Forging Mount HY9190 User manual

English
Installation Instruction
UNPACKING INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
Getting Started
If you don't understand these directions or have any doubts about the safety of the installation.
Check package contents against the Supplied Parts List in the next page to assure that all components were received
undamaged. Do not use damaged or defective parts.
Carefully read all instructions before attempting installation.
Install and operate this device with care. Please read this instruction before beginning the installation, and carefully follow all
instructions contained herein. Use proper safety equipment during installation.
Do not use this product for any purpose or in any conguration not explicitly specied in this instruction. We hereby disclaim
any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
If you are uncertain about the nature of your wall, consult a qualied installation contractor.
Please call a qualied installation contractor for help if you:
1
!
Tools Required
WARNING
This TV mount must be securely attached to the vertical wall. If the mount is not
properly installed it may fall, resulting in possible injury and/or damage.
4mm Drill Bit
Phillips Screwdriver
10mm Masonry Bit
Stud Finder
Wrench or Socket Set
Carpenter's Level
Note: The mounting components and hardware supplied in this package are not designed for installations to walls with steel studs or to cinder
block walls. If the hardware you need for your installation is not included, please consult your local hardware store for proper mounting
hardware for the application.
CAUTION!
www.forgingmount.com
Slim Fixed Wall Mount
Model: HY9190
VESA: 600mmx400mm (Max)
Please read throuth these instructions completely to be sure you're comfortable with this install process. Also check your TV
owner's manual to see if there are any special requirements for mounting your TV.If you do not understand these instructions
or have doubts about the safety of the installation,assembly or use of this product,please contact US via: [email protected]
60kg
MAX

2
Supplied Parts List
(1)Left Monitor Bracket
(4)M8 Washer-F
(4)M6x35 Bolt-K
(3)Lag Bolt Washer-X
(8)5mm M6/M8
Spacer-B
(4)M4x12 Bolt-G
(4)M8x20 Bolt-L
(4)20mm M6/M8
Spacer-C
(4)M4x30 Bolt-H
(4)M4 Washer-D
(1)Right Monitor Bracket
(4)M8x35 Bolt-M
(1)Wall Plate
(4)M4 Spacer-A
(4)M6 Washer-E
(4)M6x20 Bolt-J
(4)M8x45 Bolt-N (6)M7x65mm Lag Bolt-Y (6)M10x60mm
Concrete Anchor-Z

3
Mounting the Wall Plate to the Wall
Step 1
60mm
70mm
10mm
Brick or Concrete Wall
Wall Plate
YXZ
YXZ
YXZ
YXZ
YXZ
YXZ
1.1 1.2
Wood Studs Wall
1.1
24”(609mm)16"(406mm)
1.3
70mm
4mm
1.2
Wall Plate
YX

4
Step 3 Attaching Monitor to Wall Plate
Wall Plate
Wall Plate
Monitor Brackets
Monitor Brackets
Wall Wall
G to N
D to F
A,B,C
Monitor Bracket
(if necessary)
Mounting the Monitor Brackets to a TV
Step 2
2.1 G/H/J/K/L/M/N 2.2 A/B/C (Optional)
2.3
3.1 3.2