Forever Redwood THE SUNSET PATIO PAVILION User manual

ASSEMBLY INSTRUCTIONS FOR
THE SUNSET PATIO PAVILION
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
7
8
9
10
11
12
Drawing
High Wind
Standard
Description
Posts
Single Supports-A
Single Supports-B
Central Supports
In-Between Blocking
In-Between Covers
Single Lateral Supports
Roof Boards
Boots
If ordered
Tap L-Plaques
L-Plaques
Standard or High Wind Anchor
Bases
If ordered
Qty.
Will vary
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
H
Drawing
Description
5/16´´ X 3´´ lag bolts
(To attach the anchor bases to the ground).
5/16´´ X 4´´ Lag Bolts
(o attach the Single Supports-A to the Central
Supports/to attach the Single Lateral Supports to the
Supports).
3” Deck Screws
(o attach the Single Supports-A to the Central
Supports/to attach the Single Supports-A to the Short
Central Supports/to attach the In-Between Blocking to
the Supports/to attach the Single Lateral Supports to
the Supports).
3/8´´ X 8´´ bolts
(to attach the Single Supports-A&B to the post).
3/8” x 7” Bolts
(to attach the In-Between Blocking to the Supports).
3/8´´ x 2” lag bolts
(to attach the L-Plaques to the posts).
2 ½” Deck Screw
(to attach the Tap L to the posts and to the supports)
2” Deck Screws
(to attach the Roof Boards to the Supports).
Note: Dimensions of your hardware will vary depending on size.

P| 3
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
No.
.
1
2
3
4
5
6
7
8
9
10
11
12
DESCRIPTION
Posts
Single Supports-A
Single Supports-B
Central Supports
In-Between Blocking
In-Between Covers
Single Lateral Supports
Roof Boards
Boots
Tap L-Plaques
L-Plaques
Gale Wind Bases
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
NOTE: In order to know where the post needs to be placed, check the numbers on them. If the post is not marked, then place the
single Supports on the ground to locate the markings for each post position and clearly set your bearings. (“Don´t attach yet, only
place them on the ground to begin with”).
Step 1: Install the anchor bases (12). Please see the “How to anchor your pergola document” for all details. Set your post (1)in
the saddle of the anchor bases. Drill a ø ¼´´ hole in the post prior to anchoring to facilitate the ratcheting of the hardware. After
that, use 5/16´´ X 3´´ lag bolts (A)to attach each post to its respective anchor base.
Step 2: Use 5/16´´ X 4´´ Lag Bolts (B) and 3” Deck Screws (C) to attach the Single Supports-A (2) to the Central Supports (4).
Each part has a series of numbers that indicate where to attach the part with the corresponding number.
1
1
12
5/16´´ X 3´´ Lag Bolts
5/16´´ X 4´´ Lag Bolts
3” Deck Screws
1
1
4
2
2

P| 5
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
Step 3: Use 3” Deck Screws (C) to attach the Single Supports-A (2) to the Short Central Supports (4). Each part has a series of
numbers that indicate where to attach the part with the corresponding number.
Step 4: Use 3/8´´ X 8´´ bolts (D) to attach the Single Supports-A (2) to the post (1). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
2
2
3/8´´ X 8´´Bolts
3” Deck Screws
4
2
2
4

P| 6
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
Step 5: Use 3/8´´ X 8´´ bolts (D)to attach the Single Supports-B (3) to the post (1). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 6: Use 3/8” x 7” Bolts (E)to attach the In-Between Blocking (5)to the Supports. Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
3
3/8´´ X 8´´Bolts
3
3/8´´ X 7´´ Bolts
5
5
5
5

P| 7
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
Step 7: Use 3/8” x 7” Bolts (E) and 3” Deck Screws (C)to attach the In-Between Blocking (5)to the Supports. After that. Cover
the Deck Screws with taps. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 8: Attach the In-Between covers (6)to the Supports with 3” Deck Screws (C). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
3” Deck Screws
3/8´´ X 7´´ Bolts
3” Deck Screws
5
5
5
5
6
6
6
6

P| 8
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
Step 9: Use 5/16” x 4” Lag Bolts (B) and 3” Deck Screws (C)to attach the Single Lateral Supports (7)to the Supports. Each part
has a series of numbers that indicate where to attach the part with the corresponding number.
Step 10: Use 3/8” x 2” lag bolts (F)to attach the L-Plaques (11) to the posts (1), and to the supports.Each part has a series of
numbers that indicate where to attach the part with the corresponding number.
7
3/8” x 2” Lag Bolts
5/16” x 4” Lag Bolts
7
7
3” Deck Screws
7
11

P| 9
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
Step 11: Use 2 ½” Deck Screw (G) to attach the Tap L (10) to the posts and to the supports. Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
|
Step 12: Use 2” Deck Screws (H)to attach the Roof Boards (8)to the Supports. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
2 ½” Deck Screws
2” Deck Screws
10
8

P| 10
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
Step 13: Finally, attach the boots (9) to the posts with 3´´ Deck Screws (C). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
3´´ Deck Screws
9

P| 11
THE SUNSET PATIO PAVILION
www.ForeverRedwood.com
This completes the Pergola assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question,
don't hesitate to call us (866 332 2403) or email us. We are here to support you.