″wide
x 1-1/4″high (30cm x 5cm x 3cm)
MAAH-J 6 Jar Arm – Holds 6 –1.35 oz. (40ml)
plastic jarswith screw-on tops. Jars are 1-1/2″(3.18cm)
in diameter Arm: 12″long x 2″wide x 2-1/2″high
(30cm x 5cm x 6cm)
MAAH-P Peg Arm – 5 angled, stainless pegs on
each side of arm which has non-scratch felt along
upper edge. Pegs are 1-1/2″long x 5/16″in diameter
(3.7cm x 0.8cm) Arm: 12″long x 4″wide x 1-1/2″high
(30cm x 10.2cm x 3.7cm)
MAAH-M Magnetic Arm – with non-scratch felt
surface Arm: 12″long x 1/2″wide x 1-1/2″high
(30cm x 1.2cm x 3.7cm)
MAAH-T Tray Arm – with movable partitions
Arm: 12″long x 2-1/4″wide x 1-1/4″high
(30cm x 5.8cm x 3cm)
MAAM-L Support Rod 25.75″long, .875″diameter with
MABC-3 mounting plate
MAAM-S Support Rod 17.75″long, .875″diameter with
MABC-3 mounting plate
MAAH-HR Dual Handpiece Rest – holds 2 ex shaft
handpieces. 51⁄4″ long x 31⁄4″wide x 11⁄2″high (13.3cm x
8.3cm x 3.8cm)
MAAH-H Multi Handpiece Arm – holds 6 handpieces.
Arm: 12″long x 21⁄4″wide x 11⁄4″high
(30cm x 5.8cm x 3cm)
Replacement Components:
Part No. / Description
UAL018 Adapter Plug for light
UAL016 Light Connector Cordset
UAL013 Light Shade
UAL012 Micro Switch for light
UAL007 LED Light Strip
UAL008 Light Shade
UAL015 Hanger Hook with spring
MAJAR 40ml Plastic Jar with Cap
MAJAR-6 40ml Plastic Jars with Cap, 6pk
UAL302 4mm Head Hex Screw to tighten arms
onto upright rod
MABC-3 Base Mounting Plate
Safety Instructions
Before using your Foredom power tool,
please read safety instructions. They are for
your protection and should always be
followed to reduce the risk of personal
injury or damage to the tool.
•Always wear proper eye and face protection.
Wear safety glasses or face shields whenever
you operate a Foredom or any power tool to
prevent serious eye or face injuries.
•Secure the work piece or item that you are
working on in a vise or other work holding
device. Holding it with your hand can result in
serious hand injury.
•Always use a proper dust collection system or
wear a respirator to prevent the inhalation of
dust particles, polishing compounds, or other
debris into the lungs.
Foredom Electric Company
16 Stony Hill Road, Bethel, CT 06801 USA
Tel: [phone] •Fax: [phone]
Email: [email protected]
www.foredom.net
•Do not wear loose tting clothing or jewelry.
Loose clothing or jewelry can become entangled
in the rotating accessory. Do not wear items
such as neckties, necklaces, or bracelets when
operating power tools. Be sure to tie back or
secure long hair.
•Secure ex shaft power tool to motor
hanger or work surface. Flexible shaft
power tools can “jump” at start up or
vibrate during operation. The tool should
be properly secured in order to prevent it
from vibrating off of the motor hanger or
work bench.
•Never operate any accessory at speeds above
its maximum rated speed. When properly used,
all of Foredom’s accessories can be operated at
the speed ratings listed in the Foredom Acces-
sory Catalog or specied on kits and packages.
Always nd out the manufacturer’s speed rating
before using accessories other than those
from Foredom.
F-1362 2/17 n
FOREDOM®
Work Bench System
Be sure to read
the set-up and
assembly instructions
before installing the
Work Bench System!
MAAH-B
MAAH-J
MAAH-P
MAAH-M
MAAH-T
Foredom®Work Bench System
All components are available separately.
Flex shafts, tools and
rotary accessories
not included.
Flex shafts, tools
and rotary accessories
not included.
MAMH-13 MAAM-L MAAM-S
adjustable 25.75″ 17.75″
height
MALB-1
MAAH-H
MAAH-HR
Shelf Arms swing 180°
horizontally for easy access
to compact tools such as a
micromotor, lter hood,
wax carver, and more.
MAAH-S Medium Shelf –
Arm: 101⁄4
″x 83⁄4 ″ (260mm x 220mm)
MAAH-S2 Small Shelf – Arm: 43⁄4
″x 6″
(120mm x 155mm)
MAAH-S3 Large Shelf – Arm: 91⁄4
″x 131⁄4 ″
(235mm x 335mm)
MAAH-S Shelf Arm
Contact your favorite Foredom dealer for Foredom Work Bench System components or replacement parts.
Components and replacement parts are also available on our website www.foredom.net

Base Plate
Upright Rod
Bur Holder
Arm
Light Bar
Angled Extension
Rod
Set Screw
Set Screw
Motor Hanger Springs
FOREDOM®
Work Bench System
Mounting Instructions
First determine where to mount the Motor Hanger
or Support Rod on your bench. Right handed ex
shaft users typically mount a hanger on their right
and left handed users on their left. Motors should
hang 33″to 38″above the work area, as measured
from the top of the motor, and 20″to 28″off to the
right or left side of your work piece.
1. Firmly attach the Base Plate to the bench top us-
ing the three supplied wood screws. Make sure that
the plate is oriented so that you can easily tighten
the set screw which holds the rod in place.
2. Insert the Upright or Support Rod into the base
plate. You may need to rst loosen the set screw in
the base to allow the rod to bottom out. Re-tighten
the screw when the rod is fully mounted.
3. With the rod securely in place, mount Component
Arms in your preferred order by sliding each down
from the top of the rod. You may have to remove the
set screw on the top of an Upright Rod, unscrew the
top cap on a Support Rod, and/or loosen the Arm set
screws to slide them down. Tighten the set screw on
each Arm once it is in position (arm heights can be
adjusted after everything is mounted). Component
Arms swing horizontally 180º to keep accessories
and small tools within reach, or stored out of the
way when not needed.
4. If you have the Light Bar: With Component
Arms in place, slide the Light Bar on to the Upright
or Support Rod at the top and tighten the set screws
or screw on the cap. Adjust the light bar mounting
bracket to insure that the bar illuminates the work
area and the shade faces the user. The Light Bar
should be able to pivot upward 90° to the ‘Off’
position without making contact with motors or
other objects that would prevent it from moving
from one position to another. When the Light Bar
is horizontal (and plugged in) it lights up.
5. Once all arms are in nal position, you can plug
the light connector cord into the adapter and then
power outlet. Remember: When plugged in,
Horizontal is On and Vertical is Off.
6. If you have the Motor Hanger: Install the
Angled Extension Rod into the top of the Upright
Rod. Make sure that the set screw is backed out a
little before installing the Extension Rod.
a. Install the Springs onto the angled Extension
Rod and use the “V” portion of the Spring(s) to
suspend the motor bale(s).
b. Swing the angled Extension Rod to move the
motors into proper position and tighten the set
screw on the top of the Upright Rod to secure the
Extension Rod. Tie wraps may be used to hold the
motor power cords to the Upright Rod.
Pivot Light Bar up and
the LED light turns off
7. Make nal position adjustments to the mount-
ing brackets on all Arms to achieve desired swing
radius. Make sure all screws are rmly tightened.
Motor Hanger Set Up
Support Rod with Light Bar only
for when you don’t need a motor hanger
Support Rod with Light Bar
and attached Arms organize any bench!
Flex shafts, tools and rotary accessories not included.