Forever Redwood ANNAPOLIS User manual

Annapolis Garden Arbor www.foreverredwood.com
866.332.2403 (Toll Free); 7am-7pm Pacific Time, Monday-Saturday
Assembly instructions for:
ANNAPOLIS GARDEN ARBORS

Annapolis Garden Arbor www.foreverredwood.com
Contents of boxes
Quantity
Description
Drawing
12
Carriage Bolts 5/16”x 3”
4
Carriage Bolts 5/16”x 5”
16
Carriage Bolts 5/16”x 4 ½”
16
Deck Screws 8” x 3”
4
Posts (96”) (A, B,
C & D)
4
Supports ( E, F, G
and H)
3
Trellis Walls (I &
J)
Trellis wall rear
(K)
2
Arched Roof
timbers (L & M)
8
Slats (N, O, P, Q,
R, S, T & U)
1
Lighthouse
Bench (W)
A
B
C
D
J
I
L
M
K
W
F
E
G
H

Annapolis Garden Arbor www.foreverredwood.com
CONTENT OF THE BOXES
The parts that go together have the
same numbers written next to the
predrilled holes they attach to.
Align the parts with the numbers as
shown for ease of reference.
M
B
C
H
D
K
G
I
J
E
A
STEP 1:
Attach part A (post) to part L (roof timber),
with two bolts (5/16” x 3”) washers & nuts
(into two holes marked “1”). Tap the bolt all
the way into the wood to set it. Then add a
washer and nut and lightly tighten.
F
W
L
STEP 2:
Attach part B (post) to part L (roof timber),
with two bolts (5/16” x 3”) washers & nuts (into
two holes marked “2”). Tap the bolt all the way
into the wood to set it. Then add a washer and
nut and lightly tighten.

Annapolis Garden Arbor www.foreverredwood.com
Repeat the same Steps, with the other posts, supports and roof timber. When you finish with these steps, you continue
assembly the trellis walls.
STEP 3:
Attach part E (support) to part L (roof timber)
and B (post), with two bolts, washers & nuts
(into two holes marked “3” & X). Tap the bolt
all the way into the wood to set it. Then add a
washer and nut and lightly tighten.
1 bolt
5/16”x 5”
1 bolt
5/16”x 3”
STEP 4:
Attach part F (support) to part L (roof timber)
and B (post), with two bolts, washers & nuts
(into two holes marked “4” & X). Tap the bolt
all the way into the wood to set it. Then add a
washer and nut and lightly tighten.
1 bolt
5/16”x 5”
1 bolt
5/16”x 3”

Annapolis Garden Arbor www.foreverredwood.com
STEP 5:
Attach part A (post) to part I (trellis wall),
with two bolts (5/16” x 4 ½”) washers & nuts
(into two holes marked “9”). Tap the bolt all
the way into the wood to set it. Then add a
washer and nut and lightly tighten.
STEP 6:
Attach part C (post) to part I (trellis wall),
with two bolts (5/16” x 4 ½”) washers & nuts
(into two holes marked “10”). Tap the bolt
all the way into the wood to set it. Then add
a washer and nut and lightly tighten.
Repeat steps 5 y 6 in the other posts and trellis walls
STEP 7:
Attach parts N, O, P, Q, R, S, t & U (Slats) to parts
L & M (roof timbers), with 16 Deck Screws (8” x 3”)
(two deck screws for each one)

Annapolis Garden Arbor www.foreverredwood.com
Two Bolts
(5/16”x 4 ½”)
Washers and
nuts
Repeat the
same Step
STEP 8:
Attach W (Lighthouse bench) to parts A and B
(post), with two bolts (5/16”x 4 ½”) washers
and nuts.